#ProjectSportsRoof – Shock Tower Braces Part I

So much work going on with my ’73 Mustang (#ProjectSportsRoof, #SR73), new carb, brakes, shocks it would seem that there should be time for the smaller projects.  But currently due to the pandemic supplies locally are focused on newer cars and the things that don’t sell quickly aren’t being stocked at the local auto parts stores.  Most major parts have to be ordered and shipping times are Sooooooooooooooo    Slooooooow, that there is time for these side project.

What better way to spend that time then to get the Mustangs shock tower braces ready for installation.  Waiting until all or most of the engine work is done before actually installing them, because I don’t want work around them or keeping removing them to gain access to upper parts  to the engine.  But they need painting.  I opted not to use the chrome plated option and go with steel and paint them myself.

Why bother adding Shock Tower Braces?  Dude….for unibody chassis, like the early Mustang had (only sub-frames) they provide extra stiffness between the shocks.  Helps keeps things from twisting when doing some “spirited” driving or on the track.

Here is the prep of the braces for my Mustang:

 


Part II will be coming soon and you’ll show awful the first shots of paint turned out.

Also brakes and and upholstery coming for the big Stang.

Thanks for checking in.

Tim

 

EPIC MOMENT – #PROJECTSPORTSROOF MEETS #PROJECTBEEPBEEP IN THE SAME AIR SPACE

The title should say it all!!

Bill stopped by and we tweaked the timing and carb on #ProjectSportsRoof.

For the first time the stars of this blog are in the same Air Space!

Check it out!


It was a good day. The tweak smoothed out the new carb and I don’t think I ever saw Bill this happy working on BeebBeep. It must be he’s really a Ford guy at heart (Oh his daily driver – A MUSTANG!!).

 

Thanks for checking in!

Tim

Auto Parts Stores and Auto Parts Clerks…Are there any good ones left?

I remember when you could go into a auto parts store and the clerks knew something about cars.

When I was a kid (back in the early 1970’s) my Dad owned a body shop. I’d work there on weekends (for …”the roof over you head”) and summers.  I learned a lot about cars and enjoyed it (most of it).  One of the coolest things was heading over the automotive parts and paint places.  So much cool stuff to look at, paint books with paint chips in them, tools and gadgets. You could talk for an hour about the cars you were working on.  If you asked a question they normally had a useful answer. If you wanted advice you would get some, sometime even if you did ask there was a good chance you’d get some.  NAPA was big back then and had paint as well.

Those places are long gone now, mostly.  Now no one has the parts in stock and worse most of the clerks have no idea about car parts (insert Rock Auto theme song) and there is nearly 100% reliance on a computer. There is just no way a parts clerk should utter the phrase “I can order it.” Oh and talk about your car project?…’fer getta bou it’!

This whine is was brought about by my recent purchase of a fuel pump for #ProjectSportsRoof (my 1973 351 Cleveland powered Mustang). 

Normally, I don’t use names of companies but I’m going to now.

I purchased the Speedmaster  fuel pump from Summit Racing Equipment.  Speedmaster also has their own site where they sell these as well.

Specs:

Brand: Speedmaster

Manufacturer’s Part Number: PCE146-1014

Part Type: Fuel Pumps

Product Line: Procomp Electronics High-Volume Mechanical Fuel Pumps

Summit Racing Part Number: SDM-PCE146-1014

UPC: 840136507376

Fuel Pump Type: Mechanical

Flow Rate: 115 gph/435 lph

Fuel Pressure (psi): 6 psi

Fuel Pressure Regulator Included: No

Sending Unit Included: No

Inlet Size: 1/4 in. NPT  —not

Inlet Quantity: One

Inlet Attachment: Female threads

Outlet Size: 1/4 in. NPT —not

Outlet Quantity: One

Outlet Attachment: Female threads

Gasket Included: No    -actually yes 2 gaskets

Wiring Harness Included: No

Mounting Bracket Included: No

Mounting Hardware Included: No

Pulley Included: No


The pump is designed to be configurable to give the best fit possible.  The pump showed up with no fittings – which I guess it normal now days.  It also showed up with no instructions.  Just the pump in the box and two gasket stuck under the bottom box flap.  Instruction would have been nice if I need to swivel the IN/OUT.

I didn’t think the hardware would be a problem I could use the male end from the old pump and pick up the other at a local parts store.  I figured that I’d double check their site for instructions just in case I need anything different, after all this pump pushed a bunch more fuel then the OEM version.

I went to Speedmaster’s web site and looked up the pump and clicked the instructions link.  Nothing happened.  I called the company to see if they could email me instructions.  The ‘clerk’ said “We don’t have any instruction, but I do have diagram.”  I prompt him with, “You don’t have instruction?”  He confirmed.  I said O.K. , send me the diagram, thinking to myself, that will have some information.  Here is what I got:

Lets compare:

This is my ome pump

This is the Speedmaster pump.

Not seeing it!!!

So I called up Summit Racing Equipment and spend 1 hour 22 minutes on hold (I was editing video during that time).  I was then requested to leave my number and a tech could text me back.    5 hours later….I get a text.  I asked the question about instructions.    The next day I get a text that says “It’s a pretty straight forward installation.”  So I called. Summit again.  I was on hold for 45 minutes and finally got someone to answer my question which was – what size it the OUT thread so I can get a fitting.  (originally I thought I’d get the proper fitting for the flared steel line).  Summit told me I shouldn’t use the steel line and to just get the  male to 3/8 barb.   I asked again what size threads?  He said 3/4″ to 3/8″ barb.   I ran to 3 Auto Parts stores and no one had this fitting. (That is the short version – most didn’t even know what I was talking about, much less knew if they had anything like that.)  I order some from Amazon and they next day delivery with my Prime membership! They didn’t fit.  So I found Speedmaster on Facebook and asked the question.  Here is how that 3 day conversation went:

Speedmaster Automotive Parts Store
Tue 6:43 PM———————————————————–Note the time.
I purchased this: Brand: Speedmaster

Manufacturer’s Part Number: PCE146-1014

Part Type: Fuel Pumps

What size male fitting do I need from your pump to a 3/8 barb?
Tue 11:07 PM——————————————————————–Note the time
3/8 npt—————————————————————————Response
Wed 2:29 PM——————————————————————-Note time
38 npt to 38 barb?
3/8 npt to 3/8 barb (my correction)

No response
?

No response

(I called the Speedmaster again then Facebook messaged them)
Wed 4:12 PM————————————————————————Note time
I’m confused. Summit says 3/4 to 3/8 barb. I just talked to someone at your
location via phone they said 3/4npt. But 3/4 npt does not fit. If I didn’t already
have the pump in the car I’d return it and buy something that there with clear
instruction and well informed support. ….🙁
I’ll have to pick up both sizes tomorrow and I’ll get back to you on the actual size!

—————————————————————————————-NOTE LACK OF RESPONSE.

(My follow up to the chat)
Thursday 1:13 PM
Here is exactly what fitting is needed.

805NSED – 3/8 barb X 5/16 npt Hose Barb X Inverted Flare

Something you SHOULD know but
no one did. Don’t feel do bad even Summit, where I purchased it got it wrong.

#MissingTheGoodOldDays

Thanks for letting me whine!!!

 

Tim

 

 

Project SportsRoof Vapor Lock or Not IV – Fuel Line Repair

Thanks for checking back on #ProjectSportsRoof.

I continue to chase down the fuel issues on my 73 Mustang’s 351 Cleveland.

Last time on the “Day of Discoveries”  found the fuel line crushed.  This is the repair video.  WARNING:  It is longer than normal with a few Average Guy tips.   Link:

ProjectSportsRoof – Front Shocks and A Day of Discoveries.

Welcome back to #ProjectSportRoof, the on going saga of my 1973 Mustang Sports Roof. I have a lot of

 

So kick back, give it a watch and drop me a comment or two!!

 

 


There is a lot more to come. Keep checking back!!

Thank you.
Tim

ProjectSportsRoof – Front Shocks and A Day of Discoveries.

Welcome back to #ProjectSportRoof, the on going saga of my 1973 Mustang Sports Roof.

I have a lot of projects going on with ProjectSportsRoof, mainly because it NEEDS a lot work.  Plus the whole COVID19 thing has parts on back order and shipping delays, blah, blah, blah!

I ordered a new fuel pump and the project shipping date was Oct 2020….canceled that order.  Found one that was in stock and shipped in 3 days – DONE!

So as I wait for that important part, I figured I’d replace the front shocks, which by the way were on back order for 2 weeks.  Turns out it was a good idea, as it uncovered an issue that might help solve a current problem…you’ll see!!

Now, I didn’t show you my step by step removal and installation, shocks are pretty straight forward.   Here’s the video (BTW I don’t normally do a sit down chat but I did today):

 


Fuel pump can in today, check back for that work!

Thanks for checking in!

Tim

 

 

ProjectSportsRoof – Vapor Lock or Not – Part III Fuel Pressure Test

Welcome back to #ProjectSportsRoof – my 351C powered 73 Mustang Sports Roof!

I’m pressing on with tracking down the cause of the frequent stalling of the bored .040 351C.

I suspected vapor lock, but with the fuel line insulated against the heat of the manifold and block, I didn’t get the ‘boiling’ sound, that might not be the issue.   But I couldn’t keep it running in idle.  So the fuel press test was next.  Here’s the video:

 


As of this afternoon, the Cleveland is having issue starting – fuel related.

The fuel pump feeding the juice to the carb is a generic stock not sure of the specs.  Here is what I’m going to replace it.  Oh and it is tough to find anything for 351 Cleveland on the local market.  Even on-line, I was looking at out stock everywhere and ship dates of Oct 2020!  Thanks Pandemic!!!

So I found this:

Procomp Electronics High-Volume Mechanical Fuel Pumps PCE146-1014

Fuel Pump, Mechanical, Chrome, 115 gph, 6.5 psi, 1/4 in. NPT,

Flow Rate: 115 gph/435 lph

Inlet Size: 1/4 in. NPT

Inlet Quantity: One

Inlet Attachment: Female threads

Outlet Size: 1/4 in. NPT

Procomp Electronics high-volume mechanical fuel pumps are designed to work with stock or mildly
modified engines. They deliver free-flow outputs of 115 gph–that’s twice what a normal pump
typically delivers! These pumps are plated with a bright finish for good looks and corrosion
resistance. The lower housings can be rotated through 360 degrees to make fitting into tight
places a snap, and they have large orifices for high flow rates. Procomp Electronics high volume
mechanical fuel pumps are not compatible with methanol or alcohol fuels, and should not be used
with fuel injection systems. Order the model recommended for your specific vehicle and engine size.

Drop your thoughts in a comment!!

Thanks for checking!!

Tim

Vapor Lock – 351 Cleveland in #ProjectSportsRoof

Vapor lock.   What is it, why does it happen and how to tackle and solve the problem.   We are going to do it

#ProjectSportsRoof – Vapor Lock – 351 Cleveland Part II

Welcome back. I’m shacking down the partial rebuild of the 1972 351 Cleveland in my 1973 Mustang dubbed,

#ProjectSportsRoof – Vapor Lock – 351 Cleveland Part II

Welcome back.

I’m shaking down the partial rebuild of the 1972 351 Cleveland in my 1973 Mustang dubbed, #ProjectSportsRoof  (originally called SR-73, but reader keep asking me if could do MACH 4+ …yea, I didn’t think it was funny either).  New cam, lifters, rods and a few other things, need to be giving a good working out.  However, fuel issues have popped up.  

Suspected vapor lock, but not sure, so I’m taking it one step at time.  Step one insulate the gas line from the block.  Here’s the video and results.  I could have edited a bunch out but I wanted the viewers to see it as it happened – in this case it’s more like HEAR it. This is my way of saying the video is ….um…not great!!   Watch the video and then give me your opinion on which option below you want me to try next.

 


Some of those options are?

         1.  Fuel Pressure test (because it might not be vapor lock)

         2.  Another option is to install an Electric Fuel Pump near the tank. This pressurizes most of the
         fuel in the lines. Fluid under pressure is harder to vaporize.

          3. Other options include installing a Phenolic Carb Spacer and/or a Carburetor Heat Shield to
           keep the carburetor cool.

         4.  Swap from an 850CFM to 750 or 650CFM Carb (because it might not be vapor lock)

Find the comment box and let me know which one you want to see attempted or email me at AGCarrestoration@cox.net.

Thanks for checking in.

Tim

 

Vapor Lock – 351 Cleveland in #ProjectSportsRoof

Vapor lock.   What is it, why does it happen and how to tackle and solve the problem.   We are going to do it together!

My 1973 Mustang with the newly re-constructed engine has gladly stepped up and volunteered  to be our test subject. (Sarcasm or dismay?  You decide!)

Where to start?  Let’s go from the discovery of the problem to the possible causes to the possible solutions.

Took the gray beast out for another shake down run. I ran down the to local auto parts store, about a 3 mile drive and it was a spirited drive.  I was searching for a bolt for the passenger side seat, some how misplaced the original when I was putting the new floor  panels and carpet in.  I was in the store for 8 minute top – they aren’t as friendly as they use to be.  Use to be you would show up and chat up everyone and discuss what you were working on.  These days you are lucky to find someone that knows what a bolt is.  (Sorry but that’s almost true!!)   As of this writing we are still in COVID19 lock down…(don’t judge me….I really needed that bolt!!!) and they were even less friendly.  Sorry…I digressed. (O.K., if I was really sorry I’d go back and remove this, so lets just consider it “color” and not digression).

After 8 minutes (most of that as the clerk silently pawed through some bolts in the back), I returned to the Mustang and turned the key.  It started hard – 4-5 tries.   On the drive back it kept feeling like she wasn’t getting gas. Temporarily losing a bit of power.   Got home lifted the hood and I could hear the gurgling in the carb.

Here are some specs on the 1972 351 Cleveland that is in my 1973 body:

351C V2

The block is bored out .o4o make it 4.040″

Crank machined .020 under.

Topped with a Edelbrock Performer intake and 1413 800 CFM 4bbl Carb.

Just replaced the cam with Comp Cam FC 268H-10 grind.

                                    — Gross Valve Lifit .494 Intake and .494 Exhaust

                                    — Duration .006 tappet lift  268 for both Intake and Exhaust

                                    — Valve Timing @.006

                                                             —Intake   Opent 28.0 and BTDC  Closed 60.0  ABDC

                                                             — Exhaust  opent 28.0  and BBDC  Closed 20.0   ATDC

Installed Specs

@106.0  Intake center line

Duration @ .050                       Intake 219                        Exhaust 219

Lobe lift                                       Intake .2860 and the same for Exhaust

Lobe separation                          110.0

 

What is vapor lock?  

Vapor lock causes a car to stop running when the fuel in the system overheats. It is most likely to happen when driving on hot days and in stop-and-go traffic. (It was only in the upper 80’s that day) Constant acceleration and deceleration makes your engine work harder, causing it to run hotter. (I was doing a bunch of accelerating – da!) Excess heat causes the fuel to vaporize. This keeps the fuel from reaching the engine.

Many carbureted engines have fuel pumps located near or next to the engine. (Yup!)  The pump’s closeness to the engine, as with some T-types, causes the fuel in the line to become very hot. When heated, fuel turns to a vapor, like water turns to steam when boiled. This process is hastened by the vacuum created in the line as the fuel is sucked into the engine.

When the fuel turns to vapor, the fuel pump can no longer move it through the system. As a result, the fuel doesn’t get to the combustion chambers; the car runs roughly; or it dies. Meanwhile, the car will not restart or will continue to have problems if it does.

So, the main cause is over heated fuel and I’m guess hearing it boiling in the carb is clearly not a positive thing.  Other cause could be:

— portions of the fuel line are to close to the engine or exhaust causing the over heating.

— to large of a carb leaving extra gas sitting in the bowls, being heated.

So, first I want check the positions of the lines.   Check out the video.

 

 


 

There is only the one area that could be the problem and that is from the fuel pump to the carb.  I pick up some Vapor Block
Fuel Line Split Sleeve by DEI.  So I’m gong to wrap that area.  We’ll see what happens, so check back

 

 

 

Thanks for check in!

Tim

#ProjectSportsRoof

 

 

 

Original Engine? Should you keep it?

I’m not a “huge” numbers matching guy, but there are a few cars that I think we should always try to keep their original power plants. Corvettes are one of those cars and Mustang – mostly.

My 1984 Corvette had the much loved (by much loved, I mean hated) GM CrossFire engine (with all of it’s 205 hp). It was a huge pain. I must have rebuild those injectors 5 times in the course of my ownership but there just weren’t that many CrossFires left out there.

So Corvettes should retain there original engines and the same is true as I mentioned  some Mustangs.  Clearly not with my 1970 Mustang that was born with a 250, six cylinder with dealer installed under-the-dash A/C.   It wasn’t going to cut it. Turn on the A/C and you had a peddle car.  I didn’t stray to far, I ordered 302 long block, bored .030.   I caught some flack from the local Ford 6 cylinder crew for the swap…but it might have been because I didn’t offer them the tired old 250.  I donated it to young kid was learning at a local shop and needed a engine to work on.   You can see a lot of those details right here on my blog.   Entirely different story with #ProjectSportsRoof (1973 Mustang). It’s a 351 Cleveland  and there aren’t many of those left out there. I rebuild the engine a year and 1/2 ago.  Just had a lifter go rouge (with only 250 miles on the rebuilt) It now has a new comp cam lifters and rods.  For less than 1/2 of all that was spend I could have dropped in 400hp Windsor crate engine, but I just couldn’t.

What do you say?

 


Thanks for checking in!!

Tim
#ProjectSportsRoof

1973 Mustang -Project Sports Roof – Mach 1 Grille Part II

Thanks for checking back on #ProjectSportsRoof.  Progress is being made and I’d like to finish up these post

Project SportsRoof is Back on the Street Part II

So what kept my ’73 Mustang from running free around Southern Arizona?

Well, a lot of things, but where to start?

You’ll recall there was that pesky head gasket leak with water bubbling between the block and the left side head.

 

Then here was this:

The transmission leaked around the kick down lever I installed.

The gas tank needed to be dumped and accelerate pump replaced.

Started and coil decided to passed on to the great scrap metal pile in the sky.

Oh and there was that lifter noise. Check out the video:


After the a new camshaft install, new push rods, new spark plugs she runs like new—-ish!!

Thanks for stopping by.
Tim

#ProjectSportsRoof