Category Archives: RoadRunner

Project BeepBeep – Seats, Windows and Panels…Oh My!

By | | , , , , , , , , ,
2 Comments

Welcome back to #ProjectBeepBeep!

Bill is going from bumper to bumper over his 1968 Road Runner and taking care the things that need attention.

This time he’s looking at the floors, seats and rear side panels as well as smoothing out the quarter windows regulators.

 


 

Consider using the proper tools when you remove upholstery panels.

These tool are available at many auto parts stores or on-line.

 

 

Here Bill is giving us a quick look at the issues with the seats and how to transport them safely.


 

Thanks for view the blog!! Bill will be back soon and maybe after I get these 600 7th and 8th Graders’s papers graded I’ll get some time for #ProjectSportsRoof.

Tim

 

projectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

Project BeepBeep 68 RoadRunner – Splash Shield and Antenna Projects

By | | , , , , , , , ,
2 Comments

Thanks for check back on #ProjectBeepBeep, Bill’s 1968 Plymouth RoadRunner!!!

After getting the brake converted Bill has been tackling some other little projects. Take a look at the splash shield and antenna mini-projects:

 


Here a look a some of the stills from the project.

The seal to force more air into the radiator and not under the hood!

Quick look a the guide/supporting wire on the end of the antenna.

Rubber Splash Shield (front)

Rubber Splash Shield (back)

Fitting up the rubber seal.

In place!

OK!!! THAT’S ENOUGH. PUT THE WHEELS ON AND I GIVE ME A RIDE!!!

Super nice work, Bill!!!!

And more little projects coming up!!

Thanks for reading.

Tim

68 Ply RoadRunner (ProjectBeepBeep) Dash Update – YouTube

May 11, 2017 … Bill sent out the circuit board that supplies the power to the all dash components on #ProjectBeepBeep.
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

Feb 2, 2017 … I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to …
Average Guy’s Car Restorations, Mods, and Racing

Welcome back to the #ProjectBeepBeep. We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this …
Project BeepBeep – A look at the Brakes

Mar 10, 2017 … Introducing #ProjectBeepBeep – Code H 1968 Road Runner. I’d like you to take a look at one of my constant readers classic muscle car.
restored car | Tumblr

Welcome back to #ProjectBeepBeep. Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake …

Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

By | | , , , , , , , , , , ,
5 Comments

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner.

Did I say this is the final chapter?   Well….

 

 



Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend coming by to help out.  Lets have Bill tell you how it all ended:

“I had to call in an expert; fellow I work with is a Mechanical Engineer and used to work as a Porsche/BMW mechanic before and during college. Together we got the wheels on the ground in about two hours. He recommended a last-ditch effort with the brake lines; we tightened all lines until the tube nuts were deformed. Also found an off center flare on one of the brake lines and he had a machine that fabricated the new line. Difficult to bleed; we bled the system 11 times (I counted) and went through lots of brake fluid (almost two quarts).

Took BeepBeep to the MOPAR show at Larry Miller Dodge almost immediately after getting the wheels on the ground!  Car stops on a dime and gives you nine cents change. Don’t miss power assist at all. This car will STOP!

Check it out:


 

I need an alignment next, but otherwise I really have no other problems to report. Everything working; oil PSI is 35 at idle, 55 at running down the road, and temp was a tick under 195F all day long.

Time to enjoy this ride!”

 

Bill,  thanks for the all the video and the tips you given the reader! 

Looking forward to your next ‘little’ project on BeepBeep.

 

Tim

projectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 7 Bench Bleeding and More

By | | , , , , , , , , , ,
1 Comment

Welcome back to #ProjectBeepBeep!

Bill is trying to finish up this the disc brake conversion and as things happen when you are dealing with our mechanical best friends, when you think its ready to go, things go south.

Look for the discussion on Dot 3 and Dot 5 brake fluid and tips for creating your own brake bleeding system.  And keep an eye out for DIY master cylinder bench bleeding tubes.

All excellent to note!!  Oh…and dig out that jack!!!

 


 

Lots more coming up on Project BeepBeep, so check back often.

Thanks for reading.

Tim

projectbeepbeep

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 6 Brake Lines Installed

By | | , , , , , , , , ,
1 Comment

Welcome back to #ProjectBeepBeep.

The 68 RoadRunner now has it brake lines installed and it’s ready for some fluid….or is it?

Bill takes us through the lines installed.

 


 

(Yes, I know it’s 1968 RoadRunner not a ’69)

Lots more coming up for #ProjectBeepBeep.

Thanks for check back in!!!

Tim

projectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Where The Heck Have You Been?

By | | , , , , , , , , ,
2 Comments

That’s a question I’ve gotten on other social media avenues and there is a good answer.

At this age I made a decision to make a career change.  Up at age of 58 and after 20 plus years as information technology guy (last position as Director of IT) I resigned and began the quest to make a move that I’ve always wanted to make.  So, it was back to college for a few courses and heavy-duty studying to pass certification exams – passed on the second attempt.

That’s where I’ve been.  Now I begin my new career as a High School teacher and that kicks off with my first teaching position at a charter school.  Things get rolling mid-July.

Now that will be a busy time but I’m comfortable with having spare time to keep working on my projects.

So, here’s what is coming up:

Bill has finished #ProjectBeepBeep disc brake conversion and we even have a video with it in motion!!!!

#ProjectSportsRoof has been…languishing a bit but I have a new transmission jack and I’ll be back to it in the next week…right now it going to be about 120 degrees, so not idea weather for working on the beast.

More #AutoFactoids coming up and some new stuff I have planned.

Thanks for checking back with us!!!

Tim

 

68 Ply RoadRunner (ProjectBeepBeep) Dash Update – YouTube

May 11, 2017 … Bill sent out the circuit board that supplies the power to the all dash components on #ProjectBeepBeep.

Average Guy’s Car Restorations, Mods, and Racing

Bill is getting soooooooooo close to having ProjectBeepBeep on the road again. This update takes a look at the brake actuator rod. The Rod. Bill mentioned 303 …

Project BeepBeep – Brake Actuator Rod

By | | , , , , , , , , , , ,
1 Comment

Bill is getting soooooooooo close to having ProjectBeepBeep on the road again.  This update takes a look at the brake actuator rod.

The Rod


 

 

Bill mentioned 303 Protectant  and here is a bit of information from the web site:

Originally engineered for aerospace and aviation applications, 303 Protectant provides superior protection against harmful UV rays that can cause discoloration, fading and cracking of vinyl, rubber and plastic surfaces. 303 Protectant also helps repel dust, dirt, lint and staining. Safe and effective for vinyl, gel-coat, fiberglass, carbon fiber, synthetic or natural rubber, plastics and finished leather.
303 UV Protectant Wipes for Vinyl, Rubber, Plastic, Tires and Leather, Pack of 40:

  • 303 Automotive UV Protectant brightens surfaces and keeps your car looking newer, longer
  • This formula provides superior UV protection for any rubber, plastic, vinyl, eisenglass, PVC, gel coat and fiberglass surfaces of your vehicle, such as your dashboard, windshield wiper blades, and even your tires; not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings
  • 303 UV Protectant not only protects against fading, discoloration and cracking from harmful UV rays, but repels dust and stains too helping to extend your vehicle cleaning
  • Rinse-free formula leaves a non-greasy, dry matte finish with no odor and is non toxic and water based; 100 percent free of grease-producing silicone oils and petroleum distillates
  • 303 Automotive UV Protectant is an easy to use spray on formula that comes in a 16 fl oz bottle with trigger sprayer
  • We guarantee our products

Warnings:

California Proposition 65 Warning: This product contains a chemical(s) known to the state of California to cause cancer.

More coming up shortly on the brake lines installation.

Thanks for checking in!!

Tim

projectbeepbeep

Diamond Valley Mopars Public Group | Facebook

Welcome back to #ProjectBeepBeep. Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake …
RoadRunner – Average Guy’s Car Restoration, Mods and Racing

RoadRunner | Bill continues with his march toward a complete brake system replacement for #ProjectBeepBeep his 68 Plymouth Road Runner. Here is the …
Infinite Audio – Home | Facebook

Getting some of the custom painted @fabfoursinc parts put on #projectbeepbeep. @factor55llc #jku #jeepproject #grumper #custompaint #stormtrooper …
68 RoadRunner Disc Brake Conversion – Part 5 – YouTube

Apr 24, 2017 … Welcome back to #ProjectBeepBeep. Bill’s got the wheel cylinders installed for the 1968 RoadRunner and …dang…missing brake lines!!

Project BeepBeep – 68 RoadRunner Dash Update

By | | , , , , , , , , , ,
Leave a comment

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner.

If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.

 


 

Next up an update on the disc brake conversion – almost done!!!

Sounds like Bill will be on the road in no time.

Thanks for reading.

Tim

projectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

By | | , , , , , , , , ,
3 Comments

Welcome back to #ProjectBeepBeep.

Bill is working on finishing up the brake conversion. Here is a progress update.

Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim Sweet AG Car Restoration – www.AGCarRestoration.com
Here’s a look at the proportioning valve.

Proportioning Valve

Proportioning Valve

 

Comparing the bends in the new brake lines from the master cylinder against the old.

 

 

Missing brake lines are in and some dash work.

Note: I forgot to add the credits for these videos: Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB
Editing Tim Sweet AG Car Restoration – www.AGCarRestoration.com

Lots of good information here, especially when it comes to ordering parts online.  Make sure you know who you are ordering from, return policy and as Bill mentioned any tech help you might need is available (free is always good, too).

More coming up on #ProjectBeepBeep, #ProjectSportsRoof and more.

Thanks for reading.

Tim

 

projectbeepbeepprojectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – A look at the Brakes

Bill takes a look at the heavy-duty brakes that came on the ’68 Road Runner. Bill doesn’t like the stopping power that these give him and even though they are in good shape, he may still upgrade them.     Here are a couple close-ups of those heavy-duty brakes:   That’s some great information on brake …
Project BeepBeep – ’68 Road Runner – Disc Break Conversion Part 3

Bill continues with his march toward a complete brake system replacement for #ProjectBeepBeep his 68 Plymouth Road Runner.     Here is the Bill’s update.     There is more coming on the #ProjectBeepBeep and #ProjectSportRoof. Keep an eye out  for dates for the new Average Guys’ Car Restoration Live Event on Face Book AG Car Restoration …

Project BeepBeep – ’68 Road Runner – Disc Brake Conversion Part 4

By | | , , , , , , , ,
1 Comment

Welcome back to Average Guys’ Car Restoration and an update on Bill’s 1968, 383 Plymouth Road Runner, dubbed #ProjectBeepBeep.

Bitten by a need to get his muscle machine back on the road with the superb stopping power of a disc brakes, Bill burns the midnight oil.  Check it out:

 

 

New Steel line in place and rubber brake hose connected up.

Calipers in stalled and seated (custom seated – with a hammer)

Portioning Block – shinny and new!

Bill gives you an update on all the work done this far on #ProjectBeepBeep and the disc brake conversion.

Look forward to see this monster on the road.

Thanks for reading.
Tim

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – A look at the Brakes

Bill takes a look at the heavy-duty brakes that came on the ’68 Road Runner. Bill doesn’t like the stopping power that these give him and even though they are in good shape, he may still upgrade them.     Here are a couple close-ups of those heavy-duty brakes:   That’s some great information on brake …

Project BeepBeep – ’68 Road Runner – Disc Break Conversion Part 3

Bill continues with his march toward a complete brake system replacement for #ProjectBeepBeep his 68 Plymouth Road Runner.     Here is the Bill’s update.     There is more coming on the #ProjectBeepBeep and #ProjectSportRoof. Keep an eye out  for dates for the new Average Guys’ Car Restoration Live Event on Face Book AG Car Restoration …