1967 Olds F-85 Club Coupe Restoration

I bumped in to Bill Holtzclaw from Cartersville, Georgia, virtually (Facebook) and he shared a few pics and some detail on his restoration of a 1967 Olds F-85.

Bill's F85

“I am doing a full, frame-off restoration on this 1967 F-85 Club Coupe. It has a convertible frame, 442 suspension, steel crank 330, .030 over with W-31 cam and 2” intake valves, close ratio Muncie 4 speed and heavy duty 3.91 posi rear. It is a radio delete, heater delete, carpet delete car with the factory cloth and vinyl interior. The drive train is built and the chassis is being assembled. The interior is done, the chrome and bright work is done. Next, we’ll pull the body and put it on a rotisserie. It will be two-tone Crystal and Midnight Blue.”

“I’ve had a lot of interest in this project from some of the leading Oldsmobile collectors in the country. It is my version of what would have been a 1967 W-31, which was introduced in 1968. All of the parts to build this car back in the day were available as either RPO options or over-the-counter upgrades. The W-30 package was available as an over-the-counter package in 1967. The W-30 cam and the W-31 cam are one in the same, and the OIA kit will work for both small block and big block cars. So, it was a possibility! ”

The upholstery turned out awesome! He used NOS fabric for the seat inserts. The car was a factory carpet delete car with a near-perfect vinyl floor covering. “I cleaned it and had it dyed the color blue (same as dash pad) that I wanted. It looks absolutely brand new! I had seat belts custom made to stock appearance, and the standard steering wheel came out nice, too.”

Check out the vinyl floor covering

“I had the gauges restored by R&M restorations in Greenville, SC. The odometer was re-set to zero.”  The dash bezel was restored by Chrome Tech USA. They repaired the 44 year-old plastic, re-chromed it and then detail painted it. The radio and heater delete plates were purchased from Red Venom Enterprises. “They only make the radio plate, so I purchased two and trimmed one to fit the heater control panel and the PRNDL panel. ”

Bill did the polishing himself

He installed a Sunpro Mini Tach in place of the factory clock. Looks like it came from the factory that way!

Great Job - Bill!!

 

Final Product

 

 

Bill is also the owner of a 1967 Oldsmobile F-85 Town Sedan with “Police Apprehender” package.  It has the HiPo 330/320 hp, Heavy Duty Jetaway and 442 suspension upgrades.

Nice!!!

Might be why he’s known as OldsMoBill.  “I am also known as the “Oldsmobile Police”!” Bill states.

Bill, I hope you check back with your status from time to time and thank you for sharing.

Thanks for reading.

Tim

Cars You Never Heard Of! Part 3

I want to cover two more cars in this part.  The first will be the TVR S3..?? ..yeah…me too!  The second will the Caterham Seven.

TVR S3 was put up against the Triumph TR4 and frankly there is nothing I know about a TVR S3..so here we go.

TVR S3 C

TVR engineering started back in England in 1947 with the first TVR being produced in 1949.  Here’s the 2nd TVR built:

#2 TVR

Through out its history it used all types of engines include the Ford Kent engines and even a Buick engine  (3.5 litre Rover V8).

The S series was produced between 1986 – 1994.  The  TVR in this article had steel spaceframe chassis and a fiberglass body.  The engine was an iron, overhead valve, 2936cc 12v V6 with electronic fuel injection.  This power plant cranked out 168 hp and 170 lbft of torque.  The suspension was an independent double wishbone with rack and pinion steering.  This all combined to let the car reach its top speed of 135 mph.

In the comparison, the TVR S3 beat out the Triumph TR4 in Driving, Practicality, Character, Value and Usability 42 to 32.  The price of the TVR S3 is about 4000 Euros with the Triumph at 13,000 Euros.

The company was sold to a Russian buyer in 2004 and after a not so great start the company halted production.

For a full history on the TVR – check out  http://www.tvrsseries.com/

Next up is the Caterham 7:

Caterham Seven

The Caterham Seven is a kit car – you can still buy and build them today. Interesting enough it started out as the Lotus Six.  The next version was the Lotus Seven, however Lotus dropped the production and Catherham purchased the rights to build the kits.  The components are flexible with such pieces as Ford axles and de Dion-axles being used.  The engines used is very expansive  from the  Lotus Twin Cam engine to  Ford’s cross flow engines.  Even Cosworth BDRs appeared around 1983, in 1600 cc 140 bhp (104 kW) form, followed by 1700 cc 150 bhp (112 kW) versions three years later.  In the ’90’s the  common  engine had become the 2 litre Vauxhall HPC, as fitted to the Vauxhall Calibra, putting out 165—175 bhp.  Motor cycle engines have been also used with the likes of the GSXR1300 engine used in the Suzuki and the Honda CBR1100 engine.

These are favorites for the SCCA and other grass-roots racing.

Thanks for reading.

Tim.

Cars You Never Heard Of! Part 2

Thanks for all the comments and emails on the Part 1 of the Cars You Never Heard Of.

Thought I’d follow it up with the Panther Kallista.   This stems from the same article  in  “Classic and Sport Car” a UK publication.  The article pitted  pricey European cars against less expensive cars and rated them.  It’s over all theme was “See you can get this close to the expensive cars, for less.”

 

1985 Panther Kallista

Kallista was the product of the Panther Car Company and they were built between 1980 and 1990, actually coming on the market in about 1982.  The were a box chassis with an aluminum body.  The engine that was first used was Fords 2.8 V6 which cranked out 2792 cc from its 12v configuration.  The electronic fuel injection helped it deliver 150 hp and 159 lb ft of torque. Top speed was about 120 mph with the help of the 5 speed manual transmission.

It had an independent wishbone suspension, rigid axle, rack and pinion steering with disc brakes in the front and drums in the rear.

In the article Kallista was compared against the Morgan Plus 8 which you can purchase now days for about 35,000 British Pounds (about $70k US) compared to the collectors price of 7,000 BP ($14k US).  In that contest comparing Driving, Practicality, Character, Value and Usability the Morgan was judged with a total of 37 points and the Panther Kallista end up with 35.

I did find one on Ebay with a few days still to go with a current bid of just over $4k.  It’s an 1986, 4 cylinder – not a V6.

Thanks for reading.

Tim

Cars You Never Heard Of! Part 1

Of course I spend a lot of time reading and again a lot of that is two or three-dimensional, although my wife says it’s a single dimension.  She sees just “CARS”  I see muscle cars, sedans (that I want to turn in to muscle cars), exotic cars and even some European cars.  That’s multi-dimensional, don’t you think?  I gained a little interest in them when I was a kid and my Dad surprised my Mother with a 60’ish MGB – mainly I learned that unless you wanted to fix ’em a lot…stay a way!!!

I gained a little more familiarization with another brand when I was in college.   I had my license suspended….you can figure out why…so don’t make me say ‘too many speeding tickets”, ok?  Thanks.  So it was only about a mile or so walk to the campus from where I stayed, but if you are from one of the colder States, like northern New York, then you’d know that a morning jaunt on  a Dec. morning is ‘nippy” to say the least.  So I would catch a ride with a friend.  He drove the one of the coolest cars I had ridden.  It was a Citroen. Similar to this one:

It had the coolest suspension that would raise when you started it and lower when you turned it off.

My point being that there is another dimension to my reading – European cars.  But I am in no way any kind of expert with any of them – although when I lived in Germany, I drove a very old European Ford Escort.  That car was horrible!!!! However, it got me round, even when the upper part of the seat frame broke and the only way to drive it was by holding yourself forward using the steering wheel else the seat back, because it leaned so much, should dump you in the back seat.  Last  year I signed up for..please kneel…”HEMMINGS”… thank you….you may relax now… SPORTS & EXOTIC CAR magazine – some great articles and I enjoy Mike’s and Richard’s writings. Geezze, this is a long way around to the point that I picked up a copy of Classic & Sports Car magazine – UK produced – the other day.

In this was a series of articles that pitted 4 pair of cars against each other.  One car in each pair was an expensive classic brand/model and the other was relatively inexpensive newer brand/model.  Two things dawned on me, one was,”Hey, I’ve never heard of a Reliant Scimitar SS1 or a Panther Kallista.”   The  second thing was, “Hey, have never heard of any of these cars!”   Normally if  I have just one of these realizations – I won’t read the article… nope not interested…. but this time I did.

And now I need to know a little about these cars and I know you do to….all three of my readers!!!  So we’ll take a look at  the Panther Kallista and the  Caterham Seven and the TVR S3 and the Reliant Scimitar SS1.

First up is the Reliant Scimitar SS1.

This car (at about 3000 British Pounds  – $6000 USD) was being compared to the Lotus Elan (at 16000 British Pounds or about $32,000 USD).  Here is what it looks like:

Reliant Scimitar SS1

Not bad-looking!!!!

These cars were made from 1986 to 1990, however the Scimitar  actually arrived on the scene in 1964 with a Ford straight 6 cylinder as the power plant.  These more recent models  had a spaceframe chassis and fiberglass body, an iron block, alloy heads, SOHC 1809 cc, 8 valve 4.  It also sported a Garrett T2 Turbo with electronic multi-port fuel injection system.  This allowed it to  lay out 140 HP and 141 lb ft of torque and reach a top speed of 128 mph and it only weighted 1969 lbs.

They sported a 5 speed manual transmission, rack and pinion steering, double wishbone independent suspension and disks breaks.

Just to give you some closure, it was compared to the Lotus Elan where it scored 2 points less than the Lotus (38 to 40) in Driving, Practicality, Character, Value and Usability.

Any one out there have one of these?  Know anyone that has one?  If so drop a comment and pic.

Thanks for reading.

Tim

When New Technology Meets Old Cars

When you work with and/or drive classic cars there is a never ending battle between old school and technology. Do I leave the points and condenser in or do I go all electronic? Do I update the suspension with coil-overs or go with stock suspension? Upgrade the interior to cloth or go with the vinyl? Many of us face those battles all the time. But there’s one clash between old and new that we just can’t to anything about and that is when new non-car technology clashes with old cars.

Back in ancient times the man went out to gather or kill something to bring home for dinner. That hasn’t changed much, especially in my household. Every week I strike out into the jungle to visit the local gatherers’ spot and cart home something for dinner. The only killing going on is my checking account balance.

Today was the day for our weekly shopping, so I fired up the ’70 Stang and headed out, ready for the hunt. After I was done scouting for “sales” and had enough provisions to last seven moons, the clerk (oh, they don’t call them that anymore…’associate’ is the correct term) took my hard earned provisions(HEY!!!..its tough shopping at the mega grocery – carts speeding around like herds of prehistoric lizards, tar pits of jelly on the floor, ill tempered rival tribes in the gourmet isle…yeah…it’s tough!!), stuffed them in to about 20 plastic bags and dumped it all into a cart. On the way out of the store a couple of clerks….excuse me…associates…said have a ‘nice day’ and ‘thank you’, as I tried to push the squared wheeled cart to the parking lot and my car.

 

As I popped open the trunk on the Mustang, I remembered the floor of this cavernous opening is covered with the new vinyl (original material) I installed a few months back and nothing else (I don’t carry a spare for drag strip purposes and it wouldn’t work with the tire size anyway). I looked at the contents of the squared wheeled cart and realized that by the time I got home, my gatherings will be all over the place, even if I didn’t drive like I normally do. If I tied them shut, the bags are still going slide everywhere, including into the quarter panel wells, creating a dripping plastic bag full of wine that just moments ago were grapes.

My next option was putting the bags inside, on the vinyl bench seat in the rear and the on front bucket set. Still the vinyl was going to let everything slide side to side and drop down on the floor.

 

Then I remembered back to when I shopped with my mother as a kid and the vinyl seats in our old Chevy Biscayne. The saving grace there were the old school paper bags that stood up straight and were packed heavy to stay in place. Their square shape allowed for the use of effective load master techniques that kept them on the seat or upright in the trunk. Then I thought,”I should have gone with the cloth over the vinyl.”

Thanks for reading.

Tim

Thanks for reading.

Tim

Muscle car

Muscle car is a term used to refer to a variety of high-performance automobile s The Merriam-Webster dictionary defines muscle cars as ”
American Muscle Car

about muscle cars . Each episode provides a timeline of each vehicle’s history beginning with its first year of production to its most

It Doesn’t Matter what you Drive…

…if you  love it.

One of my readers sent me the video below.  It’s the second in a series of 3 of a California K-Car club, headed out for car-a-van.  Now generally the Chrysler K-Car was and is a but of many jokes.  It wasn’t their best plan but these cars have a following.

I’ve gone on similar runs with my Vette and Mustang, same amount of planning, etc, ( we just get there a ‘bit’ faster –  :^P).   This video show that it’s true…It doesn’t matter what you drive…if you love it.
425px;margin:0 auto;”>  [vodpod id=Video.15330551&w=425&h=350&fv=%26rel%3D0%26border%3D0%26]

     KCar Club, posted with vodpod

You guys are rocking with your K-Car enthusiasm.

Thanks for reading.

Tim

Car Production Numbers. They Made How Many? 1928

The Roaring Twentys – a great time in US social and economic history.  1928 things still looked pretty good and no indication of the tough economic times that would lead to the terrible 30’s.

1928 saw 8 car companies fighting it out for market shares.

Chevy lead the way with just over a million units at 1,193,212 cars.  Ford was a distant second with 607,592 vehicles.

Surprisingly Willys-Overland/Whippet were in third with 315,000 (well behind Ford).  Hudson/Essex produced 282,203 for fourth spot with Pontiac/Oakland at fifth with 244,564, Buick was next with 221,758.  Chrysler and Nash grabbed sixth and seventh place respectively with 160,670 and 138,137.

Notes for 1928:

– Chrysler was getting its new brand ready for the next year – the DeStoto.

– Ford business coupes came with a rubberized roof.

– Chevy produced it 5 millionth car

– It was a record sales year for Essex.

1928 Essex Sedan

1928 Nash Special 6 Cabriolet

 

 

Lemons, Lemonade, Life and Project Cars

No this isn’t a about purchasing a junker car.

This is just an update.

I’ve been preoccupied the last few days I haven’t kept up with my articles.  Since this is the Average Guy’s..etc., then you’ll get this next part.

Thing’s happen in life (a.k.a. – Lemons) and you just have to deal with them.  The goal is always make the best of the circumstances (a.k.a. – Lemonade).

Earlier this week I lost my job with the company I worked in for the past six years. This is not  uncommon in these economic times and there are many average car guys and car gals in the same boat.   Many of those people have project cars and these end up being put on the back burner or sadly end up being sold. As car people we all know this happens and hopefully the car goes to good home.  Hold on before anyone drags out their savings and offers to purchase my Mustang – I’m not there yet.  But it will put my major plans for it on hold for a bit, which is a darn shame, because now I seem to have extra time on my hands to accomplish all those mod, not true a week ago.

So for the better part of the past week I’ve been setting up my job hunting network and getting it in motion.  Now it time to wait it out and see what pops up.  In the meantime I’ll have more time for writing and doing the little left over projects on the Mustang.  I still have the passenger’s seat to re-upholster and the front air dam to put on (I’ve had that in the box for years).  I can install  the polished aluminum alternator bracket I worked so hard on and have yet to install.

And……. I am project managing the restoration of a 1975 Standard VW beetle – pro bono. Here she is:

1975 VW Standard Bug - New Project.

More to come on that.

So unless you are Jay Leno (I hate that guy!!! – not really,  I’m just jealous – I want him to hire me to keep his cars driven and shiny and search out more cars for him..hey..there’s an idea!!!! “Dear Mr. Leno, I’m a car guy and I currently find myself with some  free time so I’m applying for…..”)   you dealt with circumstances like job loss or lack of funds to finish or keep that project collector car.  But remember you can take it slow on projects – it’s OK to slow down and if you have to give up that beautiful machine, keep the memories and there is always tomorrow and another car in your future  –  you have to believe that and work toward it.

Thanks for reading.

Tim

The Marauder

I like off –beat cars. By that I mean, the ones nobody thinks about immediately.  Some of those are cars like, Studebakers, Edsels, and Mercurys.

A few years ago, actually shortly after we moved to Tucson, AZ., I was at the local Safeway and I saw this black car moving through the
parking lot.  I was on foot and I hurried to the end of the parking row to see if I could catch the manufacturer and
model.   To my surprise that sports-roof-like, long black car was a Mercury Marauder!!  It was beautiful.  I’m still not sure what
year it was but I believe it was a 1969 and possibly an X-100, but I can’t be sure.

'69 Marauder

I’m not totally unfamiliar with Mercury’s, having lived with grandparents who  for years would only buy
that Ford brand – mainly the Marques and other 4 door models. Frankly back then I wasn’t all that impressed.
But the Marauder, like the Cougar, wasn’t your grandparent’s car!

So coming up is my write-up on the Mercury Marauder.

Thanks for reading

Tim

Car Production Numbers. They Made How Many? 1934

Jump back to 1934 and lets see what the auto makers cold crank out.

Ford was the leader over Chevy but only by 12k cars, 563,921 and 551,191 respectively.

Plymouth was third with 321,171.

Dodge was a distant fourth with 95,011

Hudson/Terraplane produced 85,935

Oldsmobile only 79,814

Pontiac just slightly behind them with 78,859

Buick finished up last with 71,009

What else was going on in 1934:

–  Hudson dropped its six banger

Lincoln put V12’s in all of their cars.  The 414 cid carried a 6.3:1 compression.

– Graham produced the supercharged Custom Eight.

Graham's 1934 Custom Eight

You know I love engines and this Custom Eight is great!!

Thanks for reading

Tim