Unfortunately I have to start the year out with a legal notice. It seems that my writings are so inspiring(…ok…stop laughing!!!) that a few sites have decided that they would use them on their sites in total, placing ads in the middle for their profit and not requesting permission.
I enjoy writing my blog and I do it to share experiences and social interaction.
If you like it, great!!
If you’d like to share links, I’m all for it
If you want to post entire articles ask permission and I’ll send you my list of requirements for accomplishing this.
If you want to use my articles and place and in the articles, we need to talk first.
As we close out the year that was 2010, I celebrate the first year anniversary of Average Guy’s Car Restoration, Mods and Racing.
Over the past year, I’ve enjoyed jotting down my thoughts and experiences. Mostly, I’ve enjoyed hearing back from readers here on my Word Press main site and in other social media.
This past year I’ve seen the page views on this “one man” blog go from just a couple per week, to nearly 1500 a month. Not bad for a non-commercial blog, with no paid advertising. So THANK YOU. I hope to hear from and read your comments and views in 2011.
What’s coming up in 2011? Mods on the ’70 Mustang, tweaking of the LS2 on the 07 Corvette and I’ll continue with the Auto Factoids in their new format. You will see more mini engine series, kicking off the New Year one of my favorites Chevy’s 283 and there will be more racing events, test ‘n’ tunes and Mom and Pop racing teams highlighted. There will be more contests and DVDs to give away and project updates from readers. Oh…I’m coming out with the Average Guy’s 2011 Calendar look for that on-line.
It’s going to be a fun new year.
To you and yours – may 2011 bringing nothing but happiness and joy.
While I’m currently working on the project plan for all the modifications, I still get the urge to spend a beautiful winter’s day doing some wrenching. Oh…here in southern Arizona you wait for winter days like today, Sunny and near 70 degrees…oh yes..perfect day for being outside and working on your projects. ( Don’t hate me ’cause I’m warm!!!)
Modifications pending, there are still little things that can be done. A few weeks ago I noticed a loose fender bolt. Now normally these bolts are screwed in to clip/slide on nuts (some times called “short nuts” but I just couldn’t put that in the title) that are slid over the edge of one of pieces you need to hold together.
Slip-on or Short Nut
So if a bolt becomes loose it is often the cause of vibration, and if left unattended you can actually loose the slip-on nut. Unless…..it doesn’t have one and a traditional nut has been used.
A while back I ordered a couple of bags of bolts and short nuts for my Mustang and today I decided to spend a few minute and replace the loose one and check the others.
What I found was a bit odd. Three of the bolts on right fender (do I have to say right “front” fender? I hear that all the time, but I grew up knowing that fenders were in the front and quarter-panels were in the rear.) did not have the short nuts, but rather the tradition bolts. I checked the left “front” (just in case) fender and found them to all have slip-on nuts.
I can understand that some where in the 41 year life span (Oh…incidentally..I’m technically the 3rd owner, with the to previous owners beginning a mother, daughter combo) of my ’70 coupe that someone took it a part, lost the slip-on nuts and yes it was just a driver car so that’s possible. However, on closer inspection I noticed that the normal slots that would allow the assembler to slide the short nut on were not there for the three bolt holes at the front of the fender (or at the front of the front fender….ok sorry, enough of that).
Square Slot that allows for the installation (Left of the bolt)
Bolt Holes without the slot.
So I wondering how much after-market parts are actually on the my Mustang. When I had the car repainted, we did discover that the right door was replaced (paint underneath was blue) so why not the fender? The options I have are to, remove the entire fender and if the holes are not blocked by aftermarket fender then I’ll have to consider using the traditional bolt and nut or I’d have to cut the slots.
Now that’s not the only aftermarket issues I discovered. Those two bags of bolts and short nuts…..yeah..they aren’t the right size. Although the are sold as “fitting 1968-1970 Mustangs” the original are 1/2 ” nuts and these are 7/16″. Well yeah..they’ll fit…heck there are all kinds down the street at ACE Hardware that will fit too!!!
As part of the mods and upgrades for my 70 Mustang, I plan on replacing all the carpet. Before I do that however, I’m going to lay down some heat and sound proofing (but that is another post).
As I start project planning, I’m looking around for parts and materials, as well as any helpful hints. (If you have any at any time, drop me a comment.) Although certain portions of the restro-mod will have to be done together, like carb and intake or heads and cam (yes I’m all four will be done at the same time), many can be accomplished separately, like adding the heat/sound proofing and the carpeting, before upholstery of the seats. In the Mustang getting the seats out are easy enough (keep in mind my goal is to not have the car tied up too long between stages) so replacing the seats after the carpet installation, isn’t a problem.
As a reminder, the mods will be done in adherence to budget, time and events. So there maybe a need to move between different phases to accommodate either 3 of those factors.
O.K., so where was I, oh yeah..carpet shopping.
As I looking on-line for the best place for ordering carpeting, began to notice a lot of choices. I start thinking “I’m going to have call up on deck my personal award-winning interior designer (that would be my wife – by profession…no not wife by profession although I’m sure thinks it’s her 3rd career, but Interior Designer by profession). Here is a little bit of what I found:
Plush Cut Pile
Ultra-Plush Cut Pile
Neon Cut Pile
100% Nylon Loop
I’m thinking, “holy cow!!!…What the heck is this?!! Ultra-Plush Cut Pile? I’m not building a ’60 Love Van!!! Oh it gets better..yeah.. you guessed it samples!!!!!
Misty Gray
BuckSkin
My favorite - Cinnabar
Oh..come on!!! Cinnabar!!!! Really!!?? Um..yup. Oh and there were many more, like Medium Gray and Silver Mist and Nutmeg and Fire Thorn!!!! I’m not kidding.
So I’m looking round to make sure know one’s looking over my shoulder (as I’m doing this over my lunch at work..on my personal smart phone…just in case “they” are reading!!!) All the time I thinking…”It’s black..all I know is that it’s black!”
Who knew that there was that much to look at? Not this Average Guy.
Luckily I found this snippet on one site and it all became clear:
Plush Cut Pile
Our nylon cut pile is constructed from 100% first quality yarn and is similar to what is found in most cars since 1974. It is tufted on a 1/8 gauge machine with 14 ounces of yarn per square yard. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.
Ultra-Plush Cut Pile
This carpet is a super plush upgrade to our standard Cut Pile. A 100% nylon cut pile manufactured with over 40% more nylon fiber than our standard cut pile. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.
Ok..still not sure here!!!
Neon Cut Pile
Our Neon Cut Pile colors are a great look if you want to make a statement! Although these are not stock colors, they would be appropriate for all applications. There is an additional 15% charge for all applications made with Neon Cut Pile.
What…not stock colors!!!??!!! What? Are you sure that is color
wasn’t stock? It’s Pink!!!!
And the clouds parted and it all became clear. The very last one was this:
100% Nylon Loop
A 100% nylon loop. This material is appropriate for pre-1975 applications only, and was the original type construction used in 1969-1973 Mustangs.
After much internal debate about what to do with my 70 Mustang I’ve decided on a direction for Mustang.
Running out of car projects (there was always something to ‘fix’ on the ’84 Vette). The 07 Vette is going to stay as if for a while, I like just it as it is for now. The Mustang is nearly done, with just a re-upholstery with the front seat, restoring the back of the rear seat and replacing the steering column cover and new carpeting. That’s all coming up soon. But there are a few more things that are going to happen. The time frame will be fluid given the availability of funds (Average Budget) and time.
I wrestled with keeping the car original in the beginning. But with the tired old 250 straight 6 wasn’t going to make it possible, coupled with my desire to have more horse power. I’ve often thought that the 302 swap wasn’t horrible and by keeping the 3 speed manual transmission, my changes didn’t reach the level of a resto-mod and I still think I’m good there. Keeping it period (swapping out items that were actually available for a coupe as options in 1970) I thought was noble in trying to bring it up to a level of performance I “could live with” without straying too far from its original configuration. However, I understand that a ’70 Coupe isn’t ever going to reach the value of any other ’70 model or configuration of Mustang nor will it receive a comparable level of the attention at car shows.
So I’m working out a plan for taking this under rated coup to an all new level.
Currently as configured the car has the following:
Today is the anniversary of the assembly line created by Henry Ford, did he?
Like saying night is day or Pink Floyd isn’t the greatest rock band of all time, saying Henry Ford didn’t invent the assembly line goes contrary to conventional auto wisdom. But he didn’t. It was actually Ransom E. Olds.
I love engines and the options for a 1970 Mustang – like mine, were many.
My Mustang's Enhanced 302
The sixes consisted of the 200 (120 hp) and the 250 (155hp) – mine started out as a 250
The eights consisted of 2 302 (2V and the 4V Boss), 2 351 (250 and 30o hp), 2- 428 (Cobra – 335 hp and Cobra Jet Ram-Air – 335 hp and the 429 Boss – 375 hp.
The transmission offered were – 3 speed manual Fully synchronized (currently the trans in my car), 4 speed manual sports-type w/Hurst Shifter and in the automatic the Select Shift Cruise-o-Matic Drive (more on that in another Auto Factoid.
Well, I don’t know about every car guy, but I do know what I like.
Some of my favorites are abandon car art, but I enjoy a lot of other subject matters as well.
If you look to the right of this post you’ll see one of my favorites. My old 1984 C4 red Corvette, closely following what would be my future car(unbeknownst to me at the time) a black C6 Corvette. I have one other favorite and that’s a rendering of the interior of my 1970 Mustang.
My 1970 Mustang
I’ve known this starving artist (he’s not really starving, my wife won’t allow that) his entire life. Ryan has a great eye for car art. (Shameless plug. This image and the image of the Corvettes, nicely framed, make great gifts, tis the season.)
While tooling a round a little town in Southern Arizona this past Black Friday (Nov 26), I happened to meet an artist named Scott Taft and had to purchase a picture of 1959 Chevy that he had transferred to metal. You can see his work at http://www.fanartreview.com/sctaft.
One other web site I ran across was this one, it’s got a little more bling, but some very nicely done pieces. It’s called Car Art Work and you can see their offerings @ www.carartwork.biz.
Car Art Work
Just for the record I don’t receive any money, free stuff or benefit in any way (other than a big thank from my son if one of his images sell) for mentioning these artists or companies. This just stuff I like.
