So I left a couple of photos out of the last post. But I wanted to show (IMHO) a couple stars of the show and one of the strange one.
I covered the Galaxies and 500’s, however, here are a couple more: (Come..on..you would be able to pick just one or two either!!!)
(In no particular order)
Crown Victorian (before the exploding gas tanks and cop lights)
Oh..the Chrome!!
Did I mention the Chrome?
Just look at that smile..I mean bumper!!!
Not really comparable to the Crown Vic – this Starliner was, although not original, very nicely done.
Ford Starliner with a little custom work.
Oh..check out the intake setup on that Starliner!!!!
OK.. I know at least one of my readers will like this next car.
It is a 1965 Ford Mustang Station Wagon. Originally a concept created by William Sibo (designer for Ford Motor Company). He actually built this car from the original drawings. Car is currently owned by Ken Berger. The car now has a 429, rack and pinion steering C-6 auto trans, coil over suspension and power brakes, A/C and stereo system.
No Middle Road - Hate it or Love it.
There you go!
I can’t get past the that rear end….but this helps:
Let me start of by saying, WOW!!! Of course that’s what I say every year I attend.
There is a lot of things to do (oh, not just car stuff but one of my better-half’s favorite — shopping — everything from jewelry to purses to beds) , people to talk to and cars, cars and cars. Car people are at their best when they are around their cars.
This year was a bit different for me, yes, I sat a watched the auction a bit, I really wanted to talk to some of the vendors (I have a project to work on) and wander around the various staging areas.
Some of my favorite vendors were the Karl Kustom Corvettes. These are re-bodied C6/Z06 underpinnings/platforms and put some of the most popular Corvette bodies the ’63 split window coupe and the 67 Roadster. These are outstanding looking cars and if they perform like the Z06 and I understand the auction price. Oh and it is not just the bodies, they’ll take your old LS3 and knock it up to 599hp and your lame LS7 to 650hp…I’m just saying!!! Check them out at: http://www.karlkustomcorvettes.com/
Normally they have some sort of racing event or car demo, last time I attended -2009 they had 4 wheel drive area to the lasted models of Jeep and Hummer, and drifting demo. This year if you registered with Ford and Chevy (they walk you up to a computer and you punch your information) you were allowed to drive two of their latest models offerings. Since I’ve driving the Mustang and the Corvette before, I opted to drive the SHO Ford Taurus and the 2011 Camaro convertible.
2011 Ford Taurus...Oh..don't laugh..this ain't your daddy's Taurus
2011 Camaro Convertible
Let me say this about the Taurus SHO …Surprising!!!! It doesn’t look like much…but get behind the wheel and you’ll feel the kick. I managed to get the rear end to slide around (much to the Ford reps surprise) on the short track they had set up. That car says “sleeper” all over it, but you’ll shock the guy next to you taking off from that red light on your way to work. (Come..ON!!! You know you do that red light mini drag thing…yeah..ya do!!!)
The Camaro was awesome as well. I pick up one if I had room to park it.
Additionally they had the Bondurant guys there and they’d give you a spinning the their Z06 as well as a racing school out of Utah, that made it known to me that they were a “real” racing school and used real race set Mustangs unlike the Bondurant’s “street’ cars. They had a couple of cars there’s as well.
Here’s a few more pics and I’ll finish up a bit later.
Bagged Restro Mustang
Entry on to the Stage. A beautiful DeSoto on it's way to the block.
Oh yes, believe it or not, the 283 put the Corvette at the cutting edge of performance in 1957, fitted with the RamJet FI (fuel injection) system (“fuelie” was the gearhead term for that). In 1958 the 283 was the base engine for the Corvette, but the 283 that use to put on 283 hp was tuned to create an even 290 hp. If that wasn’t enough for you (of course it wasn’t enough, two words that should never be heard together ‘enough’ and ‘horsepower’…unless…the word ‘not’ precedes them). The RamJet FI was an available option RPO 579D.
Additional configurations were dual four barrel carbs that produced 270 hp, they were either Rochester or Carter AFB. The cam was changed in 1958 to give 0.398 inches of lift, improvements made to get more oil to the lifters and the exhaust manifold was reworked, called the Ram Horn’s manifold. There was a change in how the 283 was mounted. Chevy used the 3 point system with a mount on each side and one at the rear of the engine at the transmission.
Intake manifold for the 283 Double Quad
Dual Quad set up on a 283
In 1961 the FI jumped the engines’ horsepower to 315. (Hey, the base corvette in 2007 was 400 hp.) The FI wasn’t the only improvement for the 283 in 1961. It was treated with a set of solid lifter, improved heads and hydraulic cam which helped the block rich 315 hp, easily. This would be as far as the 283 would go in horsepower – in production. 1961 was also the last time the dual four barrel carbs were available as an optional configuration.
By 1962 the 283 was replaces by an entirely new engine the 327 (that’s another mini series) as the premier Chevy small block. The 283 was dropped from the a power plant for the Corvette to a base engine for Chevy’s passenger and used from 1963 to 1964. Its horsepower dropped to 170 and 195 for two configurations. A small bright was a four barrel configuration for 1965-67 that produced 220 hp. (That was the configuration of my 1966 Impala convertible.)
Of note is the use of the 283 in Chevy’s light trucks with a two barrel configuration for most of the models in 1958 to 1962. It produced only 160 horsepower. For the 1963 to 1967 light truck models the hp was increased to 175.
As part of the mods and upgrades for my 70 Mustang, I plan on replacing all the carpet. Before I do that however, I’m going to lay down some heat and sound proofing (but that is another post).
As I start project planning, I’m looking around for parts and materials, as well as any helpful hints. (If you have any at any time, drop me a comment.) Although certain portions of the restro-mod will have to be done together, like carb and intake or heads and cam (yes I’m all four will be done at the same time), many can be accomplished separately, like adding the heat/sound proofing and the carpeting, before upholstery of the seats. In the Mustang getting the seats out are easy enough (keep in mind my goal is to not have the car tied up too long between stages) so replacing the seats after the carpet installation, isn’t a problem.
As a reminder, the mods will be done in adherence to budget, time and events. So there maybe a need to move between different phases to accommodate either 3 of those factors.
O.K., so where was I, oh yeah..carpet shopping.
As I looking on-line for the best place for ordering carpeting, began to notice a lot of choices. I start thinking “I’m going to have call up on deck my personal award-winning interior designer (that would be my wife – by profession…no not wife by profession although I’m sure thinks it’s her 3rd career, but Interior Designer by profession). Here is a little bit of what I found:
Plush Cut Pile
Ultra-Plush Cut Pile
Neon Cut Pile
100% Nylon Loop
I’m thinking, “holy cow!!!…What the heck is this?!! Ultra-Plush Cut Pile? I’m not building a ’60 Love Van!!! Oh it gets better..yeah.. you guessed it samples!!!!!
Misty Gray
BuckSkin
My favorite - Cinnabar
Oh..come on!!! Cinnabar!!!! Really!!?? Um..yup. Oh and there were many more, like Medium Gray and Silver Mist and Nutmeg and Fire Thorn!!!! I’m not kidding.
So I’m looking round to make sure know one’s looking over my shoulder (as I’m doing this over my lunch at work..on my personal smart phone…just in case “they” are reading!!!) All the time I thinking…”It’s black..all I know is that it’s black!”
Who knew that there was that much to look at? Not this Average Guy.
Luckily I found this snippet on one site and it all became clear:
Plush Cut Pile
Our nylon cut pile is constructed from 100% first quality yarn and is similar to what is found in most cars since 1974. It is tufted on a 1/8 gauge machine with 14 ounces of yarn per square yard. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.
Ultra-Plush Cut Pile
This carpet is a super plush upgrade to our standard Cut Pile. A 100% nylon cut pile manufactured with over 40% more nylon fiber than our standard cut pile. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.
Ok..still not sure here!!!
Neon Cut Pile
Our Neon Cut Pile colors are a great look if you want to make a statement! Although these are not stock colors, they would be appropriate for all applications. There is an additional 15% charge for all applications made with Neon Cut Pile.
What…not stock colors!!!??!!! What? Are you sure that is color
wasn’t stock? It’s Pink!!!!
And the clouds parted and it all became clear. The very last one was this:
100% Nylon Loop
A 100% nylon loop. This material is appropriate for pre-1975 applications only, and was the original type construction used in 1969-1973 Mustangs.
11/10/14 – The first Dodge is produced and on the same day 11 years later Ford built its first Tri-Motor airplane.
Not the plane:
1914 - 4 Door Dodge Touring
This is the plane:
Fords 1925 Tri-Plane
11/11/1940 – The first Jeep
1940 Jeeps
11/12/1908 – GM takes over Oldsmobile.
11/25/1844 – Mr. Benz was more in Karlsruhe, Germany (Been there, the wine is excellent, the beer is better and the food is OUTSTANDING!)
11/26/1966 -The DeTomaso Mangusta debuts
1966 DeTomaso Mangusta
11/27/1870 – Joe Mach’s birthday. Yeah…the guy that started MAC trucks. The company started when Joe and his brothers purchased a carriage and wagon company in Brooklyn, N.Y. The first vehicle they produced was a tour bus. (1900) Next up was rail cars and locomotives. At the time they used the name Manhattan. Somewhere between 1910 and 1911 the name changed to Mack at about that time the Mack brothers bought a truck company. Oh..in case you are wonder the Bulldog became their logo in 1922 and the name was changed to MACK Truck. When I was a very young, we called all tractor-trailer Mack Trucks.
1910 Mack Hook and Latter firetrucks
New Auto Factoid format.
The Ford Mustang sold 419,000 cars in the its first 12 months on the marked. That number trumped the 417,000 cars set by the 1960………………Ford Falcon!!!!
When I began the restoration of my ’70 Mustang I knew that I wanted to replace the 250 straight six, with 175k miles on it, soon. I had several option, buy a new engine, buying rebuild or buying used. I chose to buy a re-manufactured long block and add my own components.
The option of buying a used engine and rebuilding myself wasn’t an option (average guy, average space and average tools) but I would have enjoyed it.
If you are going to purchase a used engine, dragging out of a junk can save you even more. But you’ve got to check it out before getting it home.
Here are a few tips that you can follow help prevent getting something home that the only real use it can server is to fill a corner the garage.
Now you aren’t going to be able to tear the engine down right there and look over all the parts but you could do the following checks.
1. If the engine still has the spark plugs, pull them a look them over. If they appear to have oil on them you might be looking at ring or value job being necessary (you might want to do that anyway). Likewise if they have water on them you may be looking at a head gasket problems or worse.
Fouled plugs
2. Most likely you are going to be able to pull the heads but you can remove the value covers. Look at for large mounts of sludge build up. That indicates other issues as well.
Sludge Build up
3. If you can drop the oil pan, check the contents for water or coolant contamination. You can also inspect the oil pump. Issues there indicate that there may be damage to pistons and crankshaft.
Oil Pan Gunk
Currently I’m looking for a used manual 4 speed for my ’70 Mustang. Now I don’t have any tips for that yet but I’ll let you know.
As with every car show there are some very good paint jobs. There are the cars that have a traditionally paint with flawless surfaces and deep ” you could shave in them” in them shine.
Then there are unique paint schemes, ghost flames or custom air brushed images.
Here are a few from a recent car show I attended.
Check out this custom Ford pick up.
Two Tone Black and Yellow...that's not all
Check out the bed!!!!
That is some great air brushing!!!
Check out this VW Bus.
Front view
Side View
And for really interesting paint jobs. Stop by the Bike section of the show.
Ghost Rider Bike
Even if you don’t like the paint you’ve got to appreciated the effort that goes into the work. Nothing but pure art.
Got a kool paint job on your ride? Drop me a pick.
