70 Mustang Dash Removal Videos

Sorry for the technical issues with the videos. It seems that WordPress has issues with longer videos, so I’ll have to keep them a bit shorter.

These next links will take you to the videos, but you’ll have to click the back button to get back to the blog.

This first video is when my son and I discovered that there was an additional bracket under the lower trim pieces.

http://s299.photobucket.com/albums/mm296/timsweet2200/?action=view&current=MVI_6869.flv

This next video is view of the partial removal.

http://s299.photobucket.com/albums/mm296/timsweet2200/?action=view&current=MVI_6876.flv

This last is the rest of the removal.  I tossed a little humor in there about feed my son Ryan only if we worked for the meal.  Not sure he thought that was too humorous..but I’m his Dad..he has to deal with me.  🙂

http://s299.photobucket.com/albums/mm296/timsweet2200/?action=view&current=MVI_6877.flv

Again, sorry these take you out of the site, I will work on this for the next video uploads.

Thanks for reading.

Tim

Reminder:  PROJECT CAR CONTEST..GET YOU PROJECTS IN!!!!

70 Mustang Dash Replacement – Removal

So the process was fairly straight forward.  Only thing not obvious was the removal of two trim pieces that hid the front bracket.     

Philips screw..wow how ugly was that old dash???

Top screw removal

There were 3 philips screws along the dash next to the windshield.  A nice long screw driver worked nicely.  The holes in the dash cover for the screw were pretty deteriorated, but it was good do know that the dash was really metal covered with the padded vinyl so the screw would hold forever.     

passenger side screws – remove and done!

There were 4 more screw on the passenger’s side.  Now if this were a Mach I it would have a clock located there, but instead there is just a plastic panel.  You could actually place a LCD monitor there for  DVD player.   The panel is below:     

passenger’s Side Panel

The next set of two screws that needed to come up were located above the radio.   These were a bit awkward to remove. But they weren’t philips screws..that pieced together with what we found after taking the dash pad out led to a conclusion of…well I’ll hold off mentioning that until I give you the other piece.      

Arrows show the position of the two screws

After removing these two “non-philips” screws (flat) the dash pad would lean forward and you’d think it would pop right off …but nope!!!  The next photos show why.     

Dash Pad leaning forward.

Additional Trim piece that needed to be removed.

One screw and off it came.

Caption is wrong here the side screw was removed but there was still one below.     

Bottom screw had to just be loosened and the pieces sliped off

One this pieces of trim was removed you can see the screw/bolt that need to be removed.     

Not a great pic..but you get the idea.

One on each side and the dash pad was ready to go.  Check out the videos.  If the videos don’t work..let me know.     

I enlisted the help of my son Ryan.  He was over for dinner and he lent me hand, so I could film as well.    

This first video shows us discovering the front brace hidden under the trim piece.     

  

Here is the backside of dash pad.     

The paper tag on the bottom of the dash pad.

Reading that you can see the date of 1972 on the tag. Since the Mustang is a 1970, the date doesn’t make sense. Adding that the screws near the radio that don’t match (straight vs. philip for the rest) I wondering if the dash wasn’t replaced.  The original owners didn’t mention it, but there was no real reason too.  This could mean that the dash was replaced with what appears to be NOS (new old stock) (from 1972)..that’s a possibility.  I’ll do some more research just to find out.     

The last few pics are of the other markings.     

The two eights – one upper in maker and the one in the glue.

Parts code perhaps 3 24 (d) 2

Sorry..that one’s upside down. 🙂     

The original Ford speaker.     

Speaker with part number.

So what’s next?  I’ll check out the wiring and pull the gages if I need to for repair (although all the gages are working fine). Oh..yeah..do a bulb replacement.     

More to come     

Thanks for reading.     

Tim

1970 Mustang Dash Replacement – Old one is out!!

Spend the last part of today taking the dash out of the Mustang.  It went very smoothly.

I was originally worried about rust up near the windshield.  But a quick check showed nothing major.  I’ll be giving it a good look tomorrow.

I still have to go through the videos and pics, so I’ll post them up late this evening or tomorrow.

Stay tuned.

Thanks for reading.

Tim

Wrenchin’ Tip Restoring emblems 03/18/2010

Many of our cars have worn out emblems that were once painted…Ok..I’m a lucky average guy…the Mustang’s emblems are all chrome and my Corvettes are mostly plastic.  

But what about some those that need painting.  Look for a flow  pencil.  

Flow Pencil for paint your emblems.

 

These are pretty reasonable and make painting small areas a bit easier.  

Thanks for reading

Project Car Contest

Don’t forget to get your entry in for the Project car of the Week/Month.

$100.00 Gift card to an online Auto Parts site, like Summit Racing.

Project Car Of the Week and Month

I’ve been think about doing this but the rules seem a bit tough to come up with.  But I’ll give this a try.

I’m looking for some project car posts from the readers. Your projects.  Anything from a huge wreck of car project to something smaller (bigger then an oil change).  It has to be your car and you are doing “some” of the work on it. That the only hard and fast rule.

I’ll need a couple photos and some brief details.   You can post them up here or find me on Facebook and post the them up or email them to me (timsweet@cox.net).  I’ll post them here and then on my website (www.tucsoncarevents.com) for everyone to look at.

If I get enough entries I’m pick a car of the week the week and then out of the we’ll vote on the car of the month (if I don’t get votes posted up I’ll have one of my regular readers pick it.  The winner the car of the month gets a $100.00 online gift card as an auto parts dealer (Summit Racing or even on tailored to your car).  Simple as that.

So let’s get started. Remember anything from a total wreck to just a transmission swap, body work, paint, interior upgrade, hood swap.  That all works.  Sorry Pdawg giving Burt a bath and vac isn’t going to cut it (but he could use one!!!…just kidding).  It doesn’t have to be done and I don’t need a before and after, just what you are working on.

I’ll this run until I get at least for to choose from, then we’ll vote.

Note:  If you noticed my site is not commercial, there are no ads, no click through links, no pop ups.  It’s just me type to hear myself type and a few of you reading it.  I like it that way.

Thanks for reading.

Tim

Auto Factoids for 3/14/2010

Happy St. Paddy’s day!!!!

3/15/1960 Mercury Comet is brought to dealership windows.

3/17/1949 Porsche appears as the Geneva Auto Show and Gottlibe Daimler born in Germany in 1834.

3/18  a couple of notable birthdays.  Andy Grenatelli was born in Dallas (1923) and a little bit before that Ruddy Diesel was born in France in 1858.  Ok..Rudolf ….only close friends were allowed to call him Ruddy.  Guess what Ruddy is famous for?  

Thanks for reading.

Tim

Wrenchin’ Tip – Candle Wax Bolt Removal – 03/14/10

Follow the steps and you’ll be able to remove those rusted exhaust bolts and it makes using an easy out on broke bolts…um…well… easier!!!!

1.  Heat the bolt or stud with a torch errrkkk….”Yo…us averaged guys don’t have a torch set!!!!”  Yeah, I know…I use a regular propane torch from ACE Hardware.  ….errkkk  Double nut the studs.

2. Once it hot…doesn’t have to be glowing red, touch a candle to it, until there is wax penetrated between the threads.

3. Remove the bold or apply the easy out and you are home free.

If you have a tip, post it here in a comment.

Thanks for reading.

Tim

Project update 70 Mustang

Dallas Mustang has just shipped my new dash-board for the Mustang.  Be here next week, should start the replacement shortly there after.

Tim

Muscle Car Peeves

Ok, I’ve been wanting to do this for a while.  I have a couple of muscle cars and cars that aren’t but get “dressed up” like muscle car peeves.

So here are three right off the bat.

1.  Don’t put Yanko strips on your 2003 Dodge Neon.  It doesn’t look right, and you aren’t fooling anyone.

2.  I have nothing against body kits added to a car.  I, personally, wouldn’t do it to the two I have, but I’ve seen some pretty nice jobs done on Corvettes, especially.  I’ve even seen a lot of imports that look good with body kits.  But here’s my peeve, don’t put them on the car if you aren’t going to paint them the right way.  Save up the cash and get it all done at once.  And one more note on body kits, why would you want to take your Honda Accord and make it look like a 1946 pickup truck?  (OK, I’ve never seen one, but you know what I mean).

3.  I recently saw a 1970-something Camaro, mounted on the frame of a raised Chevy pickup…almost monster truck size.  Why people…WHY???!!!

Okay, there are a couple of mine muscle car want-ta-be peeves.

Post up some of yours. Come on, I know you’ve got them!!!!!

Thanks for reading.

Tim