Name that Car – #2

Here is the new in the series.  Remember  you have to win 5 total to win.  To accomplish that you need to provide the correct car and year.  Good Luck.

Name that Car #2

It’s another GM car.

1960’s era

Not a Chevy.

Good luck.

Thanks for reading.

Tim

Name that Car – #1 – Answer

The answer is ………………….  Steve won this one.

1966 Chevy Impala

1966 Impala

Thanks for playing.  Next one  is coming up.

Tim

Name that Car – #1

Recap of the rules:

Here how it works.

A small excerpt of a car photo will be post and you have to guess the car and year.

Each pic will be accompanied by a few hints.  These will be production cars, not concepts or one off’s.

I’ll post as often a possible and keep a tally of the first right answers on the image that follows.

You have to be the first with the right answer and the first to reach 5 correct answers.

The first with five correct answers will win a free gift. Normally, car related DVD, CD or a Bolt Depot Fastener gauge (screw/bolt) – metric or U.S.  (These will be mailed to you, so you are going to have to provide an address.)

Additional note:  All of these cars will have had appeared on my blog over the past 1.5 years.

So here is the first image.

This is a GM.  Produced in the 1960’s.

Contest #1 Image

Post your best guesses.  First correct answer posted wins.

Thanks for reading…good luck.

Tim

Contest – Coming up – Name that car.

Contest – Coming up – Name that car.

Ok..I enjoy this one.

 

Here how it works.

 

A small excerpt of a car photo will be post and you have to guess the car and year.

 

Each pic will be accompanied by a few hints.  These will be production cars, not concepts or one off’s.

 

I’ll post them as often as possible and keep a tally of the first right answer on the image that follows.

 

You have to be the first with the right answer and the first to reach 5 correct answers.

 

The first with five correct answers will win a free gift. Normally, car related DVD, CD or a Bolt Depot Fastener gauge (screw/bolt) – metric or U.S.  (These will be mailed to you, so you are going to have to provide an address.)

 

I’ll start the contest tomorrow (4/11/11).  So stay tuned.

 

Brush up on your car parts.  (Additional note:  All of these cars will have had appeared on my blog over the past 1.5 years.)

 

Thanks for reading.

Tim

Aluminum – Chrome 70 Mustang Brackets Prt 2

Just thought I’d follow-up with the finished product.

If you look a back at the original post (http://wp.me/pKHNM-sS) you can catch up on this mini project.

After a few more hour of sanding with 220 and 600 grit and Purple Metal Polish (applied with the 600  grit and polishing wheel for my Dremel) you can see the results as compared with the original code aluminum pieces.

New Heim Joint

Now I won’t be able use the entire kit from Summit Racing but I will install this as the replacement for the old stock tension bracket.

Thanks for reading.

Tim

Livin’ with the Glitches – 07 Corvette

Technology…you love it, you hate it.

It’s the technology that can take a stock small block Chevy engine produce 420 hp and still get reasonable mpg’s. It’s the technology that kicks in the Active Handling when you get yourself in trouble ( I personally drive with it off).

But it’s the technology that can be troublesome and cause confusion.

My 2007 C6 has equal to or in some areas more technology them my wife’s 2011 Lexus RX.  Her car will let you know when the tire pressure is low, the Corvette lets you monitor it was you drive, right on the  Driver Information Center (DIC) and you can toggle between front and rear.  However my Corvette has nasty habit of giving me a false reading every now a then – gives me the “ding ding” warning and then prompts me that my is flat..not just low pressure, but straight to flat and then warns me not go to over 55 miles per hours.  The computer assumes you have run flat tires and that it’s safe to do so.  Of course there is nothing wrong with my tires pressure, (however, I always pull over to check it anyway with $1800 worth of rims and as much in rubber, you can’t be too careful).  Normally it clear up after a while.

Another interesting glitch is the “headlights suggested” warning.  That’s great but in the middle of a bright sunny Arizona day?  Happens all the time.  It darkens the dash so I can’t read it and then as some point it goes away and allows me to continue with just the daytime running light.

Every now and then the light for the passenger air bag show on, without a passenger.

One of other glitches which isn’t technology based, however none-the-less interesting.   It’s emerging now that, that C6 Corvettes with manual 6 speed transmission does not shift well in cold weather.  I’m not talking  85 degree below zero, I’m talking just under 50 degrees (above zero).  I live in southern AZ where under 50 degree weather isn’t as common as else where in the country. How do those of you in northern climates adjust?.  The most common issue is that the driver is unable to shift into reverse.  That is the issue for my 07.  Others have reported not being able to reach 3rd and 4th gears.

How about the known issue with the removal roof?  It often becomes unseated and squeaks unmercifully. The quick solution is to stop the car, unlatch and lift the top and the re-latch.  First ride I took my wife on, give her the impression that I got a lemon.

So are the glitches worth it?  Is the prestige of owning a world reknowned sports car worth the glitches?  Is 420 plus horsepower and suspension that sticks to the curves like a fly on flypaper?

What do you think?

Tim

Old Schoolin’ It 70 Mustang

Today I old schooled it.

No gadgets, no electronics, no error code readouts.

Just a ratchet, socket, feeler gauge and a set of 8 Autolite 45 spark plugs.  Oh and a crappy old garage radio, sometimes playing music sometimes just static.

It takes me back in reverse chronological order. Back to some of the important “car” stages in  my life.  Back to  my 82 Camaro, back further to my 69 Dodge Dart, back to my first 1966 Chevy (in 1976).

It takes me back one more stage, working in one of my father’s garages where I worked long days in the summer on customers cars and back a bit further watching my father work on our 61 Chevy Belair and his old Dodge pick up.  Even further back to my grandfather’s garage  with the half dirt half cement garage floor, watching the two of them trying to get that old early 1950 Ford or Chevy truck (we called it the “doodle bug” ..and no I don’t know how it got its name) running.

There was always a radio playing somewhere nearby often a baseball game or country music.

That’s one reason I love my 70 Mustang.  Working on it takes me back to those days.  Today I could have been 12 again, leaning over the fender of a real American made car, just the basic tools and an old radio tuned to a sports station recapping March Madness 2011.  It could have been 1970 again.

Finished up the job and fired the Mustang up and that started the way-back machine again.

 

1970 Coupe

 

 

Thanks for reading.

Tim

Quick Contest – Disc Brakes

Ok contest time. Free gift if you are the first to post the correct answer. What was the first car with disc brakes?

Come lets see what you know,

1970 Ford Mustang Mod Project

1970 Ford Mustang Mod Project.

1970 Ford Mustang Mod Project Heat and Sound help
http://wp.me/PKHNM-mJ