As you know, the US government asked and eventually forced the auto industry to contribute to the war effort. This series is to highlight some of the major contributions and first up is Crosley.
Crosley produced cars from the 1930s until the 1950s. Interestingly, before Powell Crosley produced cars, he was the owner of the Cincinnati Reds. Their first car, what we would call a subcompact these days, was a convertible.
1939 Crosley Convertible
For the war effort Crosley supplied its power plant the four-cylinder CoBra. CoBra was short for Copper Brazed and often refered to as the “The Might Tin” it was used aboard PT boats and and the B-17 Flying Fortress bombers mainly to power generators, refrigeration compressors, etc., and were widely praised for their successes in the war effort. The engine was made from sheet metal rather than cast iron like most other engines.
CoBra Block – the thin walls reduced hot spots.
Crosley CoBra this one was set up for vehicle use
Crosley stayed in business after WWII and eventually closed up in 1952. Their last attempt to save the company was to production a utility vehicle called the Farm-O-Road which was used on farm and ranches.
I bumped in to Bill Holtzclaw from Cartersville, Georgia, virtually (Facebook) and he shared a few pics and some detail on his restoration of a 1967 Olds F-85.
Bill's F85
“I am doing a full, frame-off restoration on this 1967 F-85 Club Coupe. It has a convertible frame, 442 suspension, steel crank 330, .030 over with W-31 cam and 2” intake valves, close ratio Muncie 4 speed and heavy duty 3.91 posi rear. It is a radio delete, heater delete, carpet delete car with the factory cloth and vinyl interior. The drive train is built and the chassis is being assembled. The interior is done, the chrome and bright work is done. Next, we’ll pull the body and put it on a rotisserie. It will be two-tone Crystal and Midnight Blue.”
“I’ve had a lot of interest in this project from some of the leading Oldsmobile collectors in the country. It is my version of what would have been a 1967 W-31, which was introduced in 1968. All of the parts to build this car back in the day were available as either RPO options or over-the-counter upgrades. The W-30 package was available as an over-the-counter package in 1967. The W-30 cam and the W-31 cam are one in the same, and the OIA kit will work for both small block and big block cars. So, it was a possibility! ”
The upholstery turned out awesome! He used NOS fabric for the seat inserts. The car was a factory carpet delete car with a near-perfect vinyl floor covering. “I cleaned it and had it dyed the color blue (same as dash pad) that I wanted. It looks absolutely brand new! I had seat belts custom made to stock appearance, and the standard steering wheel came out nice, too.”
Check out the vinyl floor covering
“I had the gauges restored by R&M restorations in Greenville, SC. The odometer was re-set to zero.” The dash bezel was restored by Chrome Tech USA. They repaired the 44 year-old plastic, re-chromed it and then detail painted it. The radio and heater delete plates were purchased from Red Venom Enterprises. “They only make the radio plate, so I purchased two and trimmed one to fit the heater control panel and the PRNDL panel. ”
Bill did the polishing himself
He installed a Sunpro Mini Tach in place of the factory clock. Looks like it came from the factory that way!
Great Job - Bill!!
Final Product
Bill is also the owner of a 1967 Oldsmobile F-85 Town Sedan with “Police Apprehender” package. It has the HiPo 330/320 hp, Heavy Duty Jetaway and 442 suspension upgrades.
Nice!!!
Might be why he’s known as OldsMoBill. “I am also known as the “Oldsmobile Police”!” Bill states.
Bill, I hope you check back with your status from time to time and thank you for sharing.
At the entrance. Here are two of the cars that are up for raffling. There is also the a vette you can “try on”. In this clip I stated that the vettes at the end of the building were there for customer to sit. No true. That is where the code R is fulfilled. Code R is for delivery at the NCM. You can view a 1984 C4 in the window.
So I just can’t let the 283 go. I will find one, restore it and hang it from my garage ceiling, umm…yeah..I don’ t think the misses will have a problem with that….ok maybe just store it a corner of the garage..or turn it to a coffee table..yeah……um…no.
Check out his 1966 Corvair with 300 hp 283.
Link is here: http://www.automobilemag.com/reviews/driven/1012_1966_corvair_corsa/index.html
REVIEWS:
First Drive: 1966 Corvair Corsa
From the December, 2010 issue of Automobile Magazine
By Don Sherman
Photography by A. J. Mueller
The Chevy Corvair’s swing axles and heavy tail are implements of the devil, at least according to Ralph Nader’s Unsafe at Any Speed diatribe. Paul Siano, the creator of the mid-engine Siano Special, doesn’t buy any of that. He has owned, modified, and drag-raced Corvairs for more than half of his seventy years without suffering a single unintended spinout.
Siano bought — brand-new — what began life as a 1966 Corvair Corsa after supercharging a Volkswagen Beetle and owning a ’64 Corvair Monza Spyder convertible. He drove the coupe 50,000 miles before ripping out the stock 180-hp turbo engine.
A vintage Crown Manufacturing kit provided the means of upping the cylinder count and moving the engine from the back porch to the rear seat. That package included a tubular-steel subframe, an engine-to-transaxle adapter plate, a new transmission input gear, cooling-system pipes, a new shift linkage, and two new antiroll bars.
Siano’s prize possession is a rare, experimental, 283-cubic-inch aluminum engine block that General Motors pitched out as scrap. Engine builder Bryce Flinn added a roller cam, aluminum heads, and the induction overkill. Siano fabricated the necessary bits and brackets with an emphasis on minimal weight. He also added four-wheel disc brakes, Minilite wheels, radial tires, and a Ron Davis aluminum radiator.
Siano didn’t partition off his eight-pack of Weber intake trumpets, because he’s a patron of the rolling, reverberating, internal-combustion arts. Living with Webers is not for the meek of heart. When cold, they spit and stumble. When they’re up to operating temperature, they fill the interior with a combustible cloud of reversion gases. Smoking is discouraged.
Headphones are available for those rides when hearing preservation takes precedence over the din of a barely muffled Chevy V-8. Only two things keep the whirring water-pump pulley from biting the occupants’ elbows: the flush bolts that Siano installed in place of hex-head screws and every human’s natural preservation instincts
REVIEWS:
First Drive: 1966 Corvair Corsa
|
When we drove to the test track, Siano’s homebuilt special revealed evil streaks: quick but heavy steering, vague shift linkage, and a throttle pedal that offers yes and no but very little maybe. However, a few miles were enough to establish an amicable working relationship.
Offered the opportunity to redeem itself, the Siano Special settled into stride to post a reasonably impressive performance report: 0 to 60 mph in 5.2 seconds, the quarter mile in 13.9 seconds at 104 mph, and a top speed of 130 mph. More amazing, the handling balance is excellent, offering just under 0.90 g at the limit of adhesion and only a touch of easily controlled oversteer when the fourteen-inch BFGoodrich Radial T/As finally let go. The cobbled-together chassis held firm over bumps, and the dampers kept body motions nicely controlled throughout the testing gauntlet.
Back in the Corvair’s day, GM fiddled with various mid-engine sports cars, only one of which (the Pontiac Fiero) ever made it to a production line. Leave it to a motivated Corvair enthusiast to demonstrate what can be achieved by adding a couple of cylinders and relocating the engine to a more productive location.
The Specs Engine: 4.6-liter (283 cu in) OHV V-8, 300 hp (est.) Weight: 2600 lb Weight distribution f/r: 44.0/56.0% Drive: Rear-wheel
I still wonder what would have happened to Checker if Ed Cole had not died in a plane crash. Ed Cole was a GM Engineer who was ‘the father’ of the Chevy 283. The story goes that Checker was about to go out of business, and Ed Cole had accepted an offer to take the company over. Ed had retired ‘comfortably’ from GM, and wanted to have some fun with Checker. Legend has it that Ed planned to get the GM Impala/Roadmaster RWD chassis, drop in a a Mitusbishi V6 drivetrain from the Diamante, and keep the SAME Checker body panels. His goal was to keep the car in fleet sales with great MPG and long term reliability,
Knowing what I know today about Government regulation for automobiles, I have to think that Ed Cole would have prolonged Checker perhaps another few years, or so. Crash test alone cost about 1 million dollars per car model today.
