Chevy’s 283 – OH WOW – 300 HP in a What?

 So I just can’t let the 283 go.  I will find one,  restore it and hang it from my garage ceiling, umm…yeah..I don’ t think the misses will have a problem with that….ok maybe just store it a corner of the garage..or turn it to a coffee table..yeah……um…no.
Check out his 1966 Corvair with 300 hp 283.
Link is here:  http://www.automobilemag.com/reviews/driven/1012_1966_corvair_corsa/index.html
1966 Corvair Corsa Front Three Quarters In Motion

REVIEWS:

First Drive: 1966 Corvair Corsa

From the December, 2010 issue of Automobile Magazine
By Don Sherman
Photography by A. J. Mueller

The Chevy Corvair’s swing axles and heavy tail are implements of the devil, at least according to Ralph Nader’s Unsafe at Any Speed diatribe. Paul Siano, the creator of the mid-engine Siano Special, doesn’t buy any of that. He has owned, modified, and drag-raced Corvairs for more than half of his seventy years without suffering a single unintended spinout.

Siano bought — brand-new — what began life as a 1966 Corvair Corsa after supercharging a Volkswagen Beetle and owning a ’64 Corvair Monza Spyder convertible. He drove the coupe 50,000 miles before ripping out the stock 180-hp turbo engine.

A vintage Crown Manufacturing kit provided the means of upping the cylinder count and moving the engine from the back porch to the rear seat. That package included a tubular-steel subframe, an engine-to-transaxle adapter plate, a new transmission input gear, cooling-system pipes, a new shift linkage, and two new antiroll bars.

Siano’s prize possession is a rare, experimental, 283-cubic-inch aluminum engine block that General Motors pitched out as scrap. Engine builder Bryce Flinn added a roller cam, aluminum heads, and the induction overkill. Siano fabricated the necessary bits and brackets with an emphasis on minimal weight. He also added four-wheel disc brakes, Minilite wheels, radial tires, and a Ron Davis aluminum radiator.

Siano didn’t partition off his eight-pack of Weber intake trumpets, because he’s a patron of the rolling, reverberating, internal-combustion arts. Living with Webers is not for the meek of heart. When cold, they spit and stumble. When they’re up to operating temperature, they fill the interior with a combustible cloud of reversion gases. Smoking is discouraged.

Headphones are available for those rides when hearing preservation takes precedence over the din of a barely muffled Chevy V-8. Only two things keep the whirring water-pump pulley from biting the occupants’ elbows: the flush bolts that Siano installed in place of hex-head screws and every human’s natural preservation instincts

1966 Corvair Corsa Cylinders

REVIEWS:

First Drive: 1966 Corvair Corsa

|
More Photos
1966 Corvair Corsa Front Three Quarters In Motion
1966 Corvair Corsa Engine

When we drove to the test track, Siano’s homebuilt special revealed evil streaks: quick but heavy steering, vague shift linkage, and a throttle pedal that offers yes and no but very little maybe. However, a few miles were enough to establish an amicable working relationship.

Offered the opportunity to redeem itself, the Siano Special settled into stride to post a reasonably impressive performance report: 0 to 60 mph in 5.2 seconds, the quarter mile in 13.9 seconds at 104 mph, and a top speed of 130 mph. More amazing, the handling balance is excellent, offering just under 0.90 g at the limit of adhesion and only a touch of easily controlled oversteer when the fourteen-inch BFGoodrich Radial T/As finally let go. The cobbled-together chassis held firm over bumps, and the dampers kept body motions nicely controlled throughout the testing gauntlet.

Back in the Corvair’s day, GM fiddled with various mid-engine sports cars, only one of which (the Pontiac Fiero) ever made it to a production line. Leave it to a motivated Corvair enthusiast to demonstrate what can be achieved by adding a couple of cylinders and relocating the engine to a more productive location.

The Specs
Engine: 4.6-liter (283 cu in) OHV V-8, 300 hp (est.)
Weight: 2600 lb
Weight distribution f/r: 44.0/56.0%
Drive: Rear-wheel

Racing Corner 4 THE POSTON CAMARO!

Check out Average Guy’s Car Restoration, Mods and Racing – Racing Corner page and look over Vickie and Jodie’s 1970 Camaro

http://wp.me/PKHNM-oL

What’s Going On? How about an update?

That’s an email from a reader.  Been under the weather for a few days and a heavy workload this time of the year where I “pound salt” (hopefully a fair ratio of people get that).

So here is what is coming up:

Finish up the series on the 326 Pontiac engine.

Finish up the last couple entries for the Name That Car Contest (tally for this latest round coming up).

Feature Car – one of the Studebaker’s models.

Update on my 1970 Mustang “make-over”.

And some other stuff.

Thanks for reading.

Tim

Engine Mini-Series – Pontiac’s 326 Prt 1

Even while operating within the huge conglomerate that is (was)  GM, the divisions all strived to retain some semblance of their earlier identity or develop a separate identity. Even with continued mounting to conform (within reason) to use standard tooling and
engines parts out of the GM bins they strove to be unique.

The Pontiac division made this effort “job one” with slightly different body parts and paint schemes (Trans Am paint schemes).  What I think made them standout was the effort to stuff unique power plants in their offerings’ engine bays.

With this in mind, I selected Pontiac’s 326 CID engine.  This short production run engine had some special Detroit steel wrapped around it. But we’ll get to its uses and an interesting note about its purpose as related to circumventing a rule or two.

The 326 (restored)

This engine came about as a need to replace Pontiac’s aluminum 215 V8 engine. (It was actually built by Buick.) It was expensive to
build and not well received by the public, most just couldn’t get over the aluminum part and worried about durability and even about the ability for it to
say lubricated and whether coolant would eat way at the aluminum.  Of course we not differently now where aluminum is desired in many, especially with heads.

The 215 Aluminum (Buick built)

Coming up how –  Pontiac used the 326 –  a unique dealer trick that put this engine between the fenders of famous car and the difference between a 326 and a 327.

Thanks for reading.

Tim

 

Pontiac V8 engine

Pontiac 326 engine in 1967 Firebird

Name That Car – 2A

Here this one is going to be a tough one.

Jump in the ‘way back’ machine and guess this early turn of the 20th Century car.

Name That Car

Good luck.

Remember you need 5 correct answers to win.  If you are reading this on Facebook you need to chase the link and post on the blog.

Thanks for playing.

Tim

Name That Car – #1A Answer

The correct answer is 1956 Continental

1956 Continental

Bob Sweeting was the first correct answer.

(No I don’t believe we are related.)

Thanks for Playing Bob.

Next one coming up right up.

Tim

Name That Car – #1A

Ok.. Steve Sear won the last round.

This round the rules are the same.  You have to be the first to get 5 correct answers.

If you see this on Facebook you have to chase the link and post your answer on the Blog.

You’ll have to provide a mailing address to receive the prize.

So here is the first car in the next round.

This car was once it’s own company.

This particular car is 1950’s era.

Name that Car #1A

Good luck  and thanks for playing.

Tim

Chevy’s 283 Follow up Site

A while back I did an engine mini series on Chevy’s 283. Since then I found a great site for more information on the 283.

Links – http://wp.me/pKHNM-nu
http://wp.me/pKHNM-nB
http://wp.me/pKHNM-nT

http://chevroletphotosblog.com/?p=23046
Chevy 283 Motor | ChevroletPhotosBlog.com
chevroletphotosblog.com
‎1965 chevy 283 motor complete runs good 500.00 cash call 205-792-4699. Location: Tuscaloosa. State: Alabama City: Tuscaloosa tuscaloosa.americanlisted.com

Thanks for reading

Tim

Name that Car – #7Sup Answer

Steve Sears got this one correct. – Nice job.

I love these cars.

The Studebaker Golden Hawks are my favorite model in that brand.

This is the 1956 Golden Hawk.

1956 Studebaker Golden Hawk

Current tally is:

Thanks for playing.

Tim

Name that Car – #7Sup

Ok…this one is older than what I’ve been serving up.

Again, this is not one of the top 3.  This car was also very prone to rust because of the body structure.

Good luck.

Name That Car #7sup

Thanks for playing.

Tim