Category Archives: Car Restoration

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Wrap Up

By | | , , , , , , , , , , ,
1 Comment

So you can grab a couple more tips for Valve Cover Gaskets installation and you get to hear BeepBeep running like a top….love that engine music!!!


Some great tips and one more project down for Bill and BeepBeep!!

Coming up next an update and #ProjectSportsRoof and BeepBeep gets tachy (get it?….not Tacky but Tachy!!!)

Thanks for reading.
Tim

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part II

By | | , , , , , , , , , , , , ,
Leave a comment

Bill gives some tips on cleaning up the valve covers and tries valve cover studs.


Wrap up of the valve cover gasket replacement is up next.

Thank for reading.

Tim

#ProjectBeepBeep

 

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn. More coming up …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted. Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

 

ProjectBeepBeep – 68 Road Runner Valve Cover Gaskets Part 1

By | | , , , , , , , , , , , , ,
Leave a comment

Continue following Bill’s journey to a “Leak Free MOPAR” for his 1968 Road Runner. #ProjectBeepBeep

Wild E. Coyote is back!!!  Apparently he’s been working at Summit Racing!!!!

BeepBeep is getting some new valve cover gaskets!!!!  But will that stop the leaking?!?!?!?!

 




 

More coming up.

Thanks for reading/viewing.

 

Tim

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …

Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …

Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …

 

 

Project BeepBeep – Oil Pan Gasket Part II

By | | , , , , , ,
1 Comment

Bill finds that he needs to drop the center link on is 68 Road Runner to remove his oil pan. Check out the details:


The we have more coming up on this mini-project.

Thanks for reading

Tim

#ProjectBeepBeep

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …

73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep). However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – Oil Pan Gasket Part I

By | | , , , , , , ,
Leave a comment

Welcome back to AGCR.  While I’m hoping that #ProjectSporsRoof get make to my driveway this week, Bill it taking on the old adage “Old Car Leak”.

First up for #ProjectBeepBeep (Bill’s beautiful 68 Road Runner) oil pan gasket.

 

 

Here are the box-end wrenches, I mentioned in the caption.

 

More on #ProjectBeepBeep coming up.

Thanks for reading.

Tim

 

ProjectBeepBeep

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Project BeepBeep Get’s Even Cooler – Part Two

By | | , , , , ,
1 Comment

Welcome back!!!

After finding a leak in the radiator, Bill decided to replace the it with an after market unit.

Here is Part Two of the process.

 


More coming up with Bill’s warp up of the radiator swap for his 1968 Road Runner!!!

 

Thank for reading.

Tim

#ProjectBeepBeep

#ProjectSportsRoof

 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – 68 RoadRunner – Body Bumpers Kit

Bill takes a look at MOPAR Body Bumper Kit for #ProjectBeepBeep and shows a common mistake made when a car is painted.   Bill is correct that the bumper are painted over show an oversight that might just tank the value of your car. I grew up working in my Dad’s body …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner. Did I say this is the final chapter?   Well….     Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend …

Project BeepBeep Get’s Even Cooler – Part One

By | | , , , , , , , ,
1 Comment

Welcome back to Average Guys Restoration.   It’s been a while since I’ve been able to get you some updates on Bill’s beautiful 1968 Road Runner and Bill’s as tackled a few projects.

Just recently he found a leak in the radiator and he documented the mini project.  Here is part one:

 


I have more coming up on the 68 Mopar and #ProjectSportsRoof!!!

Thanks for reading.
Tim
 

68 Road Runner Gets it’s Beep Beep back!!

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general? Either way Bill tackles the problem. Here’s a shot of the horn.   More coming up …
Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …

 

68 Road Runner Gets it’s Beep Beep back!!

By | | , , , , , , , , , , , ,
Leave a comment

While trying to warn a real life coyote of his ‘rapid’ approach, Bill’s 1968 Road Runner (#ProjectBeepBeep) failed to  issue the famous BeepBeep, or was that just part the car’s instinctive DNA based response to coyotes in general?

Either way Bill tackles the problem.


Here’s a shot of the horn.

 

More coming up on #ProjectBeepBeep and #ProjectSportsRoof.

Thanks for following our projects and find us on FaceBook @ www.facebook.com/AGCarRestoration/

Tim

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …

Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …

Project BeepBeep 68 Road Runner – Fender Brace Repair

By | | , , , , , , , , , ,
Leave a comment

Welcome back to #ProjectBeepBeep, Bill’s 1968 Road Runner.  Bill has been moving long with small projects on BeepBeep and I’m try to play catch up with will all my blogging.

While going over his car with magnifying glass Bill found a crack in one of the inner fender well brace.  Over time this can cause issues.  Here’s how the fix went.



Ok, so often when you are working on a project it, recording it has to take a back seat so it doesn’t slow progress and in this case doesn’t take up extra time when a friend is lending a hand.

After the welding there was a little bit of heat damage that needed to be tended too.  Check out the wrap up of this project:

 


 

Thanks for following along.  There will be more coming up.

 

Tim

 

 

Project BeepBeep 68 Road Runner – Up Close

By | | , , , , , ,
2 Comments

So it’s been a while since Bill started his hunt for a MOPAR.  Following along his journey and offering my 2 cents whenever he called for it was fun and finally after spending hours editing video and posting up projects, I got a chance to sit behind the wheel of BeepBeep.

Thanks Bill for the seat time – now how about handing over the keys for a spin?

 

The car is beautiful and no matter how good the camera guy is, the rare paint color has to be seen in person!!!

So grab the next  few post and see what Bill’s been up to with #ProjectBeepBeep.

 

Thanks for following along.

 

Tim

Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …