Auto Factoid 2011-2 Chevy Engines

1965 – 1966  Chevy’s mainstay V8 the 283 was used in several Studebaker models build in Canada.

 

1966 Studebaker Cruiser

1966 Studebaker with Chevy’s 283

Chris-Craft boat manufacturer used the 283 in their water boats.

 

 

Marine 283 for Chris Craft Cavalier Cruiser

Chris-Craft Used Chevy’s 283

Thanks for reading.

Tim

Happy Anniversary, New Year and Thank You.

As we close out the year that was 2010, I celebrate the first year anniversary of Average Guy’s Car Restoration, Mods and Racing.

Over the past year, I’ve enjoyed jotting down my thoughts and experiences.  Mostly, I’ve enjoyed hearing back from readers here on my Word Press main site and in other social media.

This past year I’ve seen the page views on this “one man” blog go from just a couple per week, to nearly 1500 a month.  Not bad for a non-commercial blog, with no paid advertising.  So THANK YOU.   I hope to hear from and read your comments and views in 2011.

What’s coming up in 2011?  Mods on the ’70 Mustang, tweaking of the LS2 on the 07 Corvette and I’ll continue with the Auto Factoids in their new format.  You will see more mini engine series,  kicking off the New Year one of my favorites Chevy’s 283  and there will be more racing events, test ‘n’ tunes and Mom and Pop racing teams highlighted.  There will be more contests and DVDs to give away and  project updates from readers. Oh…I’m coming out with the Average Guy’s 2011 Calendar look for that on-line.

It’s going to be a fun new year.

To you and yours – may 2011 bringing nothing but happiness and joy.

Happy New Year.

Thanks for reading.

Tim

Auto Factoid for the 2010

Well  Christmas is but a couple of days away and the 2011 is knocking on the door.

Here is the last of the Auto Factoids for 2010.

Enjoy.  Merry Christmas or what every holiday you celebrate and a very prosperous new year.

12/18/1970 – Lee Iacocca becomes President of Ford.

25 years before that on 12/21/1945 – Henry Ford II was named President of Ford

12/20/1868 Mr. Firestone was born in Ohio (Tires)

12/22/1900 The first Mercedes is built by Daimler

Perhaps my Favorite – on Christmas in 1878 Louis Chevrolet was born.

One of my least favorite Ford products showed up the day after Christmas in 1985.  Ford debuted the Taurus and Sable (a Mercury)

Oh..nothing says “buy me” like the Taurus and Sable…look!!!!

1985 Sable or Taurus?

1985 Taurus or Sable..can you tell them apart?? Do you care?

And to finish off the year Charlie Goodyear was born in Connecticut 12/29/1800  (yeah..people blimp guy!!!  and some of the best racing tires available)

Thank you for ready and drop me a note with what’s up with your 2011 car resolutions!!!

Tim

Mustang Carpeting – Who knew!!??!

As part of the mods and upgrades for my 70 Mustang,  I plan on replacing all the carpet.  Before I do that however, I’m going to lay down some heat and sound proofing (but that is another post).

As I start project planning, I’m  looking around for parts and materials, as well as any helpful hints. (If you have any at any time, drop me a comment.)  Although certain portions of the restro-mod will have to be done together, like carb and intake or heads and cam (yes I’m all four will be done at the same time), many can be accomplished separately, like adding the  heat/sound proofing and the carpeting, before upholstery of the seats.  In the Mustang getting the seats out are easy enough (keep in mind my goal is to not have the car tied up too long between stages) so replacing the seats after the carpet installation, isn’t a problem.

As a reminder, the mods will be done in adherence to budget, time and events. So there maybe a need to move between different phases to accommodate either 3 of those factors.

O.K., so where was I, oh yeah..carpet shopping.

As I looking on-line for the best place for ordering carpeting, began to notice a lot of choices.  I start thinking “I’m going to have call up on deck my personal award-winning interior designer (that would be my wife – by profession…no not wife by profession although I’m sure thinks it’s her 3rd career, but Interior Designer by profession).   Here is a little bit of what I found:

Plush Cut Pile

Ultra-Plush Cut Pile

Neon Cut Pile

100% Nylon Loop

I’m thinking, “holy cow!!!…What the heck is this?!!  Ultra-Plush Cut Pile?  I’m not building a ’60 Love Van!!!  Oh it gets better..yeah.. you guessed it samples!!!!!

 

Misty Gray

BuckSkin

My favorite - Cinnabar

 

Oh..come on!!!  Cinnabar!!!!  Really!!??  Um..yup.  Oh and there were many more, like Medium Gray and Silver Mist and Nutmeg and Fire Thorn!!!! I’m not kidding.

So I’m looking round to make sure know one’s looking over my shoulder (as I’m doing this over my lunch at work..on my personal smart phone…just in case “they” are reading!!!)  All the time I thinking…”It’s black..all I know is that it’s black!”

Who knew that there was that much to look at?  Not this Average Guy.

Luckily I found this snippet on one site and it all became clear:

Plush Cut Pile

Our nylon cut pile is constructed from 100% first quality yarn and is similar to what is found in most cars since 1974. It is tufted on a 1/8 gauge machine with 14 ounces of yarn per square yard. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.

Ultra-Plush Cut Pile

This carpet is a super plush upgrade to our standard Cut Pile. A 100% nylon cut pile manufactured with over 40% more nylon fiber than our standard cut pile. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.

Ok..still not sure here!!!

Neon Cut Pile

Our Neon Cut Pile colors are a great look if you want to make a statement! Although these are not stock colors, they would be appropriate for all applications. There is an additional 15% charge for all applications made with Neon Cut Pile.

What…not stock colors!!!??!!!   What?  Are you sure that is color

wasn’t stock?   It’s Pink!!!!

And the clouds parted and it all became clear.  The very last one was this:

 

100% Nylon Loop

A 100% nylon loop. This material is appropriate for pre-1975 applications only, and was the original type construction used in 1969-1973 Mustangs.

And it came in …………..Black!!!”

Thanks for reading

Tim

 

Auto Factoids for 11/7/2010 and Beyond

Catching up and finishing up Nov. 2010

11/10/14 – The first Dodge is produced and on the same day 11 years later Ford built its first Tri-Motor airplane.

Not the plane:

1914 - 4 Door Dodge Touring

This is the plane:

Fords 1925 Tri-Plane

11/11/1940 – The first Jeep

1940 Jeeps

11/12/1908 – GM takes over Oldsmobile.

11/25/1844 – Mr. Benz was more in Karlsruhe, Germany (Been there, the wine is excellent, the beer is better and the food is OUTSTANDING!)

11/26/1966 -The DeTomaso Mangusta debuts

1966 DeTomaso Mangusta

11/27/1870 – Joe Mach’s birthday. Yeah…the guy that started MAC trucks.  The company started when Joe and his brothers purchased a carriage and wagon company in Brooklyn, N.Y.  The first vehicle they produced was a tour bus. (1900)  Next up was rail cars and locomotives. At the time they used the name Manhattan.  Somewhere between 1910 and 1911 the name changed to Mack at about that time the Mack brothers bought a truck company.  Oh..in case you are wonder the Bulldog became their logo in 1922 and the name was changed to MACK Truck.  When I was a very young, we called all tractor-trailer Mack Trucks.

1910 Mack Hook and Latter firetrucks

New Auto Factoid format.

The Ford Mustang sold 419,000 cars in the its first 12 months on the marked. That number trumped the 417,000 cars set by the 1960………………Ford Falcon!!!!

1960 Falcon - 417,000 Sold First 12 months

Ford Mustang II Concept.

Thanks for reading.

Tim

Car Technologies U.S. vs. Others.

Just recently I started comparing technology in cars that we own.  A couple of months ago I purchased a 07 Corvette that has a lot more technology then the 84 Corvette I owned and a lot more than my 70 Mustang.  We have also owned two newer vehicles a 2008 Lexus GS350 and now a 2011 Lexus RX 350.  I’m not going to compare the technology between the two Corvettes nor would there be any reason to compare the Corvettes to the Mustang.

But what I have compared is the level of technology between U.S. cars and the two Lexus (Toyota) vehicles we’ve owned.

First up is the 2008 Lexus GS350.  We purchase the car in late 2007, which, as far as a technology time line would be concerned, is smack in the middle of digital music, video and touch technology era. To better frame the time line 3 years ago while attending the Fords on 4th Ave Car Show, here in Tucson, I meet up with a couple of Microsoft guys (one of them I knew from a previous contract I worked) doing the first demo of Sync in a Lincoln.  They gave me quick demo and it was excellent technology which is now about 3 years old. Yet this luxury Toyota only managed to have a horribly  located, headphone port to headphone port connection for your IPOD or MP3 player. Compare this with the technology in my 2007 Corvette, it at least plays MP3 formatted CDs as well as standard CDs.

Next is the 2011 Lexus RX350, three years further into the mobile data revolution and it still seems lacking in technology.  The GS350 had a touch screen information center, the RX350 does not. What replaced that is a joy stick/mouse type device.

From my wife's Rx

It seems a like a step backward.  It’s much easier for you to touch the screen while driving.  The RX’s device requires the moving around of a cursor, centering it on an icon and clicking the mouse-like buttons. ( Don’t get me started on distracted driving, phone calls vs. eating McDonald’s fries.)  The RX is limited to a USB connection for music and that is it.  Sure it has options for  satellite and blue tooth (as did the GS) , but techno-backtracking from a touch screen is a bit odd and no music storage is nearly pre-historic.

Just comparing  technologies for music availability the U.S. cars are ahead.  Take the  2011 Buick Lucerne, it has a 60 Gig hard drive for storing music.  This particular car can even record radio station you are on for playback.  Ford has a host of technology to store music and using Microsoft’s Sync technology, their Fords and Lincolns brands (the dash of the new Lincoln MKX will blow you away) are far superior to the what I’ve found in the Japanese cars. Even a tone-downed Chevy Cobalt has tire air pressure sensors.

While we were test driving the RX a week ago, I asked the salesman about the missing technology and he agreed that Lexus does in fact lag behind in offering  this type of technology.

Don’t you think that’s odd?  Are American car manufacturers that advanced?  Are our car companies just toss in everything, even the kitchen sink to sell cars?  Hey..neither of those are  a bad thing!!! I’m sold!  Besides it a lot easier to eat fries while driving if you have a touch screen to change your music!!!

Your thoughts?

Thanks for reading and drop me a comment.

Tim

Comment from Bill

This reminds me of a co-worker who bought a new Chrysler minivan recently. He was excited to tell me about how big the harddrive was, the DVD system, the ‘info-tainment’ bus, the ability of the ‘my gig’ to link to the satiellite,and on and on. I asked what engine he had-he paused- gave me a dazed look-and said he didn’t really know?

I think Lexus does what US car manufacturers used to do; they build a car that will travel 100K miles with just a few oil changes and one set of tires, and a resale value that is 65% of the orignal sales price 10 years later. The lag of technology does not errode the MSRP sticker prices Lexus still demands for their products while Government Motors still discounts their Buicks $5,000 off MSRP to gain a sale. Then five years later that Buick has a market value of $2,200, and the poor upside down owner is looking for his own ‘bail out’.

Me personally, I’d like to see any car manufacturer ‘de-content’ their cars a bit. It not only reduces the sales price, the weight of the car (some cars have six miles of wire in them now days), but actually increases reliability (less to fail) and performance. That original formula of the Boss 302, or Plymouth Roadrunner where you got roll down windows, a bench seat, and for a few dollars you could get a tach, AC, or tinted glass as the only options is my dream come true. Don’t forget a LARGE V8 powering the rear wheels STANDARD! I’d buy a new 2011 car tomorrow if I could get a taxi cab interior with a 300HP V8 for under $25,000. I looked at the 2011 Boss 302, but it still is techno-overloaded for me to call it a true muscle car.

Can you tell now why I replaced our grocery-getter-always-repair-proned Impala with a Grand Marquis? It is (or was-Ford stopped production in September) the closest car out there that meets my formula: no navigation-no harddrive-no MP3-no Sirius-no 8 speed automatic. Bench seat-4.6l police V8-4 speed automatic-RWD; thanks, thats all I need! I’m used to the blue hair jokes and still happy with my taxi cab, hopefully for the next 20 years and 200K miles.

I have often wondered if Dodge introduced a Challenger with Hemi V8, roll up windows, AM FM radio, and the minimum government mandated equipment for around $25,000 if they would sell, or does our generation require several thousand microprocessors to be interested in their cars?

Thanks for letting me sound off! Take care, Bill

A Note About Blogging – Original or Run of the Mill

In two months I will have been writing this blog for 1 year and I have enjoy every minute of it.

When  you blog like I do, to share a specific area of interest, you are always trying to increase readership.  Now if this were a commercial enterprise for me, then increasing my readership would be Job One. (Come on, which car company’s slogan was that?  If Ford jumped into your head that would be correct.) However, it is not, but still I’m always searching for a way to make this blog a place more and more folks want to view.

There are a lots of ways to do that, none of them huge as far as bringing in the masses and some aren’t inexpensive and others are labor intensive. (Guess which one I do…oh…yeah…cheap and labor intensive…Average Guy….say it!!!!……Average Budget!!) While searching for ideas or processes I could take advantage of,  I ran across some helpful hints. One in particular makes sense, namely, keeping the site updated regularly.  This suggestion dictated that it be daily, which is really a good idea.  However, the method it promoted was to jam the blog with other folks news feeds, articles and automatic updates from outside sources.

I thought about this a bit and I tooled around the web and looked at commercial blogs and forums and I realized that everyone had read this particular tip and employed it.  And I thought, I just don’t see the point.  The blog is no longer the owners writings, but really just a reorganization of things floating around on the web.  Nope, not for me.

I still think keeping up the daily effort is the right way to go, but I can’t do it in that manner.

Although I do pop on videos that I think are cool and maybe a link to a forum or another blog,  I’m going to keep the core of this blog full of original material, meaning my own scribblings and occasionally notes from the readership.

The life’s blood of a blog run like I run this one, are comments and readers.  So drop me a note, ask a question, or give me a suggestion  ( I do requests).

Thanks for reading.

Tim

 

C6

 

 

Auto Factoid for Week of 10/10/10

A couple of debuts for this week.

10/12/50 – Kaiser-Fraizer built their 500,000th car – 4 years later they opened up car manufacturing in South America.

 

1950 Kaiser-Frazers

 

 

 

10/13/1902 – Packard Motor Car Co was formed out of the old Ohio Automobile.

 

1902 Packard Run-About

 

 

 

10/15/24 – The original Mr. Government Auto Company Bailout. Mr.Lee Iacocca was born this date.  If that’s all you remember him for, turn your car lover card…this guy rocked it in the car world!!!!  This might change your mind…yea…the Mustang was his baby too.

 

How ya like him now???!!!!!

 

And now for the new arrivals!!!

 

10/14/65 – the Oldsmobile Toronado – a friend of my had one of these when I was in college back in the late 1970’s.  It was my first awareness of a front wheel drive  car.

 

1966 Toronado - Kool factor of 8.5 out of 10.

 

 

And one of my favorites

10/16/58 the Chevy El Camino arrives. Now I’m big fan of those fins!!!  These also spawned  the GMC Sprint and a few other variations.

 

1958 - Fin Heaven

 

Thanks for reading.

Tim

 

 

 

 

Racing in America – Henry Ford Foundation

Some of you know I don’t just write this blog, but participate on other forums as well.

For a little while now, I’ve been writing bi-monthly articles for www.racinginamerica.com site.

Here is some info on the goals of the organization.  No you don’t have to donate, but it is tax deductible.

 

Henry Ford Museum

 

 

 

This section of our website contains information and resources for anyone who might want to better understand this fascinating and complex sport.

Automobile racing is exciting and colorful, and those same qualities make it a stimulating and enticing subject; also conducive to developing knowledge and skills.

Our objective here is to provide both the motivation and the resources for further exploration and education.

The content here will continue to grow as time goes on. It will include more in-depth features on the history, people and innovations of American auto racing. We also will present practical applications of math, physics and science in racing, which provide career opportunities in fields that include design, engineering and a variety of technologies. All this is presented in a way that’s designed to spark interest and stimulate a desire to learn more.

Check in here often to find new opportunities and resources.

As a starting point, we offer these two downloadable Educator DigiKits in pdf format:

Science, Life Skills and Innovations in American Automobile Racing
Educator DigiKit
Teacher Guide and Unit Plan for grades 3-8

Physics, Technology and Engineering in Automobile Racing
Educator DigiKit
Teacher Guide and Unit Plan for grades 9-12

Auto Factoids for week of Sept 26

 

9/26/1967  Everyone loves this car  AMC’s Javelin the car was in the public’s hands by 1968.  I loved the body style.

 

1968 Javelin

 

 

10/1/1908 – Mr. Ford began selling is Model T

 

Model T Ford – Rag Top

 

(they were all convertibles!!!…just saying!!!)

 

Oh.. you’ll like this one.

10/2/1959 – Chevy introduces the Corvair.  Believe it or not I’ve seen some of the sale footage and they treated it like a jeep.  Chevy had drivers drive up  embankment, up and down streams with water over the tires.  This gave Ford a scare but it wasn’t until they could put together the Mustang did they really have an answer.

 

1959 Corviar.

My Brother-In-Law’s 1965 Monza…very nice car.

 

Thanks for reading

Tim