#ProjectSportsRoof. 73-17. 1973 Mustang Project Sportsroof – Engine Walk-Through. There is a quick walk-through of the 351C tucked between the fenders of the 1973 Mustang Sportsroof. (It took about 5 takes to get this …
#ProjectSportsRoof will be the way I want it, which I haven’t nailed down yet, so suggest way by dropping me a comment (got your crate motor idea swimming around in my head, Bill) and that will happen fast or slow and cost …
Welcome to this weeks Auto Factoids (#AutoFactoids)!!!!
Back in 1977 on Nov. 15 Ford produced it’s 100,000,000. It was a 1978 Ford Fairmont and rolled out of the Mahwah assembly plant in New Jersey.
1955 Ford Mahwah New Jersey Plant
Triple F (Ford Fairmont Futura)
This car was in fact, a fox body, but gets as much respect as a K-Car.
You can understand why that is when you see it in the 4 door configuration
Now the two door wasn’t too bad – still not great!
But, you know me, I think any two door car can be made to look awesome…..
YES!!!!
AND YES!!!
Back in 1906 the man who started one of the largest global car (and motorcycle) companies was born on Nov 17 in Iwata-gun, Japan:
Soichrio
Another millionth for the month of Nov. Back in 1940 Buick produced 278,784 cars (about 70k more than in 1939) one of those was the 4 millionth Buick and it rolled off the line Nov. 17th.
That car was a Buick Super Coupe like this one:
1940 Buick Super Coupe
I’ve been doing these Auto Factoids for years and this next event never fails to make me scratch my head. Yup it’s the death of the Edsel. Killed by Ford on 11/19/1959 BOO HISS
One of the last Edsels – 1960 Edsel Ranger sedan 🙁
Here are your Auto Factoids (#AutoFactoids) for the first week of Nov. 2015. I’m going to call this Packard Week (like Shark Week only on wheels)!!! Here is.
Keep up with this and #ProjectSportsRoof – get the feed.
Thanks for checking back on the 1973 Mustang #ProjectSportsRoof.
The power steering cooler is pictured below. It’s pretty ugly even when cleaned up.
Keeping the Power Steering fluid cool!!
Non-A/C car power steering fluid cooler
Here is a little info from a fellow Mustang owner.
Steering coolers were an option from what I understand. My A/C car did not come with a cooler. I added one to my car later as it was just a simple bolt on.
Originally the extra long return line for the power steering box was U’d on top of the drivers side cowl brace that acted as a primitive cooler before returning back to the pump.
Someone told me that the ‘competition suspension’ option included the variable ratio power steering box and included the power steering cooler. However I have seen cars with the competition suspension option that did not have coolers. The owners claimed it never had one.
There are 2 different coolers one designed to be bolted on A/C cars over the compressor and the one designed for cars without A/C.
Ford had a revision to the return line in later cars, originally the return line was U’d on top of the drivers cowl brace then later they shortened the return line and just left it next to the high pressure line going to the box.
For the variable power steering box there was another power steering pump that had a different tag on it. HBA-CG was used with the variable box and HBA-CF was used with the standard box, nobody knows if the pumps are in fact different or not internally.The variable box was tagged SPA-T or SPA-V. The normal box was SPA-S and SPA-U.
I have a 72 H code originally with a FMX, A/C car, no competition suspension.
As for requiring a different pump, no, not that I am aware of I use standard power steering pump with the cooler, works fine.
Typical hose layouts for the coolers
Power Steering Fluid Coolers Diagrams
I’ve seen a with the cooler painted or powder coated. However, that would severely hamper it’s ability to cool the fluid. They do look better.
Here is the example in an A/C car – unpainted.
Another Mustang owner recommended spraying the cooler with black radiator paint. That should do the trick.
#ProjectSportsRoof will be the way I want it, which I haven’t nailed down yet, so suggest way by dropping me a comment (got your crate motor idea swimming around in my head, Bill) and that will happen fast or slow and cost …
#ProjectSportsRoof will be the way I want it, which I haven’t nailed down yet, so suggest way by dropping me a comment (got your crate motor idea swimming around in my head, Bill) and that will happen fast or slow and cost …
Any diagram I find has the hose vacuum from the Distr going to the Valve assy.
The Valve assy has nothing attached which is located on the front right side next to the alternator on the water pump housing.
The diagram for the 1972 351C shows that instead of going directly to the carb, the hoses from the distributor vacuum run to the Valve Assy. There also seems to be a second line running from the back of the distributor (in the diagram) – but that isn’t very clear.
Any ideas? Clearly the car runs without any of these connected – do I just plug them all?
For the purpose of these series of posts let’s assume that I want to seriously limit the performance and power of #ProjectSportsRoof’s beautiful 351C and restore it back to factory configuration. Now if you are expecting an …
#ProjectSportsRoof. 73-17. 1973 Mustang Project Sportsroof – Engine Walk-Through. There is a quick walk-through of the 351C tucked between the fenders of the 1973 Mustang Sportsroof. (It took about 5 takes to get this …
Most car enthusiasts know that by the 1970’s all cars even ‘former’ muscle cars, were strangled in terms of power by a host of tubes, solenoids and funny looking flat or funnel like space age devices that were responsible for eliminating harmful emissions. In some cases they funneled fumes back in to the engine to be burned and supposedly rendering them less harmful.
When you are restoring a car of this vintage – especially one like my 1973 Mustang that has been sitting around a while, those tubes/hoses are often cracked, dried, split or ends stretched at the least for missing all together.
You have the option to remove all the space ag hardware (depending on the emissions regulations in your area) or replacing it all to restore to factory specifications. For the purpose of these series of posts let’s assume that I want to seriously limit the performance and power of #ProjectSportsRoof’s beautiful 351C and restore it back to factory configuration.
Now if you are expecting an expert run down on the care and feeding of the vacuum system for this project – you aren’t going to get that right up front. Why? Because it’s really not that straight forward at first and I have a few questions.
As I look at the diagrams for the vacuum system on a 1972 351C, I am not seeing anything that matches my set up.
Let me start back of the engine.
There is a solenoid on the back of the manifold (only bolted there) that I think is some diagrams is shown on the opposite side and in the front.
Here’s a better shot.
As you can see it has no power connected nor hoses. Is that the Solenoid Dist vacuum? I think so.
For the 1972 351C. The solenoid is #12 in the diagram –
Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all.
#ProjectSportsRoof. 1973 Mustang – Project SportsRoof – Compression, Rods … Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted …
#ProjectSportsRoof will be the way I want it, which I haven’t nailed down yet, so suggest way by dropping me a comment (got your crate motor idea swimming around in my head, Bill) and that will happen fast or slow and cost …
George Barris, the “King of Kustomizers” best-known today for the original Batmobile of the 1960s TV show, died Thursday at his Encino home. He was 89.
LOS ANGELES — George Barris, who created television’s original Batmobile, along with scores of other beautifully customized, instantly recognizable vehicles that helped define California car culture, has died at age 89. Barris Kustom Industries …
So after inspecting the head further, I noticed a few more reasons to have them reconditioned. Take a look:
Gonna Need some touching up.
As you can see there a lot of rust and old stuff plugging up some of the water passages.
The heads were sent out to a local machine shop run by an old hot rodder.
Here’s a quick video of the valves that were removed. You can see the build up as the oil (from the tappet hole) and the gas was continually ignited by the spark plug.
The good news the heads are back and installed. The bad news in my haste to get the car back together, I forget to get some shots of the completed heads. By the time I realized it was too late to go back.
The Cleveland is running strong, but needs a lot of work on the vacuum system and – I’m thinking of replacing the carb. Send me your on what to replace it with.
Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all.
Next up will be the install Pertronix system and cap and rotor, then plug and wires. Thanks for reading and drop me a note. Tim. #ProjectSportsRoof. projectsportsroof. 1973 Mustang Project SportsRoof – Interior Walk-Through.
![[Image: Vac-14-L_zpsndlzgozn.jpg]](http://s299.photobucket.com/user/timsweet2200/media/Vac-14-L_zpsndlzgozn.jpg.html)
![[Image: Vac-13-L_zpsgbppofla.jpg]](http://s299.photobucket.com/user/timsweet2200/media/Vac-13-L_zpsgbppofla.jpg.html)
![[Image: Vac-31-L_zpsyrpi8chf.jpg]](http://s299.photobucket.com/user/timsweet2200/media/Vac-31-L_zpsyrpi8chf.jpg.html)
![[Image: Vac-21-L_zps2rgxlj0p.jpg]](http://s299.photobucket.com/user/timsweet2200/media/Vac-21-L_zps2rgxlj0p.jpg.html)
![[Image: Vac-23-L_zpscwrovtl4.jpg]](http://s299.photobucket.com/user/timsweet2200/media/Vac-23-L_zpscwrovtl4.jpg.html)
