Auto Factoids for the Week of 6/13/2010

Oh..yes I’m behind. 

There was a huge one last week.. 

6/14/1832 – Nicolaus Otto was born in Germany…”Who?”   He invented the gas motor engine. An engineer and experimenter, Nicolaus Otto invented the first practical alternative to the steam engine in 1876 — the first four-stroke internal combustion engine. He called it the “Otto Cycle Engine,” and as soon as he had completed his engine, he built it into a motorcycle. 

The Otto Motor powered Cycle

6/16/1903 – The BIGGIE….Ford Motor Company was established. On the same day in 1953 Ford introduced the power steering.  (Two for the price of one) 

Also on 6/16/1896 Jean Peugeot was born in Paris.  Founder of Peugeot the auto maker.  The family began with coffee mills and bicycles and then cars. 

6/18/1943  Tom Gale was born in Michigan, Flint to be more exact.  His Dad was a designer for Buick and his grandfather worked the assembly for Buick.  Guess where he went to work when he finished school….nope….Chrysler.. Gale became head of design in 1985.  He previously worked on the some of the iconic cars such as the E-bodies-Barracuda and Challenger and was a major contributor to the  Chrysler Portofino concept car. 

1987-Chrysler-Portofinow Concept Car

 

6/19/1947 the Tucker shows up in Chicago. 

The Tucker-Torpedo - I love these cars!!!!

And on the same day, 1969 GM produced the 4 millionth Cadillac.   

This isn't actually "THE" 4 Millionth Caddy..but you get the idea.

Thanks for reading 

Tim

Steve Sears 1992 Ford Ranger XLT and Paint

Steve Sears is one of the readers of this blog and owner of a 1982 Mercury Cougar Station Wagon (again..I love this car). 

But that’s not all, Steve does a lot of his own work, including this unique paint job on his 1992 Ranger. 

Here is his recent project. 

The before: 

1992 Ford Ranger XLT

 

Tim, 

  

I completed my project last week and thought you’d like to see it.  I painted my Ranger with a roller.  I only did six coats of each color, usually 8 – 10 coats are required.  I like to call the color Haze gray underway and white.  I spent 26 years in the Navy so I thought the gray was appropriate for me. Ha Ha.  It’s painted with rustoleum mixed with mineral spirits in a 1:1 ratio thus the many coats required.  The body prep is the same as any other type paint job except that a primer is not used over the whole truck.  I only spot primed the bare metal and over the bondo used to fix parking lot dings.  It took a full 8 days to complete the project including the paint on the topper.  I have to wait a few weeks before buffing out for a full gloss.  For that I’ll just remove the mirrors and the bug shield on the front.  The process is well documented on the web over the last 10 years or so so I won’t repeat the process.   

  

I thought your readers would be interested. Finally I have the truck looking like new again.  It’s a 1992 Ranger XLT that I had bought new on April 24, 1992.  It has the 2.3 liter four and a five speed tranny.  The picture labeled 019.JPG is the before shot is attached.  

And the after photos: 

After Pic 1

  

After Pic 2

  

After Pic 3

Thanks very much for sharing it Steve.  (A roller?  Wow!!!!)  

  Drop me your comments!!!! 

Thanks for reading 

Tim 

Auto Factoids for the Week of 5/30/2010

5/31/1927 – Mr. Ford produces the last Model T

6/2/1899 – Locomobile Co. Founded – they were in business until 1929.  They made a lot of cars, I hadn’t realized that.  Here are a couple.

1901 Locomobille - Cool..wonder what the 1/4 mile time were??

Love this one..Steam powered????

1923 48 Series Sport

6/3/1864 Ransom Olds was born in Ohio.  He developed and build cars named after him,  Oldsmobile and REO (his middle name was Eli, hence REO, hey that was a band name REO Speedwagon.

An Reo Speedwagon

I’ve never heard of the next guy, until now and did a little reading.

Barney Oldfield was born 6/3/1878.  He was a race car drive, but started out racing bike and wining silver medals in the process.  Here are a couple pics:

Early 1900's

Oh Yeah..that Henry Ford standing next to his car.

Auto Factoids for Week of 5/23/2010

Few major milestones this week. 

Brooklyn bridge opened for traffic on 5/24 1883 and the Golden opened 5/27 in 1937. 

Race car driver Mauri Rose was born 5/26/1906 currently in the racing hall of fame, placed second in the 1927 Indy 500.  Actually won the Indy in 1941, but that was a tough victory, spanning two Maserati-powered Elgin Piston Pin Specials cars, after the first one had mechanical issues.  He tossed a fit and the car owners pulled one of the other drivers on the time from the race and give Rose that car. 

The Pin 

Elgin Pin

 

What powered that thing? 

Power Plant

 

The first Kaiser-Frazer was produced 5/28/1946 – cars weren’t sold until 1947. 

1947 Willow Run Plant

Mustang Hose Woes

I was about to start the pillar moldings mini project when I ran into a couple mechanical issues.

About a week ago the Mustang began squealing when pushed to high revs.  That normally indicates one of several problems.

1. It could be a water pump

2.  It could be the power steering pump

3.  It could be a pulley

4. It could be a bolt that was holding the alternator bracket to the engine worked itself out and was in contact with the fan belt.

5. It could be a combination of the any of these.

Now the Mustang did, every once in a while, drip some fluid from the power steering control value but it wasn’t a huge deal.

Well, Saturday I went to start her and the battery was dead.  It’s over 3 years old and I had left the lights on the day before and had to have it jump started.  So off to the auto parts store I went and pick up a new 3 year battery and stuck it. When I started the engine up, it made the squeal and I decided I needed to fix this, before the pillar molding.

So with a neighbor revving the engine I noticed the bolt protruding from the water pump/block ( it passes through left side water pump housing in to the block).  With the revs the fan belt would flex and briefly hit the bolt.   This bolt was “custom” made when we were fitting everything up to reman’ed long block and was about 7 or 8 inches long.

It took a bit to get that back in place, had to loosen up the alternator’s other two supports and toss a little loctite on the threads and she was good to go…..almost…..

Yeah….option #5 above was the correct answer BTW.

Started it up and there was still a squeal – not the same squeal but clearly an ‘accompaning’ squeal.  Shortly after that a power steering hose let go and well liquid does what gravity  make it do and I spent the afternoon cleaning the driveway.  So there went my allotted time for Saturday.   So replacing both hoses seem the best way to go and they’ll  be in today.  Right now it’s at the shop down the street, I had no time to undertake this task at the moment, will be traveling the next couple weeks.

One of my travels takes me to the National Corvette Museum.  I’ll spend an entire day there which include the assembly plant tour.

Thanks for reading.

Tim

V8 Reference Book

I grab every book I think is useful in any of my hobbies.  I happened to be at the mall the other day and had some time kill and wonder down to Borders books store.  Pick up a book entitled “Ultimate American V-8 Engine Data Book” 2 Edition  by Peter Sessler, published MotorBooks.

This book has engine identification codes, component casting codes, internal dimensions and specs, and power and torque ratings.

It goes back as far as 1952 and covers Fords, GM, Mopar, and AMC, Packard and Studebaker.  It includes big blocks and small blocks.  There is a lot of information.

I learned from this book that all of the engines possible for the Corvette in 1984 were rated @ 205 hp.  The CFI was the main power supplier, but it also had listed a couple TPI’s (engine suffix code ZFC), TBI (engine suffix code ZFJ – supposedly for export only) and a 4v for California (engine suffix code ZFF).

They also inform you of the transmissions that go with the engines.

There are listings for cylinder heads parts or casting # as well as intake and exhaust manifolds as well.

I think this one is worth the  $30.00.

This is a great transition to introduce an up and coming feature for this blog.

I love engines…(duh).  To me the history of development, what was used when and where and maybe even why can be fascinating.  I’ll be tossing out specs and the like and hopefully some, ” I would have never guessed that” information.  Now, I don’t have this all in my head, it will be researched stuff or some experiences. (My 1974 Torino was a good case study..tell you the story soon).

Thanks for reading.

Tim

Abandoned Cars – Contest – Win a Hot Rod DVD

One of my favorite things are abandoned cars.  Every year I get the Hemming calendar of abandoned vehicles and look forward to various car publications that have a section where they highlight these photos.   

One of my fondest memories growing up was playing across the road from where we lived with an old Plymouth, 1950’s vintage that was left in the field.  I remember my dad saying after I asked him if it would run, that it needed a carburetor.  My brother and I tried to fashion one out of can and some metal fins from an old ice tray.  This was back in the late 60’s, we were pretty young.   

Out here in the southwest you use to be able to see them all the time.  The desert really knew how to tear down a car.  As late as the mid 90’s you could still find them along the side of the road of major highways and if you dared to head out in to the mountains of southern Arizona, trek up the nearly impassable mining roads you’d find them.  There would be anything from the 1930 to late 1950.  Some would be sitting right beside the road or a mine and many could be down the mountain a ways, not a road in sight.  When they died the owners left ’em where they fell. But often, since the road was so narrow, they would push them off the side and down the mountain.   

During the mid 1980’s and early 1990’s I spend some time in the mountain, looking for ghost mining towns and generally in join the trips with relatives.  You would find abandoned car dotting the dirt roads that wound up and down the canyons.  Somewhere in the mid 1990’s the Forestry Department started fencing off the old abandoned mines and as part of a plan to allow the areas to return to their natural state, blocking off the mountain roads to make impassible to all but the most daring 4 wheelers. eeeerrrkkkkk….I’ve been places in a 1970 Monte Carlo that some folks with 4 wheel drive won’t go.  Part of that initiative was to haul out the old wrecks that had been there for decades.  So a lot of them are gone.   

I recently began look for abandoned cars as a hobby and photograph them.  So I thought maybe some of my readers might what to join in and catalog the wrecks and their locations and well as photographs.   

Then I thought, maybe a contest would be fun.  So I’m looking for the readership to email me photos of abandoned car that you run across.  Of course there are some rules.   

What qualifies as an abandoned car?  I’m going to be pretty liberal here and we’ll extend the criteria to include neglected backyard finds as well. It has to appear to be pretty much untouched and neglected.   

Two more rules:   

You have to provide a general location and it has to be an original photo, not snagged from the internet.   

Here is one example.   

The house in the photo had been empty for some time according to the locals in Tombstone, Az.  These three cars were in the back yard covered with weeds, trees and debris.   

This a 1950's Chevy pick up. I wasn't allowed to get any closer.

 

Next in the same yard was this:   

Chevy Monte Carlo

 

And this Ford coupe:   

Ford Coupe

 

I’ve one more good one..but I’ll save that for later.  

For the first two individuals writing in with a good photo of an abandoned or neglected car, I have a DVD from the Hot Rod Magazine Library “Dream-Build-Drive” collection.  

You can email it to me (timsweet@cox.net) or post to my Facebook page (look me up: Tim Sweet).   

Thanks for reading.   

Tim

SCCA Event 4/25/2010 Auto Cross Part III

So let’s get to my runs.  As I mentioned, there were 2 sets of runs, one for time and points and one for just time.  Each was five trips on the course.

One thing they have you do is of course walk the track which is to get you someone familiar with the corners.  I walked it twice.  Once on my own and once with the novice “coach”.

This is my second auto cross.  If you’ve been a constant reader you might recall that was on Jan 25 2010 and it was mainly corvettes. We rented the area and set up our course.  I did fairly well there for my first time.  But this course was different.  A lot tighter corners in a row and two sets of very tight slalom.  Nothing a vette couldn’t handle with the proper speed and a good surface..this was not a good surface, however.

My first run was a darn right awful.  I look like some crazed speed demon with a severe hatred for orange cones. I over drove every tight corner.  My second run wasn’t much better, I didn’t even hit the first corner and then a took a cone for a ride under the vette. 

So now I feeling like a knucklehead.  I had the oldest car there and maybe the one with the most torque, but certainly not the most horse power.  My third run was better and I took along one of the novice coaches but I still had a CD (course deviation) on the backside by missing the second slalom set of cones.  I dropped off the novice coach and my 4th and fifth runs were clean as far as CD’s go but I still got a cone on each run.

So here is how it end up in the first set of 5 runs.

 84 Chevy/Corvette BS
1. DNF
2. DNF
3. DNF
4. 56.355
5. 54.616

My next runs were much better.  I did have on CD and I did get a cone, but the times were getting better. The 5th run below I took a cone and spun on the back side of the course.

1. 51.643
2. 53.146
3. 52.622
4. 51.645
5. 54.188

So I ended the day with the following times and points.

PAX Time         Points

46.260              753
43.575                  796

PAX time is like a handicap in golf, it takes the class of your car and the skill level reduces your time to keep you somewhat competitive.

Not bad for my first real “formal” event.

By the end of the I was worn out.  That is a lot of driving, in the heat (ok..only 88 degree..little hotter on the course). 

The vette performed perfectly, no over heating issues (one of my biggest fears) and nothing broken, did have to rub out a few cone marks….but I showed them whose boss!!!!

You’ll notice a lack of pic or vids on this one, didn’t have my son along as a camera man, and when I wasn’t running they put you to work resetting cones.

If you want to see the scores go to  http://www.azbrscca.org/results/index.php and you can review the results.

Thanks for reading.

Tim

SCCA Event 4/25/2010 Auto Cross Part I

The name of my blog includes “racing”.  This isn’t meant to be watching on TV and reporting back, it’s meant to be my events.  My blog title also includes  “Average” and includes budget as well.  (You might as well include ‘time’, as in average amount of time to spend on the hobby.) 

I just finished running a Sports Car Club of America (SCCA) event.  It was a blast!!  I’ll get to my times in a bit, but first, let’s talk about cost of this particular event. 

Straight up to join SCCA there is the yearly fee for the national membership and there is the fee for your regional membership. Total cost here was $80.00.   Now the events are not free.  In my regional club which run events in the Tucson areas and Phoenix as well, they have to offerings.  They have a round for points and time and they have the time only round.  There are separate prices for each. 

Today when I showed up (you can pre register and save ..I think…$10.00) filled out all the paper work and went to pay.  The fellow taking the money asked if I wanted “time only” and  I’m thinking…do I only want to be timed…so I said “No.” and he said “That will be $30.00.”  So I paid. 

Now I have co-worker who talked me into joining SCCA and he attends regular events at the local drag strip – the auto cross is held in the huge drag pit/parking area.   He cleared up my misunderstanding and said if I wanted the “full” experience I need to go back and say yes I wanted the ‘time-only’ round as well.  That cost me another $10.00. 

So putting this together we are at 120 big ones this month to race.  Not too bad, I’d have to say. 

There are more costs and I’ll get to that in next portion of this subject. 

SCCA Event 4/25/2010

Wrenchin’ Tip – Fuel Line Threads – Comment from A reader

I replaced all the fuel lines and brake lines on my 65 a few years ago, and I used this flaring tool and the thread seal that comes in a tube.  I have never had a leak, and I have never used the teflon tape.  You don’t need a real expensive flaring tool to work on these old Mustangs.

Flaring Tool

  

Soaring’s ride: 

1965 Mustang