Tag Archives: dodge

The New Vette & Missing the Crossfire

By | | , , , , , , , , , , , , , , , , , , , , , , ,
6 Comments

Before you judge me…LOOK!!!!!

2007 Corvette

Wait…LOOK AGAIN!!!!

Side view

Another View

And one more…..

The LS2

Yes the 1984 C4 Crossfire has a new home.

But  in its place is the 400 hp LS2 powered 2007 Corvette.

She has a 6 speed manual trans mission, Z51 suspension, leather and power everything, key-less entry and starting and a host of other cool stuff.  I’ll go into more detail in the next post.

I thought I’d miss the ’84 more then I do, it will be going to a good home and hopefully will stay a Crossfire.  The ’84 goes with twice as many miles on it then when I bought it, lots of new, original parts and some improved and a really awesome stereo, it’s a better car then when I got. It deserves to be a show car and not a daily driver/grocery getter/race car (drags and auto cross)/show car.  But it did them all very well, with the trophies to prove it.  It was a lot of fun and I learned a lot about that middle ground technology that was a huge advance from the older cars, a first of its kind in many ways and a stepping stone to technology that is in the replacement Vette.

I’ve heard from a lot of guys (pssstt…when I use the word “guys”  I mean all genders….just wanted to be clear ) that really miss driving their older Vettes, there’s really nothing that can capture the rawness of that kind of driving.  I’m bit luckier then those guys because I can still jump in to my ’70  Mustang (thanks to a very understanding better half) and get that feeling of old school nothing but metal and tires driving.  I think that alone makes it easier to let the ’84 go.

Thanks to the guys up at Dynamic Crossfire Solutions in Chandler, Az (http://www.crossfireinjection.net/) and all the guys in my Corvette club – Arizona Corvette Enthusiasts (ACE) http://arizonavette.net/, they helped a ton with my learning curve…HEY  GUESS WHAT GUYS….I’m going to have a bunch of new ‘stuff’ to learn.

So get ready loyal readers, (all three of you!!!!).  I’m going to take my average skills, average tools, and now below average budget and take on new technology.

But where to start????!!!!????

I’ll be back to you on that.

Thanks for reading.

Tim

Corvette Consternation Part 2 Electrical

By | | , , , , , , , , , , , , , , , , , , , , , ,
2 Comments

So I bring the Vette home and the steering feels pretty good and although my 70 Mustang has power steering (I had been driving that all week..yeah..I know..”poor baby!!!”) there really is no comparison between the two.  I get home and park it for the night.

Next morning I’m up early going to wash both cars, so jump behind the wheel of the Vette to pull it forward a bit and…..nothing!!!   No power, nor lights, no key in the ignition buzzer, nothing.  Hey, there wasn’t even a clicking noise when turning the key.   I’m think great..what could I have left on that would kill the battery that badly.  Answer was nothing.

Now if you’ve some of my earlier entires, you’ll recall that electricity and I mix like, um….like..um…Amps and water!!!!   As long as it stays in the wire and gets from switch to device and nowhere else, I’m good.  Have that perfect universe interrupted and I’m not hanging with that.  I hate electrical work.  I hate thinking about, hearing about it and living through it.  And this isn’t limited to car, but that’s my topic here.

So I get out and raise the hood, but for I get to far I see a huge spot of fluid laying under the car.  Right about now I’m starting to get that…”all old cars should be crushed” thought running through my head and then..”I’m gonna find the guy that did that work, right now, on a Sunday and drag his happy but out of church (if such a demon would be allowed in one) and rub his noise in my…yeah…you guessed it….power steering fluid!!!    (Breath…breath..that was two weeks ago….come one now..simmer dow…………..HEY IT STILL FEELS LIKE YESTERDAY!!!!   Ok….ok…better now, it’s over and it turned out….OH>>>WHOA….don’t tell them now they won’t read the next two posts and your rating will drop below 2 reads a day!!!…Yes…Yes must get a grip!!!!)

So I started up the Mustang (they sit side by side together in the driveway nose to butt – have to back the Vette in or it won’t clear the end of the driveway) and maneuvered it over to the Vette so I can jump it with jumper cables.  I have a fairly new jump box but it never really seemed to work, and then I lost the power adapter ( stupid electricity) and it just sits in my garage.  I hook the cars together with jumper cables and allow the Mustang to run on high idle.  Get in the Vette and …nothing… not even single dash light.  The charging when on for some time before I could get the Vette to turnover and she started up, but she wasn’t happy.  I took the cables off and then for some unexplained reason I turn the vette off.

Crap!!!  So I turned the key, but I already knew how that would because there was still no key in the ignition buzzer..nope….and no click of the starter solinoid…and that would be a triple “Crap”!!!!  It took just as long to get her started again only this time I wasn’t going to turn it off.  I drove it over to the guys that put in the rack and pinion steering (of course it’s Sunday and I call and let some one know I was leaving it and to put it inside.  At this point I wasn’t happy, the power steering leak on a new system and now an electrical issue!!!!

Next day was a Monday and I called up  my friend Tim and said, “Hey..uncool to find fluid leaking and my electrical system is  f ‘ ed (short for fried….yeah right).

In the end it was just a hose that didn’t get tightened, oh and my alternator was in fact f ‘ed (short for fried).  The alternator came that afternoon and the car was ready the next day.  And that is that…end of ……………..yeah…nope…..I wish!!!!!

If you can guess what’s next, I’ll send you a DVD.

OH..here is the new rack and pinion all clean and nice looking!!!

New Rack and Pinion This was taken today 8/31/2010

Thanks for reading and yes Steve Sears..you have to wait  for tomorrow for the rest.

MOPAR’s 318 Part III

By | | , , , , , ,
2 Comments
You may only have ever heard the name Imperial with the name Chrysler in front of it, but there was a brief period when it was its own company…sort of.  In 1955 Chrysler spun off the Imperial as its own separate marquis in an attempt to compete directly with the Cadillac and Lincoln luxury marquees offered by General Motors and Ford.  It was to be a luxury branding.

Beautiful ’55 Imperial (not a Chrysler…well not one on paper)

Imperial continued as its “own” company until 1975. Even though it was always sold in Chryslers dealerships, it was, on paper, a separate its own company. From 1976 to 1978 no Imperials were made, at least by name the Chrysler New Yorker Brougham was the name plate used at the time.

However, in 1981-1982 Chrysler was looking for a luxury model to add to its line up and decided it would try it again. The new luxury car would be named the “Imperial”.  This was in fact a K car but let’s not dwell on that.  What was really important was the latest Aerospace technology that was being used under the hood for the first time in a car.

1983 K Car Chrysler Imperial EFI

 

The Imperial was the first car fully fitted with a continuous-flow injection system.  Oh and the workhorse engine they choose to make this historical leap…yup the one, the only 5.2L, V8….318, thereby, making this a historic event in the auto industry and for the 318.  This new fuel delivery system was monitored by a combustion computer and adjusted the fuel/air mixture to the driving conditions.  The idea was to improve gas mileage.  The 318 was able to produce 140 hp and 240 ft lbs asphalt gripe and go from 0 to 50 mph under 10 seconds.

EFI Set Up from a 1982 318

Unfortunately the design was flawed.  There were issues with the fuel, octane content and vacuum connections (not unlike issue with GM’s Crossfire engine used in the 82 GM models and including my 1984 Corvette).  It was so unfriendly that customers began trading the Imperials in 1981. It reached a tipping point and Chrysler recalled the 318s and most were fitted with a two barrel carb instead.  It is difficult to tell but according to some sources the 318 Imperial may have been fitted with 2v or 4v carb, producing 130 and 165 horsepower, respectively, in 1982 and 1983.

Either way the 318 had been the center piece for a leap forward in design…ok…ok…there was a leap and then a fall and then a backwards somersault.  Nonetheless it was historical.

Thanks for reading.  Next up with the how Dodge used the 318

Tim

Dodge Super Bee

The Super Bee was only available with the V8 318 engine (270 horsepower (hp) and the buyer could choose from either a four-speed or …

Auto Factoids for 8/8/2010

By | | , , , , , , , , , , , , , , , , , , , , , ,
3 Comments

8/8/55 – test of first solar car.  William Cobb  created a prototype, but it was only a 15 inch model. Basically, an electric current was produced that in turn powered a tiny motor. The motor turned the vehicle’s driveshaft, which was connected to its rear axle by a pulley. I couldn’t find a pic of this one.  However, Alan Freeman developed the solar-powered car  in 1979 that you could actually put a human in.  Here’s the pic.  (It’s really just a bike…I think.)

Alan's Solar Car.

 

8/11/66  Chevy introduced the Camaro.  There is some discussion on whether there is such an animal as a 1966 Camaro, they  were, build in 1966 but sold in 1967.   Here a  pic.

8/15/56 Packard no longer producing cars in Detroit.  Previously the Packard company bought Studebaker and tried to keep the Packard name a live in 1957 by reworking a Studebaker and give it the Packard name.

1956Packard

 

1957 Packard...looks alot like Studebaker

8/21/1897  Oldsmobile becomes a company. Of course the company is no longer in business another icon gone.

1897 Olds

Thank’s for reading.

Tim

Auto Factoid 8/8/2010

By | | , , , , , , , , , , , , , , , , , , , , , , ,
1 Comment

This isn’t my normal “on this date back in…” factoid.  This one is current.

8/6/2010

At the VW Automóveis Ltda. plant in Portugal today the hundred-thousandth third-generation Scirocco rolled off the production line. Since its launch in 1974, this compact sports coupe has been the most successful Volkswagen two-door with more than 800,000 sold to date. Another notable Giugiaro coupe is the breathtaking beautiful Alfa Romeo Giulia Sprint.

These cars were a hot item in the use for a short while.

2010 Scirocco

 Thanks for reading

Tim

Auto Factoids for the weeks of 7/25/2010 and 8/1/2010

By | | , , , , , , , , , , , , , , , , , ,
1 Comment

7/26/1945 Kaiser-Frazer Corp organized – it also include what was left of Graham-Paige car manufacturer. Frazer Nash was a British car making company.  In 1953 it became just Kaiser Motors. 

1946 Kaiser Nast Sedan

 

1953 Kaiser Darrin Convertible

 

7/29/1916 Nash Motor Company as founded by Charles Nash when he purchased a company called Jeffery Company which made a car called the Rambler.  I bet you can guess what came eventually  American Motors and their Rambler. 

Oh..in 1909 Buick purchased Cadillac on the 29th day.  

8/3/1900 The Firestone rubber company was founded by Harvey Firestone.  It was based in Akron, Ohio and had only 12 employees. Six years later Mr. Henry Ford contracted with Firestone to supply tires for the Model T. 

8/7/1937 the Cord company stopped production car, but of course when one to build planes etc. 

 Thanks for reading 

Tim

The MOPAR’s 318 Part I

By | | , , , , , , , ,
Leave a comment

Before we start, I’d like the readers to know that these segments will not be an all-encompassing reference effort.  But I will have details that might not be well-known and some long forgotten.  Hopefully, it will be fun to read and informative.  The first few segments will be engines I’m familiar with.  I’ve owed a lot of cars and at least one of the Big 3 (Chevy, Ford, Chrysler) and all with different engines (and one with two).  First engine I am going to tackle is the 318.  I owned a Dodge Dart in the mid to last of 1970’s and it did have the 318 manual transmissions and at this very moment I can’t recall the other specs, but I’ll find them in this research. It that a great engine and simple to work on.

I’ve heard it mentioned that the 318 was Chryslers’ 350 (referring to GM’s 350, that’s been in existence for… just about forever…no it hasn’t but that’s another segment).  Of course the 318 didn’t have near the run that the 350 has, but it’s got some pretty interesting history of its own.

Let’s start with when the first 318 was used in a MOPAR car and what followed that up.  We’ll also look at some specs and some configurations it came in, you know carbs, cams and the like.

In the 1958 Plymouth the 230 c.i.d Powerflow Six was used as the standard engine, same as the previous year.  Chrysler did have V8s that were a possible option in 1957 and 1958, namely 301 and 277 cid.  However, it’s believed that the 318 was to replace the 277 c.i.d and the 301 V8s as the car maker moved toward try to capture a larger market.  The 318 had 9.25 to 1 compression ratio with 225 horses, it became the standard V8 used in the Plaza, Savoy, and Belvedere.  Perhaps the most powerful configuration you could get at the time was called the 318 Dual Fury (Sport Fury) V8 aka the Super-Pack rated at 290 horsepower; the dual was for the two  4 barrel carbs. The rest of the configuration included solid lifters, high performance cam, dual point distributor and dual exhausts.

The drive specs for the 1958 (which was a great looking car)

’58 Fury

 

shows that the standard block of for the Fury was the 318.  You could add the sport fury to it and go from 225 horses to displacing 350 cid and producing 305 hp, with 2 Carter, 4bbl carbs.  The nickname for the engine was the “Golden Commando” and it was paired up with TorqueFlite auto trans.

Oh, by the way 1958 Ply Fury was the star of the Stephen King book entitled “Christine” and later the  movie.

There is a lot of talk, even today about the Hemi, “Yo..dat got ah Hemi?”  It was a great design. But we won’t talk about the Hemi in this article, but we will mention the polyspheric cylinder head.  What is a ployspheric cylinder head?  That was a question asked by one of my frequent readers and this was my reply.

Poly is short for Polyspherical head. Some say it was a forerunner to the Hemi (Hemispherical head). Basically it was based on a theory that you could get more combustion or volume by angling the intake and exhaust valves then if you had them parallel. From Hemmings  Motor News book of Chrysler Performance Cars…”The ploy’s exhaust valve is located parallel to, but offset from, the cylinder axis.”

This increased the efficiency.  The hemi was constructed and designed to increase the efficiency with a more angled system. The shape that the valves make are semi-circular with the Poly being a little flatter than the Hemi.  I did the below image in Paint.

Poly-Hemi

 

This image is from Hot Rod and Hemis.com and shows the Hemi, Poly and the regular A series engine chambers.

www.hotrodandhemis.com Compare Hemi, Poly, Series A

 

Plymouth was not the top of the brand at Chrysler so back in 1956 it didn’t get a Hemi.  It did get was called the A series engine which came in 4 different displacement (277, 301, 303 and the 318).

To be continued.

Thanks for reading.

Tim

plymouth fury