As I mentioned in an earlier post, I’m going to rebuild the old 3 speed transmission that I took out of my ’70 Mustang coup and I’ll do it in stages (average guy, average time to spend on a project…especially one that isn’t going to benefit my cars). The rebuild kit is on it’s way.
This the first time I’ve attempted this, so who knows how it’s going to go.
First I’m going to give myself a transmission anatomy lesson, which I’ll share here.
Since I’ve gotten the 4 speed ( T-10 from 1967 Shelby) in the Mustang, I’ve been driving it a lot more. I’m surprised at how much of an improvement it has made in the drive ability. Of course there is more power going to the ground which is remarkable and the RPMs are put to much better used. The original three speed top out pretty quickly and nothing left but engine noise.
Of course with more power hitting the ground, my current tires (wide and hard) tend to grip a lot less and spinning them through 2nd gear is common. That will required some new, softer tread before long.
After driving the Mustang a few days in a row, I took the Vette to work. Now you would expect there to be a difference, especially with the 120 hp disparagement in power the Vette (about 420) and the Stang (about 300 – maybe a bit less) , but what I notice is how both cars arrive at top speed.
Both car’s like to launch, but the Vette does so with much less rear hunching then the Mustang. The Vette feels lighter as it gets up to power – less down force on the road. The Mustang is much different. You can feel it, feeling the road. I can actually feel the power longer and deeper in the Mustang as it move on up through the RMPs and the gears.
I think I’m ready to at a tach to the Mustang, I need to see the RPMs it’s turning out and then I’m going to have it dyno’ed. It will be a good baseline before I get the 351 CJ head and intake installed.
Ok…I sorry (not really) but I have to consider what my readers like. And to date one of the most read articles on my blog is the piece I did on the Mustang II King Cobra http://wp.me/pKHNM-uY . (Go ahead you know are going to go read it!!)
So I’m going to do a series on the Mustang II (after all I’m project managing the restoration of a 1975 VW, I could spend sometime on that era Mustang). We’ll touch on the 4 and 6 cylinders and yes there was a 302.
So we’ll start with a history lesson.
1973 was the last year for the more powerful and larger bodies Mustangs. Ford may have thought they were going back to the original size Mustang and the 1974 version was in fact close to that size. The 1966 Mustang had a wheelbase of about 108 inches ( 181.6 inches in total) and the 1974 was 96.2 (175.0 inches over all). Compare to the 1973 which (depend on which version) was 187.5-190.0 inches over all.
The generation ran from 1974 to 1978 and sported some collectible cars, the King Cobra and Mach I…yes Mach I’s in a Mustang II.
For all you MOPAR fans out there this is a great article by Auto Enthusiast. I’m not going to repeat it all here. Grab the link at the bottom of this post.
Mopar is a commonly used word in today’s motorsports and high-performance car scenes, but the origins of the term Mopar had absolutely nothing to do with high horsepower or checkered flags.
Chrysler was a young and growing company in the 1920s. It had bought out the Dodge car company in 1928 and the need for a dedicated parts supplier led to the formation of the Chrysler Motor Parts Division.
As the company continued to grow, Motor Parts Division featured a simple logo with the letters C, D, D and P (Chrysler, Dodge, De Soto and Plymouth) from the years 1933 to 1937.
Nelson L. Farley, a sales promotion manager, decided there had to be a better way of promoting the replacement parts. An “Activities Council” was created. Company records show the results of the Activities Council came to light in the spring of 1937. The group came up with “MoPar,” (a simple contraction of the words MOtor and PARts). The first order of business was coming up with a logo to put the name on cans of antifreeze.
The first MoPar logo was oval and used yellow and red. The new logo and the new name were a big move forward in communicating to the customers. If you needed something for a Chrysler product and got it from the garage that sells the vehicles, it came marked as a MoPar item.
The original brand and trademark logo remained the same from 1937 to 1947. It was slightly changed in 1948. The second logo did not change for six years. MoPar parts were still factory replacement items, nothing more and nothing less.
Everybody knows that saying “I’ve died and gone to heaven”, and this applies to most enthusiasts in this junkyard full of old decrepit Ford Mustangs. Especially, the project guy that has an old classic sitting in the garage. I’m sure it could go either way, though, as some might consider this a sore sight with so many wrecked and rusted ponies. This is the Colorado Mustang Salvage Yard.
Soooo, anybody down for some campin’?!
Colorado Mustang Specialists, Inc. began in a two-car garage in 1972. Mustangs were as numerous as hippies on a Boulder park lawn, easy to buy, fix and sell. So, a would be University of Colorado student found a lucrative way to pay his rent and tuition. After graduation the diploma went in a drawer and the horsing around got serious. Wrecked, junked and abandoned Mustangs were cheap and plentiful, so the collection started that eventually led to the worlds largest Mustang salvage yard.
Most recent and exciting to us is the addition of modern fuel injection conversions, for 64-1/2 to 85 models. These conversions and related parts let the novice enthusiast bring his early Mustang into the new millennium with a computer driven, fuel-injected, V-8 power train, meeting todays standards without changing the Mustangs classic design. We predict these conversions will open a fun and exciting new era of Mustang enthusiasm.
We are going to start of with a well-meant attempt by Chrysler to meet the oil crises from 1973 to 1980. Introducing the Cricket!!!!
1973 Cricket
This car was actually a US spec’ed Hillman Avenger.
It featured the Avenger’s 1.6 liter pushrod engine. This car’s top speed was 84 mph and took a merely 19.8 seconds to get to 60 mph (I bet you were thinking 100 mph!!).
The car was horrible slow and because it was detuned for as part of the US requirements it ran poorly.
Many, many 1978 Indianapolis 500 pace car replica Corvettes were mothballed with hopes of the cars turning into super collectibles, so finding a low-mileage example today isn’t hard. In fact, there are seven for sale in the December issue of Hemmings Motor News. One, formerly on display at the Corvette museum in Bowling Green, has just 116 miles on the clock. Another is advertised as having been driven just 700 miles. If you want a car you could actually drive, there’s a 1978 Indy Corvette with 22,900 miles.
Unfortunately, the demand predicted for these cars back in the Disco Age has yet to arrive. If you like ‘Vettes, you wouldn’t kick a 1978 pace car out of your garage, but as Corvettes go, these are considered lackluster performers and too many were built for them to ever be considered rare.
According to the Corvette Black Book, the original plan was to make 300 of the black and silver ‘Vettes. Mike Yager’s Corvette Bible claims 2,500. Had Chevrolet stuck to either of those figures, Indy Pace ‘Vettes would probably be more collectible today. But for Chevrolet, the profits these cars were raking in must’ve been as irresistible as coke at Studio 54. The Indy cars received a lot of hype, so demand went through the roof and Chevrolet cranked out 6,502 copies – more than one for each dealer.
With a base price of $13,653 compared to the standard Corvette base price of $9,446, the Pace Cars were expensive and profitable because they were loaded with “mandatory options.” Power windows, power locks, removable roof panels, rear window defogger, air conditioning, tilt/telescoping column, AM-FM radio with 8-track (or CB radio at extra cost) – all were included. Even this probably doesn’t help the value of these cars as luxury tends to be the exact opposite of what Corvette collectors crave today: radio delete, heater delete, oversized fuel tanks (when they were available), manual transmissions. You get the drift – racing-related stuff on a Corvette is hot. Stuff that you would normally associate with a Caprice Classic is not.
Anyway, receiving almost as much press as these cars received when new is a barn-find pace car offered for sale by Hemmings advertiser Corvette Mike. The car has been all over the Internet due to the fact that it has only 13 miles on the odometer. It’s even covered in an authentic layer of scurvy storage grime.
The pace car’s bonafides include a CB radio, Gymkhana suspension and the 220hp L82 350, all of which are cool. The fact that it’s an automatic makes it a little less so. Check it out for yourself over at Corvette Mike’s.
I had previously added a can of Techron Fuel System Cleaner. This was the first treated tank. Today the Vette need filling up and I recorded the incident.
In the second video please excuse the legs shot.
This first is the status as I pulled in to gas up.
This is it. The beginning of it all. What were they making in 1901?
The top producer was the Locomobile car company with a total out put for the year 1,500 cars.
Winton was second with 700 cars.
Oldsmobile (ahh one we’ve heard of!!) was third with 425.
White came in fourth with 193.
Autocar was next with 140.
Knox was sixth with 100.
Rounding out the bottom was Packard and Stanley with 81 and 80 respectively.
This is a 1901 Winton Racer..what's the guy in the front doing?
1901 Autocar
The 1901 Autocar has a shaft-drive engine, powered with a water-cooled, two-cylinder, horizontal-opposed engine in the front of the car. The gasoline tank and battery box were under the front seat.
Chevy and it’s customer loved the Chevelle, the customers because of the low price and horse power, Chevy because of the sales. Now days a Chevelle is a highly sought after collector car. Finding a real good one is rare unless you want to play nearly a years salary.
Among those are clusters of the extremely rare. Within the production of the 1965 Chevelle there is an extremely rare version. That was the year Chevy took its brand new Mark IV 396 engine and hoisted it to the engine bay. It was the first of its kind (but not the last – the following year the 396 Chevelle became a regular model) with 375 hp and a 4 speed transmission. This was the special SS model of the Chevelle.
This was Code Z16 and only 201 1965’s were made with engine/transmission and trim, making this one of the rarest of the Chevelles SS.
