Auto Factoids for the week of Sept 23

We have a couple of debuts’ this week and a couple of Birthdays.

First up on Sept. 23 in 1969 the iconic and now recreated Dodge Challenger.

From this:

1969 Challenger

And this:

The Iconic General Lee

To this:

The 2012 version.

Virgil Exner was born on the 24th of Sept in 1909.  Who was “Ex”?    A car designer.  Oh…ok…of what?  Just a couple of designs, like all of these:

Studebaker Champion
Studebaker Starlight
Chrysler C-200
Chrysler 300 letter series
Chrysler 300 non-letter series
Chrysler New Yorker
Imperial 1955-1961
Chrysler Diablo Concept with Ghia
Plymouth Savoy
Plymouth Belvedere
Plymouth Fury
Plymouth Suburban
Plymouth Valiant
Dodge Coronet
Dodge Firearrow Concept
Desoto 1961
Desoto Adventurer
Bugatti 1965 concept with Ghia
Mercer-Cobra 1965 concept
Duesenberg 1966 prototype with Ghia
Stutz Blackhawk

 
Bill France was born on the 26th in 1909 in our nations capital.  Mr. France was an American race car driver. He is best known for co-founding and managing NASCAR, a sanctioning body of United States-based stock car racing.
The final debuts was on Sept. 26, 1967 when AMC released the Javelin.

1967 Javelin

Thanks for reading

Tim

Engine Line-up 1952 Desoto

Up until 1952 the only engine available was the L6 cylinder and it again was the main power plant for the ’52 production year.

This engine for 1952 was an iron block with a bore and stroke of 3.438X4.50 with a compression ratio of 7.0:1.  With 5 main bearing and topped with a Stromberg 380359 or 380349 or a Carter E9AI it produced 116 hp.   This was pretty much the same for all the L6’s but bore and stroked changed through the life of the company as well the number of main bearings (most numbering four) and the  displacement fluctuated between 236.7 and 250.6 CID. The engine disappeared from Desoto line-up in 1954.

L6 Engine

But the really big deal for the 1952 Desoto was the addition of what would become one of the most famous engines every produced.  It was the spherical segment combustion chambered engine, the  Desoto Hemi V-8.

It was an overhead value hemispherical combustion chambered iron block.  It displayed 276.1 cid and it’s bore and stroke was 3.626×3.344 inches and a compression ratio of 7.0:1.  It had hydraulic lifters and five main bearings.  Topped with a Carter 2bb (models 884S, 884SA and 884SC it produced 160 hp.  The Firedome V8s were the same but used the Carter models 908S,909S and the 910S.

A restored 52_DeSoto Firedome (museum photo)

1952 4 door Desoto

Thanks for reading.

Tim

1958 Ford Ranch Wagon Yard Art : Suspension Stripped and Frame Is Bare

Yard Art : Suspension Stripped & Frame Is Bare.

Not in my Hood – The Vanquish – Aston Martin

Ok…I watched this video and since I don’t live in that kind of neighborhood, do these really sound like that?   I like it!!!

 


Anyone have one of these in their ‘hood?

 

Let me know.  Send a pic!!!!!  Please!!!!  I’ll post it up.

 

Tim

FEATURE: High-Power Hybrids

Check out the Shelby connection with the Sunbeam.

 

This 1966 Sunbeam Tiger MK1A was eqiupped with a 260ci V8.This 1966 Sunbeam Tiger MK1A was eqiupped with a 260ci V8.

via FEATURE: High-Power Hybrids.

 

 

This 1966 Sunbeam Tiger MK1A was eqiupped with a 260ci V8.This 1966 Sunbeam Tiger MK1A was eqiupped with a 260ci V8.

The Green Hornet, Shelby’s one-off experimental Mustang, heads to auction | Hemmings Blog: Classic and collectible cars and parts

The Green Hornet, Shelby’s one-off experimental Mustang, heads to auction | Hemmings Blog: Classic and collectible cars and parts.

 


Shelby EXP 500. Photos by Jeff Koch.

When Ford began to get more involved in Shelby American’s affairs in 1966, it at least picked the right man to send to Shelby as that company’s new chief engineer, Fred Goodell. A hot rodder at heart, Goodell built many a souped-up Mustang for the Shelby works, including the fuel-injected and independent rear suspension-equipped one-off Green Hornet, which Barrett-Jackson recently announced will cross the block at its Scottsdale auction.

 

Officially known as the EXP 500, the Green Hornet’s genesis began with another Goodell-built car, a 1967 Mustang hardtop that he called Li’l Red. Fitted with Shelby decor and a Paxton-supercharged 428, Li’l Red eventually served as the template for the Mustang GT/California Special and very nearly became the template for a similar national version of the California Special. Ford in fact built two prototypes for a national version, including a Lime Gold 1968 Mustang hardtop with Deluxe interior and a 390/C6 drivetrain (VIN 8F01S104288), before round-filing the idea.

 

 

That Lime Gold hardtop then made its way to Shelby’s facility – at the time located in Ionia, Michigan – after Ford canceled its program. Goodell likely had a hand in the transfer, and once it arrived in Shelby’s shops, he tore into it. He replaced the 390 with a 428 Cobra Jet V-8 topped with a Conelec electronic fuel-injection system – Ford was already testing the systems to see how they would meet upcoming emissions regulations, so it was little trouble for Goodell to secure a system – and replaced the stock C6 with a C6 built to F350 specifications. He then swapped out the live rear axle for an independent rear suspension based around a Ford 9-inch center section and a cradle that bolted into the rear leaf spring mounts. Rear disc brakes and a full Shelby front suspension rounded out Goodell’s mechanical modifications, while darker gold-flecked green paint and a black vinyl top gave it some visual pop.

 

 

Goodell’s modifications reportedly endowed the Green Hornet with a 5.7-second 0-60 time and 157 MPH top speed, but yet again the ideas embodied in the prototype didn’t reach production. Unlike most prototype and experimental cars, however, the Green Hornet survived the scrapper: A Ford employee named Robert Zdanowski bought the Green Hornet – sans its EFI and IRS – but sold it six months later to Don Darrow, a Ford dealer in Cheboygan, Michigan. Darrow and his son Randy would later confirm the Green Hornet’s identity with Fred Goodell and restore it using a scratch-built IRS built to Goodell’s specifications along with a Holley ProJection EFI system (Goodell rounded up some components of another Conelec EFI system for the Darrows). It then passed through the hands of Steve Davis, president of Barrett-Jackson, before it made its way into the collection of Craig Jackson, who owned it at the time Jeff Koch photographed it for an article that appeared in Hemmings Muscle Machines #36, September 2006.

 

Jackson will run the Greet Hornet across the Barrett-Jackson block as part of the auction’s Salon Collection, which means that it will run with a reserve. Barrett-Jackson’s Scottsdale auction will take place January 13-20. For more information, visit Barrett-Jackson.com.

 

UPDATE: Barrett-Jackson sent over these two additional photos of the Green Hornet.

 

 

 

 

 

 

22 Responses to “The Green Hornet, Shelby’s one-off experimental Mustang, heads to auction”

 

 

  1. Mark Jackson says:

    That thing rocks; beautiful. Should go for a good buck.

  2. Fred stedtler says:

    In today,s market a one off car with bulletproof provenance will undoubtably sell over 1 million.

  3. Al says:

    Anyone know what happened to “Little Red?”

  4. Smedley says:

    I predict that by the year 2000, all Mustangs will have independent rear suspension.

  5. George says:

    Such awesome foresight by Goodell. Sad that those in power @ Ford didn’t build these for the public. One off cars are nice…now for “collectors”, but imagine seeing some of these scooting around town or at the drags.

  6. DaveO says:

    Rear suspension looks fresh out of high school metal shop!

  7. Tim Templeton says:

    I saw this car several years ago at a Shelby National Convention, it was very nice. It has also been featured in “The Shelby American,” the SAAC club magazine.

  8. Jack Nash says:

    I suspect it’ll end up in Ron Prattes garage.

    He’ll just keep his hand in the air til Spanky says,

    “Sold”!

  9. I guess what really stands out in the article is that when it comes to his own vehicle, Craig Jackson is selling his car WITH A RESERVE!

  10. This car spent time in Elmira, NY on Gould St. At the home of my childhood friend Chris Long. His father was the President of Conelec Fuel Injection. This car had a distinct note that we could tell from blocks away. I never personally drooled on this car but the sweat from my tongue can probably still be found on there! BTW we didn’t know that the Ford Factory codenamed this as the Green Hornet; we the neighborhood kids thought we were clever giving it that name! I had numerous pictures of this car, all we’re lost in the flood of 72!

  11. Jim says:

    The dash looks like it has/had air conditioning but there is nothing under the hood. . . . ?
    I guess just another mark of a heavily modified car.
    Besides the VIN and history, it doesnt seem like there are many special changes that any restorer could not build the same thing in their own garage.
    Nice, but it is not the same as a motorama show car!

  12. […] Green Hornet: Shelby’s one-off experimental Mustang heads to auction From Hemmings blog http://blog.hemmings.com/index.php/2…ds-to-auction/ Reply With […]

  13. tiger1959 says:

    I noticed that part too..I also noticed that the Barret Jackson fees have been creeping back also…at one point they were 14% charged to the seller plus 14% added to the buyers bill…before this madness the standard commission was 6% to each end…I predicted that these insane prices have to come down sooner or later…..can’t wait for the prices to match the 1983 numbers when you could buy a 428 Mach 1 for 3 paychecks…..I can dream can’t I…

    • tiger1959 says:

      I meant the part about the reserve at the auction…I’m sure “you get me”….

    • Oldcarman says:

      It is really a sad indictment how so many are so impressed by people with ore money than brains and are proud they paid more than anyone else. In the “old” days collectors marveled and laughed about the inflated “Hershey” prices, referring to the prices at the fall Hershey Swap meet. Times change, but egos don’t!

  14. dej says:

    Never warmed to Shelby “styling”. They look like pieces that were glued on that were laying around the shop. They quit when they had nothing left to glue on or ran out of glue.

    Nothing wrong with what’s underneath, but that is a homely car. Just because you can, doesn’t mean you should. Knowing what the car is worth doesn’t make it prettier.

    Shelby did the same thing with that Aurora engine joke Series 1. Didn’t know when to quit.

    Why does the rear sidelight on the passenger side appear to point down? The drivers side is straight.

  15. Osvolant says:

    I’ve always wondered why the muscle cars of this era were jacked up and not lowered, compared to the more sedate versions of the same car. This car would look spectacular(er) if it were lowered about 2 inches.

  16. Robert S. says:

    Not a bad looking car, but I’m torn……….A Shelby is either ‘vert’, or fastback.

  17. Brian says:

    The Tail Lights are a Bit Gaudy , and if they are sequential like the Cougars it might lessen the situation . On Performance tough I’d like to see this go out and Blow Off some Rice Burners etc. ..

  18. EarlWelch says:

    I’ll bet it goes for a high premium price, would not even guess how much! I have never owned a Mustang but working in that. Fastest ride I ever had in one was many years ago when a mechanic friend of mine came by to show what he had just “built”. It was a simple ’66 coupe, all stock looking. But, he had put a lot of hot stuff in it, big cam, special heads, headers, dual glass packs, big 4 barrel, custom intake and more plus a 4 speed. It had a nasty lope at idle and took off like a dragster!! He went through the gears and let off at almost a 100mph. [I was sorta’ glad of that!!] Oh, the road was out in the country but really smooth, it was his drag strip along with many others, there were big and some were long burn out strips all over the place. What fun!.

 

 

Leave a Reply

Name (required) Mail (will not be published) (required) Website Comment  

Featured Posts

 

 

Auto Factoids for the Week of September 9, 2012

Here are you Auto Factoids for the week.

Sept. 9, 1935 –  Studebaker ships its first order of cars (163) exports  to New York via the Pennsylvanian RR, final destination?   London, England.

photo

Sept 10, 1942 – Gas rationing began to help the war effort.

Three year and three days later, Sept. 13, 1945 Pontiac started making cars again after WWII.

1945  Pontiac  Silver  Streaks

Then on Sept 14, 1899, Henry H. Bliss was the first individual to be killed in a car accident.  He stepped from street car (trolley) and was struck by an electric taxi and died of his injuries the next morning.

September 15, 1881 in Milan, Italy, Ettore Bugatti was born.

Pebble Beach Concours d'Elegance 2003
1908 Bugatti Runabout

Thanks for reading

Tim

Choosing Chassis Mods for Rods & Muscle Cars

 

Posted By John Katz, July 16, 2012 in Chassis & Suspension, E-News

From HotRodandRestoraiton.com

Back when today’s classic muscle cars were the baddest new arrivals at the local Dairy Whip, chassis upgrades consisted of dropped spindles, lowering blocks and, maybe, traction bars. Since then, we’ve seen the performance aftermarket move from heavy-duty springs, shocks and sway bars through bolt-on front and rear subframes to complete replacement chassis—all with increasing sophistication and with the end nowhere in sight.

Like so much else in the hot rod market, the demand for a more-sophisticated chassis is driven by the high levels of performance and refinement that folks can now buy right off the showroom floor.

“People love nostalgia but we’ve been spoiled by modern daily drivers that are really good cars,” said Jeff Schwartz, president of Schwartz Performance Inc. in Woodstock, Illinois. Even compared to what was available just a few years ago “a new Chevy Malibu or Ford Taurus handles amazingly well, so people who have a bought a collectible car, after they’ve had it for a while, they say, ‘Man, this isn’t what I thought it would be.’”

That’s your cue, of course, to offer your customers something better, so I surveyed the market not only to find out what’s available, but also who’s buying what parts for which cars.

Money for Muscle

The first thing I found out is that the real action in aftermarket chassis is happening mostly in the muscle car arena.
“The muscle car segment remains the most robust and promising,” said Bret Voelkel, president of RideTech in Jasper, Indiana. “We see the level of modification and investment in these cars taking the same path that street rods took in the early ’90s: extreme quality, lots of horsepower and lots of time invested for creature comforts.”

Mike Hawley, sales manager for Heidts Hot Rod Shop Inc. in Wauconda, Illinois, also reported “significant growth in the muscle car market, and in ’50s and ’60s pickups,” he said. “The Tri-Five market has always been strong but now this segment also wants better handling.”

Dave Kass, customer service lead for QA1 Precision Products in Lakeville, Minnesota, has “seen a growing interest in Pro-Touring ’60s and ’70s muscle cars,” he said. “It seems this trend has shifted the emphasis from straight-line performance to corner-carving and all-around superior handling. These new goals require a more-advanced overall suspension package than these cars once needed—including more-sophisticated shock absorbers. Adjustable shocks and tubular control arms help shave weight and allow these cars to corner smoother and more predictably.”

The G-Body Generation

Schwartz even sees “the street rod market declining, and muscle cars gaining momentum,” he said. “It’s the demographics, the age of the people who are buying and building cars.” And these young rodders are looking for an even higher level of performance. “We’re in a good time, when you can have a 1,000-horsepower twin-turbo street engine that you can drive every day,” Schwartz said.

On the other hand, these same younger buyers don’t want to spend as much buying a car to rebuild. “So instead of a rusted-out ’69 Camaro for $10,000–15,000,” they’ll spend $1,500–2,000 on a 1978–1988 Buick Regal or Chevrolet Monte Carlo. “They were 18 in ’84 when the Buick Grand National was new, or in ’83 when the Monte Carlo SS came out, and those are the cars they idolized,” Schwartz said.

Voelkel agreed.

“A growing number of hot rodders recognize the ’78–’88 GM G-bodies as tomorrow’s mainstream muscle cars,” he said. “They are stylish, available and affordable.”

Mild or Wild?
Of course, every customer has different expectations and a different budget. You’re not going to make many friends if you disappoint the former or seriously exceed the latter. The best way to avoid either is always to ask the right questions before you close the deal.

“The first question to ask the customer is, ‘What are you going to do with the car?’” Voelkel advised. “Components such as 14-inch brakes, triple-adjustable shocks, independent rearends and zoomy subframes all serve their purpose, but with simpler components and thoughtful modifications, the customer can likely go 95 percent as fast for 50 percent of the money. Our triple-adjustable shocks perform at the highest lever—and we think they are the coolest thing in the world—but they’re overkill for 95 percent of hot rodders who might run two autocrosses a year. A customer can buy single-adjustable shocks instead and invest the remaining $650 in tires, brakes or track-day fees.”

“The most-critical step is to determine the end goal of the project,” Kass agreed. “Is the car going to be a cruiser built for comfort, a weekend warrior to be driven hard or a full-out purpose-built race car?”

“Customers have to be brutally honest about their goals—and their pocketbooks,” added Brent VanDervort, president and founder of Fatman Fabrications in Charlotte, North Carolina. “With a limited budget, limited fabricating skills and a desire for reasonable performance, bolt-on upgrades make a lot of sense. You see this regularly with the typical resto-mod muscle car that has been modified with dropped spindles, bigger sway bars and disc brakes. For a very reasonable outlay of cash and time, one can get a very capable car. We proved that in the first Super Chevy Challenge with a ’70 Chevelle powered by an iron big block. With $3,260 worth of bolt-on parts, we ran in the middle of the pack, on street tires, against LS1-powered ’69 Camaros with custom IFS [and high-performance rubber] and we proved how viable the low-dollar approach can be. But that Chevelle would never be a contender for Muscle Car of the Year.

“Building a high-end competitive muscle car that can run and show with the best requires a different mindset, abilities and budget,” VanDervort continued. “In fact, the word ‘budget’ is best forgotten. The very latest drivetrain, suspension and body mod tricks will be required, but usability and affordability go away. There is a continuum from practical to radical that cannot be denied. At the extreme, these cars become as unattainable as a quarter-million-dollar ’32 Ford.”
Kass pointed out a common error.

“We see people ordering shocks, springs, rod ends and other suspension components well before the rest of the chassis is put together,” he said. “They select parts based on educated guesses and some rough measurements. It’s better to wait until the brackets are fabricated and the vehicle is assembled. This allows for accurate measurements of dimensions and weights, and saves the headache of a vehicle that does not sit or ride the way the customer intended.”

“Another key issue is to avoid mixing suspension components from different manufacturers,” Hawley added. “That’s just asking for fitment, performance and reliability problems. The last thing you want is to have to return parts because of incompatibility. Our products are designed to work as a system, so you are assured that everything fits and that you have access to service support from a single source throughout the build.”

This last can be particularly important because of production tolerances.

“It’s important to recognize that, even as they left the factory, no two cars were ever built exactly the same,” Hawley said. If a car has been crashed and rebuilt, critical dimensions may vary even further from the factory’s specification. Such variations can cause fitment problems for even the most carefully engineered aftermarket kits. “That’s where it really helps to have access to expert technicians with years of experience,” Hawley added. The result is “optimized customer satisfaction.”

“It is so, so important to make sure the suspension components you choose are compatible with each other,” Voelkel said. “This means more than just making sure they will bolt up together, it means making sure that the final combination achieves the suspension geometry goals that you intended. A good dealer who handles several different brands should know if the components a customer wants to use are truly compatible with each other. But, truly, the best way to do this is to buy a complete system from one manufacturer.”

Handling Hardware

Kass remarked that QA1 “has put a huge emphasis on new product development over the past year,” he said. “We’ve built a new fabrication shop next to our current facility in Lakeville, giving us a total of 60,000 square feet of manufacturing space. That’s allowed us to launch a full line of fabricated suspension components, including anti-hop bars, strut-tower braces, front and rear control arms, anti-roll bars, and more. These components are all designed to improve handling while saving weight. We’ve also developed a full line of direct bolt-in rear coil-over kits for many different makes and models. They allow ride-height adjustability with no major modification to the vehicle.”

Heidts’ Pro-G independent rear suspension won the Innovation Award at the 2011 Hotrod & Restoration Trade Show. The bolt-in kit, which includes upper and lower A-arms, a 9-inch center section with positraction, half-shafts with heavy-duty CV joints, inboard Wilwood brakes with 10.5-inch rotors, and fully adjustable coil overs, is available for 1967–1969 and 1970–1973 Camaros and Firebirds, 1962–1967 Novas, and 1964–1970 Mustangs. With subframe connectors, the assembly bolts up solidly to Heidts’ Pro-G front suspension system, which includes heavy-duty dual crossmembers, tubular control arms, Wilwood brakes, a power rack-and-pinion and, again, fully adjustable coil overs. The front-end kit bolts in to any early Camaro or Nova, according to Hawley, whereas early Mustangs require cutting and welding. The Pro-G system is engineered for up to 600 horsepower.

RideTech recently introduced a Tru Turn suspension system for 1977–1988 G-bodies, “to make them perform as well as they look,” said Voelkel. The package covers all of the G-body vehicles and includes springs, shocks, control arms and anti-roll bars for both ends of the chassis. “Our StrongArms control arms are jig-welded, powdercoated and engineered to improve suspension geometry,” Voelkel said. “Our impact-forged mono-tube shocks are available in fixed-valve, rebound-adjustable and triple-adjustable models. Tru Turn is completely bolt-on and compatible with coil overs or our Shockwave components. The kit even includes brackets to convert the rear suspension to coil overs or Shockwaves.”

Also new from RideTech is a Tru Turn system for 1964–1966 Mustangs.

Schwartz Performance builds engines and even complete cars, but lately has been promoting its line of full-length replacement chassis for both body-on-frame and unit-body cars from the classic muscle era, plus the GM G-bodies mentioned before. Sales, Jeff Schwartz reported, “have seen a good amount of growth.” The company offers 20 different chassis, mostly for GM vehicles, covering the 1962–1967 and 1968–1974 Nova (including related X-body variants), 1967–1969 and 1970–1981 Camaro and Firebird, 1964–1967 and 1968–1972 A-body, 1978–1988 G-body, Tri-Five Chevy, and 1947–1953 Chevy truck. Ford Mustangs from 1964–1973 are also covered, as are Mopar B-bodies (1968–1970) and E-bodies (1970–1974).

Schwartz also pointed out that there’s more variation among the various GM brands and models than you might think, and that his company’s chassis are engineered to accommodate these small but significant differences. “A Tempest is different from a Chevelle,” he offered as an example. “The frames are different in length, and the body mounts and bumper mounts are different.”

Such attention to detail makes installation as simple as possible. “For cars that came with a full frame, our chassis literally bolts in where the old frame used to be,” Schwartz said. “The frame rails are narrowed at the rear to clear 345mm tires and if you want that extra-wide rubber, you’ll have to mini-tub the rear wheel wells, but if the customer can live with smaller tires, no cutting is absolutely required. Even for GM unit-body cars that were built with bolt-on subframes (Nova, Camaro, Firebird), the Schwartz chassis is a direct bolt in, requiring at most the cutting of some brackets. With Mustangs and Mopars, of course, the front frame rails must be cut off, but no Schwartz chassis requires any cutting of the body floor.”

Another major feature, according to Schwartz, is serviceability.

“Our A-arms have needle bearings with grease fittings, and our wheel bearings are tapered rollers with a nut on them,” he said. “A lot of other shops use Corvette hubs and bearings, but if they have play in them, you can’t adjust them, you just throw them away.”

The Schwartz rear suspension is based on a GM triangulated four-link, but with a significant upgrade: Teflon-lined spherical rod ends at all attachment points, instead of urethane bushings, eliminate the binding that was built in to the factory original.

Schwartz’s “basic roller” includes the frame spindles, A-arms, four-link bars, a power rack-and-pinion and a rearend housing. Most customers will order the chassis with single-adjustable RideTech shocks and 13-inch, six-piston Wilwood brakes, according to Schwartz. “That setup gives you a smooth ride, with handling very much like a European luxury car,” he said.

Customers who race or autocross can step up to stiffer springs and triple-adjustable RideTech shocks with remote reservoirs.

Service With More Than a Smile
VanDervort expressed “surprise that many hot rodders wishing to upgrade their cars lack the basic mechanical skills to do even normal maintenance,” he said. “They often have more enthusiasm than experience. That makes the need for better instructions, more photos and real[ly] good tech support critical. Simply having people who can take orders by part number will not suffice, and the fact that installers are asking more questions of the manufacturers—rather than self-proclaimed experts on various web forums—reveals who can really support their products.”

If you’re selling to a DIY customer, make sure they have the installation instructions and that they read them “all the way through, a couple of times before beginning the job,” VanDervort said. “Most problems come from not reading the instructions.”

“Look at the manufacturer’s instructions prior to the actual installation,” Kass echoed. “This will give you an idea of how involved the installation will be and, most importantly, an idea of what tools you will need to complete the job. There is nothing worse than tearing something apart and then realizing you don’t have the appropriate tools to put it back together.”

Beyond the Bow Tie
Brent VanDervort of Fatman Fabrications presented a somewhat contrary view regarding the future direction of the hot rod market.

“The boom in muscle car resto-mods may be fading,” he said. “That always happens when a segment gets hot. Cars get better and demand rises, boosting prices along with costs.”

The growth area he believes “is going to be in other 1955–70 cars”—not muscle cars, and not Chevrolets—”for several reasons,” he said. “Compare the prices of a ’61 Chevy bubbletop and the same body style on a ’61 Olds or Buick. The other GM cars are still out there and still available for more reasonable prices.” At a show or cruise, “an unusual brand can get as much attention as an expensive build of a more desirable, but also more common, car,” he said. “Then there are all the Ford vehicles from ’55–’70 to consider.”

Any car from that era doesn’t have as many plastic parts as later cars, so “restoration techniques will be familiar to most hot rodders—many of whom grew up with cars of that era,” VanDervort said. “Since most of these cars came with more advanced ball-joint independent front suspension (rather than the two-part spindle/kingpin of earlier IFS cars) they can be more easily upgraded with bolt-on parts.”

Fatman Fabrications offers dropped, disc-brake-style spindles for many cars of that era.

“We’ve redesigned our dropped spindles for ’55–’68 Fords, so they can be used with more easily sourced calipers, rather than the Granada parts required by our earlier design,” VanDervort said. “We also cover Mercury and Thunderbird for the same range of years. For ’58–’60 Buicks, ’57–’60 Cadillacs, ’58–’62 Oldsmobiles and ’59–’62 Pontiacs we have a 2-inch dropped spindle that can accept rotors with either a 4-3⁄4-inch Chevy pattern (if the customer is changing the rear axle), or a 5-inch pattern (if the stock rear end is retained), and we are continuing to fill in that 1955–’70 range as sample cars become available.”

 

Auto Factoids for Week of Sept 2nd

What went on in history this week in the world automobiles?

Frank Duryea drove the first car he built back in 1893 and just two years later almost to the day Duyrea Motor Co. Incorporated in 1895.

What was Frank driving?

a one-cylinder “Phaeton”

One year later in March 1896, Charles and Frank Duryea offered for sale the first commercial automobile, the Duryea motor wagon. Two months later, New York City motorist Henry Wells hit a bicyclist with his new Duryea. The rider suffered a broken leg, Wells spent a night in jail and the nation’s first traffic accident was recorded.
Frank went on to win the first car race.  A 54 mile event with the winner earning $2000.00.

The racing version!!!

 

The Duryea brother’s car evolved much like the rest of the cars of the era.

1905 Duryea Tourer

and

The 1913 Model C

Sept 4 was a big day for Ford.

First the founder Henry Ford was born in 1917 and 40 years later (1957) the Edsel when on sale.

1958 Edsel Corsair – Really..I don’t think they’re ugly.

 

Just few days later in 1954 Ford began producing the Thunderbird.

 

1954 T-bird

 

And finally for this week Sept 8 (or the 21st???)1903 was the day Preston Tucker was born in Michigan.  Best known for his car:

Way Kool!!!

But little known for his:

 

Armored Car and………….

 

…this fighter plan – The Tucker XP-57

 

Thanks for reading.

Tim