ParkingLot Spotlight 6/07/2011

So you are out at the mall or grabbing some groceries at the store and you are headed back to your car in the parking lot and you catch something out of the corner of your eye.  It’s out of the ordinary, it really shouldn’t be there, especially parked between that 1998 Honda with almost no paint and the huge Cummings Diesel pick up with a bench car seat bungy corded to the tie downs in the bed, but there it is, glowing and out-of-place.

That is what these segments will be about.  Sometime there will be comments from the owner and sometimes I won’t have a chance to chat with them.  There is a fine line between loving cars and stalking. (Standing around while your milk getting warm and your ice cream is leaking out of the hole in the plastic bag, waiting for the owner is on the line.  Hey..it only happened once!!!…Come on now!!!..You’ve done it!!!)

Wandering around Southern Arizona wine country, we pulled into the one of the winery’s parking lots and I spied this beauty.

1964 Lincoln Continental Love the shape of the grill.

Yes! Convertible with suicide doors.

I’m on the fence with these wheels, but it’s still great looking.

Some 1964 Lincoln Continental facts:

Sales for that year was  32,969 roughly and approximately only 3,328 convertibles were sold.  The other option was a 4 door sedan (no two door coupe?  I’ll have to check on that).  The vert was sold for $6,938 and the sedan was about $700 less.

Only one engine was available for the Lincoln and that was the 430 with 320 hp. Which was good because the car weighted 5,000 lbs.  It was paired up with a 3 speed auto transmission which helped it reach the top speed of 110 m/h.

Longer wheel base was about 2 inches longer then the previous years at 126 inches.

 

Thanks for reading.

Tim

Wrenchin’ Tips – Masking

Having grown up working in my Dad’s body shops, was often given the honorable task of taping (masking) off the areas that weren’t going to get sprayed and areas, like windows and mirrors where you don’t want over-spray landing.   I learned a few tricks that help speed up the process, but more importantly help ensure a good clean paint job.  Removing over-spray is not a fun process.

I’ve tried the machines that merge the paper and the tape, great for straight lines, like the Coca Cola trucks we painted but for tight corners it just doesn’t work.

To save time, which equals a money saver and to get sharp clean lines, outline the areas with thinner tape, 1/4 inch works best.  After that use the tape and paper machine and run that along the previously laid tape.

Here’s one more.

I can’t possibly tell you how much a pain it can be to tape off emblems and name plates and it’s never clean.  Do yourself a big favor, figure out how they are attached to the sheet metal and purchase replacement them.  You know where I’m going… remove the badges and emblems.  That is the only way to do it right.

Clips for my 70 Mustang badges

Thanks for reading.

Tim

NMC Main Gallery II

This is brief run down of the car’s in the main gallery.

[vodpod id=Video.9451574&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FMainGM-7.mp4]

Main Gallery II, posted with vodpod

NCM – Swap out in Main Gallery

This is a great show of the main gallery.  In this clip they have just placed the AJ Foyt #8 Corvette on display and are setting up a C6 Grand Sport next to it.

Thanks for reading.

[vodpod id=Video.9084959&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FM-6.mp4]

NCM – 1962 Corvette Display

One of the  beautiful Vette displays at the Corvette museum.

[vodpod id=Video.9084088&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FM-4.mp4]

Chevy’s 283 – OH WOW – 300 HP in a What?

 So I just can’t let the 283 go.  I will find one,  restore it and hang it from my garage ceiling, umm…yeah..I don’ t think the misses will have a problem with that….ok maybe just store it a corner of the garage..or turn it to a coffee table..yeah……um…no.
Check out his 1966 Corvair with 300 hp 283.
Link is here:  http://www.automobilemag.com/reviews/driven/1012_1966_corvair_corsa/index.html
1966 Corvair Corsa Front Three Quarters In Motion

REVIEWS:

First Drive: 1966 Corvair Corsa

From the December, 2010 issue of Automobile Magazine
By Don Sherman
Photography by A. J. Mueller

The Chevy Corvair’s swing axles and heavy tail are implements of the devil, at least according to Ralph Nader’s Unsafe at Any Speed diatribe. Paul Siano, the creator of the mid-engine Siano Special, doesn’t buy any of that. He has owned, modified, and drag-raced Corvairs for more than half of his seventy years without suffering a single unintended spinout.

Siano bought — brand-new — what began life as a 1966 Corvair Corsa after supercharging a Volkswagen Beetle and owning a ’64 Corvair Monza Spyder convertible. He drove the coupe 50,000 miles before ripping out the stock 180-hp turbo engine.

A vintage Crown Manufacturing kit provided the means of upping the cylinder count and moving the engine from the back porch to the rear seat. That package included a tubular-steel subframe, an engine-to-transaxle adapter plate, a new transmission input gear, cooling-system pipes, a new shift linkage, and two new antiroll bars.

Siano’s prize possession is a rare, experimental, 283-cubic-inch aluminum engine block that General Motors pitched out as scrap. Engine builder Bryce Flinn added a roller cam, aluminum heads, and the induction overkill. Siano fabricated the necessary bits and brackets with an emphasis on minimal weight. He also added four-wheel disc brakes, Minilite wheels, radial tires, and a Ron Davis aluminum radiator.

Siano didn’t partition off his eight-pack of Weber intake trumpets, because he’s a patron of the rolling, reverberating, internal-combustion arts. Living with Webers is not for the meek of heart. When cold, they spit and stumble. When they’re up to operating temperature, they fill the interior with a combustible cloud of reversion gases. Smoking is discouraged.

Headphones are available for those rides when hearing preservation takes precedence over the din of a barely muffled Chevy V-8. Only two things keep the whirring water-pump pulley from biting the occupants’ elbows: the flush bolts that Siano installed in place of hex-head screws and every human’s natural preservation instincts

1966 Corvair Corsa Cylinders

REVIEWS:

First Drive: 1966 Corvair Corsa

|
More Photos
1966 Corvair Corsa Front Three Quarters In Motion
1966 Corvair Corsa Engine

When we drove to the test track, Siano’s homebuilt special revealed evil streaks: quick but heavy steering, vague shift linkage, and a throttle pedal that offers yes and no but very little maybe. However, a few miles were enough to establish an amicable working relationship.

Offered the opportunity to redeem itself, the Siano Special settled into stride to post a reasonably impressive performance report: 0 to 60 mph in 5.2 seconds, the quarter mile in 13.9 seconds at 104 mph, and a top speed of 130 mph. More amazing, the handling balance is excellent, offering just under 0.90 g at the limit of adhesion and only a touch of easily controlled oversteer when the fourteen-inch BFGoodrich Radial T/As finally let go. The cobbled-together chassis held firm over bumps, and the dampers kept body motions nicely controlled throughout the testing gauntlet.

Back in the Corvair’s day, GM fiddled with various mid-engine sports cars, only one of which (the Pontiac Fiero) ever made it to a production line. Leave it to a motivated Corvair enthusiast to demonstrate what can be achieved by adding a couple of cylinders and relocating the engine to a more productive location.

The Specs
Engine: 4.6-liter (283 cu in) OHV V-8, 300 hp (est.)
Weight: 2600 lb
Weight distribution f/r: 44.0/56.0%
Drive: Rear-wheel

What’s Going On? How about an update?

That’s an email from a reader.  Been under the weather for a few days and a heavy workload this time of the year where I “pound salt” (hopefully a fair ratio of people get that).

So here is what is coming up:

Finish up the series on the 326 Pontiac engine.

Finish up the last couple entries for the Name That Car Contest (tally for this latest round coming up).

Feature Car – one of the Studebaker’s models.

Update on my 1970 Mustang “make-over”.

And some other stuff.

Thanks for reading.

Tim

BOSS 302: Scary Test Result as Brakes Fail

Don Royby Don Roy on April 26, 2011

It is easy to envy the job of a road test editor for a magazine or web site. After all, when it comes to the world of automotive enthusiasts, you’re pretty much living the dream. Often flown at other’s expense to exotic locations, you’re wined and dined in expensive establishments and given the latest high performance hardware to thrash around in. Other times, you just get really neat stuff to park in your driveway and make your neighbors jealous.

Generally, the only rule is ‘bring it back in one piece’ and given today’s anti-lock braking, electronic stability control, hugely capable tires and other modern developments, it’s pretty hard to break that rule. So, imagine that you are on a quarter-mile track, running some brake tests for which you run up to 70 mph and stand on the brake pedal and mostly let the electronics keep the shiny side up. Say you’ve done this dozens of times on all manner of performance cars, but this time the pedal goes right to the floor just as a metallic ‘snap’ registers in your brain.

Perhaps it is not always such an enviable position to be in because that is just what happened recently to Motor Trend editor, Scott Mortara, while evaluating a Boss 302 Mustang. Fortunately, the experienced tester was able to slow the car by downshifting the manual transmission and get off the track without serious incident. What followed from there, as reported by MT senior editor Angus McKenzie, is both a PR nightmare and a curiously unsatisfying conclusion for all.

An immediate and thorough investigation by Ford, which also involved stopping production temporarily at the Flat Rock, MI, assembly plant, revealed no inherent problem with production cars. The test car, however, appeared to have its brake pedal incorrectly assembled, so that a pivot pin sheared under the extreme load and master cylinder actuation was lost.

No conclusive evidence has been identified as to how this car’s brake pedal got to the state it was in, but once you let these cars out into the hands of others, anything is possible. This is the type of thing that Ford will continue to pursue internally until there is nothing left to investigate. In the meantime, this set of freaky circumstances serves well to remind all of us that bantha poo-doo happens and paying continual attention while driving is highly justified.

Checker Cab Note from a Reader

Thanks Bill.

This web site claims you CANNOT tell Checker years 1960 to 1982 apart:

http://jalopnik.com/#!266317/checker-marathon

I still wonder what would have happened to Checker if Ed Cole had not died in a plane crash. Ed Cole was a GM Engineer who was ‘the father’ of the Chevy 283. The story goes that Checker was about to go out of business, and Ed Cole had accepted an offer to take the company over. Ed had retired ‘comfortably’ from GM, and wanted to have some fun with Checker. Legend has it that Ed planned to get the GM Impala/Roadmaster RWD chassis, drop in a a Mitusbishi V6 drivetrain from the Diamante, and keep the SAME Checker body panels. His goal was to keep the car in fleet sales with great MPG and long term reliability,

Knowing what I know today about Government regulation for automobiles, I have to think that Ed Cole would have prolonged Checker perhaps another few years, or so. Crash test alone cost about 1 million dollars per car model today.

My THREE cents for the day!

Happy Easter, Bill

Name That Car – 2A

Here this one is going to be a tough one.

Jump in the ‘way back’ machine and guess this early turn of the 20th Century car.

Name That Car

Good luck.

Remember you need 5 correct answers to win.  If you are reading this on Facebook you need to chase the link and post on the blog.

Thanks for playing.

Tim