Barrett-Jackson – Car Art 2

This is one of my favorite photos thus far (with over 600 to look at it’s gonna take a while).

This is my son’s shot of a 1956 BelAir.

 

Bel Air side molding.

 

Thanks for reading.

Tim

Restoring a 1953 Chevy Cop Car!

Whenever I can I like post up a plea for someone doing a restoration that may need some assistance. The Sarasota County Lodge #45 needs assistance with restoring a 1953 patrol car. This car is a ’53 Chevy Bel Air 150.

Here are some details:

1953 Chevy Bel Air 150

 

The Sarasota County Lodge #45 of the Fraternal Order of Police is spearheading a project that will involve the restoration of an antique patrol car. The vehicle will match one that was actually used by the sheriff’s office since the office first purchased patrol cars in 1953. Once the restoration is complete, the vehicle will be donated to the Sarasota County Sheriff’s Office for various public uses.

By reviewing photographs in “From Shield to Star,” a book by retired Sgt. Bob Snell that documents the history of the department, several vehicles were identified by make and model. The first fleet of four vehicles consisted of 1953 Chevrolet Bel Air 150s. The project is being coordinated by FOP #45 Vice-President Kevin Lynch, who is a retired SSO lieutenant. Lynch has overseen the restoration of several emergency vehicles including two fire trucks and a Cadillac ambulance that he currently owns.
Tax-deductible contributions to this project can be sent to The Community Foundation of Sarasota County, P. O. Box 49587, Sarasota, FL 34230-6587, marked for the antique patrol car project.
The FOP is also looking for in-kind services and donations such as labor and supplies needed for the project, and possibly the vehicle itself. Storage space will also be needed for the vehicle as well as initial transportation to Sarasota. Questions can be sent to FOP Lodge #45 at P.O. Box 1488, Englewood, FL 34295-1488 or e-mailed to Lynch at floridafop45@yahoo.com. You may also visit the Lodge #45 website at foplodge45.com.

Thanks for help out.

Tim

 

1970 Mustang – Getting the Boot!!!

Replaces that is, boot as in shifting boot.  (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ?   Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!)

When the 4 speed trans got installed we used the old rubber boot and it did tear.  So I replaced it with a nice leather replacement from Scott Drake.

Ripped Rubber boot

See the boot:

[vodpod id=Video.15992027&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0090.mp4]

Boot Replacement 1, posted with vodpod

Here is a quick look gaping hole:

[vodpod id=Video.15992144&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0089.mp4]

Boot replace2, posted with vodpod

Holes to be drilled:

[vodpod id=Video.15993270&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0091.mp4]

4, posted with vodpod

The chrome plate (well not really chrome) was originally held in place by the last fold of rubber on the boot.  This isn’t possible with the leather replacement so I had to improvise.

[vodpod id=Video.15992323&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0092.mp4]

boot replace 3, posted with vodpod

Installed:

[vodpod id=Video.15992683&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0093.mp4]

Boot Replacement 6, posted with vodpod

 

So the  boot and trim are in stalled, but of course you leave those ugly bolts sticking out.  I originally thought that I would get some chrome bolts to replace, but they aren’t inexpensive as I found out when I replace my 1984 Corvette’s valve cover bolts with chrome…hey..they keep the chrome locked up at the local Ace Hardware!!!  <<>>  So since I still have to replace the carpeting (I could change my mind later about the bolts) I opted for some plastic chrome-like covers – they are actually cover for license plate screws.  Here  are a couple of pics:

One cap on and one off.

 

Both caps on, held in place with a touch of easily removed household rubber silicon glue

 

Thanks for reading.

Tim

Five vehicles from Ron Pratte’s collection set to cross the block at Barrett-Jackson – Hemmings.com


Tucker #1043. Photos courtesy Barrett-Jackson

The big Scottsdale auction week is finally here, now with six companies set to to drop the hammer on literally thousands of collector cars in a mere handful of days. In typical fashion, Barrett-Jackson was the first to usher cars through the stage lights, and it’s here where we’ve been alerted to the probable sale of this 1948 Tucker (chassis #1043) currently owned by none other than noted Barrett-Jackson attendee and enthusiastic car collector Ron Pratte.

Specific details about the Tucker are lacking, other than mention of its restoration, on Barrett-Jackson’s auction description. And we use the phrase “probable sale” simply because unlike most of the lots at B-J, the Tucker is listed as having an undisclosed reserve. That said, Mike Schutta of the Tucker Historical Foundation, provided more insight.

This car is very nice and most Tucker fans are keeping a close eye on this auction to see if it will set a new record price for a Tucker. The current record is $1,127,500 paid for Tucker #1045 about 18 months ago. This Tucker is in much better condition.

An interesting tidbit is that Tucker #1043 was used as part of an advertising scheme for a golf driving range in a western suburb of Chicago back in the ’50s. It was painted Tropical Rose and Snowshoe White to match the driving range buildings.

While surfing through the Barrett-Jackson website for more information on the Tucker, we stumbled upon four other Ron Pratte-owned vehicles that will also be offered at Westworld during the weekend, beginning with the car pictured above: the 1947 Bentley Mark VI with coachwork by Franay. The Bentley was last offered for sale by Barrett-Jackson – at no reserve – at their 2006 Palm Beach auction, where the hammer fell at $1,728,000 (including buyer’s premium). At that sale, details of the Bentley were as follows:

4.5 Liter Inline 6 with a four-speed. Coachbuilt by Franay. Magnificent restoration to Pebble Beach Concours d’Elegance winning standards. This is the first major winning Concours d’Elegance car after WWII. Winning the first two major Concours in 1948, back-to-back, on the 12th of June at Enghien and the 17th of June at Bois de Boulogne. Mr. Gudol, the original owner and visionary of the Franay, was an industrialist whose sole purpose was to prove to the world that France was not only back from the rigors of war, but ready to reassert its dominance of haute couture and automotive design elegance. The awards the Franay has won over the decades is proof of his timeless vision. Mr. Gudol, in his wisdom, continued to enhance and advance the performance capacity and design elements of the Franay to push the envelope of an ever improving competitive edge in Concours d’Elegance competition. Mr. Gary Wales, who has shepherded the Franay through over 50 major awards and honors since 1990, has scaled back the number of public appearances so that the car is currently eligible for any and all Concours d’Elegance events.

Like the Tucker, the Franay Bentley touts an undisclosed reserve.

Then there’s Pratte’s 1957 De Soto Adventurer convertible, again with an undisclosed reserve. Oft-repeated generic De Soto history aside, specific details provided by Barrett-Jackson state:

Powered by the famous 345/345hp Hemi V-8 with dual quads, an automatic transmission, push-button shifter on dash, and independent torsion bar front suspension. With the division’s top Hemi V-8 under the hood, the Adventurer was an early muscle car with a set of the most aesthetically pleasing tail fins ever seen on virtually any car.

The only two cars listed by Pratte without a reserve are this pair of 2007 Shelby GT500s, which are to be sold as a pair. Details per the auction site are identical for both Shelbys:

In January 2006 Ron Pratte bought the Ford Motor Company’s newest car, a 2007 Ford Shelby GT500 VIN 00001 that benefited Carroll Shelby’s Children’s Foundation. In the past, Ford reserved the first fifty cars produced for Ford family members and senior executives or by other people on a selective list. Ford was so grateful to Ron for his generosity, they offered him the opportunity to buy two more, VIN 00002 and VIN 00005. While Ron is keeping VIN 00001, he is selling the orange Coupe and matching convertible as a pair. The successful bidder will get both cars for one price. These cars are special in other ways as well, as part of the purchase of VIN 00001 was a trip to the Flat Rock assembly plant where these legendary cars are manufactured. At the end of the tour of the assembly plant, Ron was presented with the keys to VIN 00001, VIN 00002 and VIN 00005 by Carroll Shelby and Carroll autographed all three cars for Ron. Along with his cars were three other 2007 Shelby GT 5000′s, for Carroll Shelby, Steve Davis and Gary Bennett. Ron then threw Ford a curve and said he didn’t want any of these cars shipped by rail to the owners, he wanted them trucked, enclosed, to his facility in Chandler, Arizona, bypassing the traditional dealer delivery and inspections. All of the cars, including Carroll’s personal GT 500, were delivered to the respective owner this way. This is a unique opportunity to own two pieces of Shelby and Ford history.

Barrett-Jackson’s Scottsdale auction started Sunday and will run through this weekend. For more information, visit Barrett-Jackson.com.

I personally love the De Soto.
 
Thanks for reading.
Tim

Engine Line Up – 1973 Ford – Mustangs

The engines for the 1973 Mustangs pretty well with the rest of the matched up the other models engines, but with some minor “tweaks”.

You couldn’t get a Mustang with a 4 cylinder (yet) but you could get with the standard 6.  This was the 250 version, (250 cubic inches of displacement) the bore and stroke was 3.68 x 3.91 also used in the Torino.  Topping it with a single barrel Motocraft carb and coupled with a compression ratio of 8.0:1 gave it a ground pounding horse power rating of 88 (Oh don’t worry, it gets worse in 1974).

302 remained the same for the Mustang and was the standard for the Mach 1.  The 351’s (Cleveland and Windsor were available and they really remained the same as those for the other models.

Now you might be saying, ‘Well Tim, seems like you typed yourself in to a corner here.  Those engines are the same.”  But here is what made the differences  – options!!!

With special intakes, valve springs, dampers, large 4300 D carbs, 2.5 inch diameter dual exhaust outlets and modified cam, you now talking increased breathing and exhaling capacity. Which we all know means…say it with me…..”MORE HORSE POWER!!!!!”   But how much? I’m glad you asked.

The 351 with these types of option produced between 246 and 266 horse power.  The 302 doesn’t show being configured with anything other than the stock options.

1973 351 Cleveland 2 barrel Intake

'73 351 Windsor 4 barrel intake.

Why didn’t they put the 400’s in the Mustang????

Thanks for reading.

Tim

Car Art vs. Car Art

There’s car art (art with cars) and then there’s car art (art on a car).

Here are a couple interesting pieces.

The first is  in Prescott, Az.  Prescott is beautiful city in up-state Arizona where we love to hang out.  It features a beautiful town square that would rival any of them back East.  That square is the venue of some very enjoyable events, include a collector’s car show and an all Corvette show, every year.

Walking a few blocks away from the square is a parking garage with one side depicting an a mural.

 

Mural in Prescott, Az

Notice the cars?

Here’s a close up:

 

Mural in Prescott, Az

 

Great art  work!!!

Let move to the other end of the spectrum.  I’m keeping in mind that “Art” is in the eye of the beholder..nah…that’s not working here!!!

Bisbee, Az is nearly the complete opposite of Prescott, Az.  In fact, it’s even located at the opposite end of Arizona.  Tucked in to the mountains, near the border of Mexico, it is  very interesting mining town, turned tourist town.  Bisbee sits in a time warp stuck between the 1960’s and mid 1970’s.  Gives all the feel of the VW  bus generation with a huge variety of artist’s, art galleries and old mining camp homes built into the side of the mountains.  No..this ain’t the travel channel…so here’s the Art on the Car.

It appears to be a….why YES!!!…it is an El Camino.  Ya..know….I can’t really say any more…you look at it…and give me some feed back!!!!

El Camino - Art'ed out

 

Yup...eactly...WTF!!!

 

Well..ya know....it was cheaper than going to MACCO for a paint job

 

“nough…said”!!!

Thanks for reading.

Tim

Average Guy’s Car Restoration, Mods and Racing – International

This blog is gaining popularity.  It’s being followed on Digg, StumbleUpon, Twitter and the Facebook page.

There are car nuts from 18 different countries hanging out around here.  That’s pretty good for an non-commercial blog.

What’s that mean?  Means I’m going to set it up a bit.  More to come on that.

So thank you all and please submit your pictured and stories and I’ll get them posted up.

Thanks for reading.

Tim

 

$3 Million 1967 Shelby GT500 Super Snake

Posted by on January 15, 2008 – 6 Comments

06d0_3-1

With the upcoming release of the Shelby GT500 Super Snake many people will have an opportunity to put on of these limited edition Shelby’s inside their garage. It’s quite the opposite for the 1967 Shelby GT500 Super Snake as the person who wins this ebay auction for the only 1967 Shelby GT500 Super Snake ever produced will have the ultimate limited edition Mustang. The 1967 Shelby Super Snake sports a 427ci V8 with 520 horsepower, a 170 mph top speed and unique triple stripes. The ebay auction is set to end in a week. Check out the pictures after the fold.

1967 Shelby GT500 Super Snake

0cc7_3.jpg

0e55_3.jpg

06d0_3-1.jpg

09d2_3.jpg

The Rebuild of a Ford 3 Speed Transmission

Coming up will be a series of posts as I rebuild the original 3 speed transmission.  This is the original  3 speed transmission from my 1970 Mustang. I’ve replaced it with a rebuilt 1965 4 speed transmission from a Shelby Mustang. (See that in a post coming up.)

I’ll start the tear down after the Christmas holiday.

Transmission Tag

That cable is the speedometer cable

[vodpod id=Video.15751050&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FMVI_9345.mp4]

Thanks for reading.

Engine Line-UP: Chevy Engines 1971

If you read any of my pieces on Engines, you’ll know that I enjoy learning all I can about the various makers’ details on their features.  I thought that I might start a series that took a year by year approach to what the US automaker build and used in the cars they produced.

So here is the engine line up for the 1971 Chevys.

 

Of course Chevy had the V8’s in 1971, not yet strangled by smog control, as well as 6 cylinders and 4 cylinders.

All of the 6’s were inline (often referred to as straight 6 – for the pistons all being in a straight line configuration) these were 250 cubic inch displacements – (very similar to the Ford 250, with the exception of the Blue upping the compression to 9.1:1 vs Chevy’s 8.5:1).  These were cast iron with hp running about 145 with hydraulic lifter,  and normally topped with a Rochester one barrel carb.  Any car that had a 6 in it had this engine and it was an option with most any Chevy model.

 

1971 Chev Inline Six (this one is in a Chevy Nova)

Next up is the 4 cylinder used exclusively in the Vega (remember those?). They were inline 4’s with Over head Cams, aluminum block (not iron) and managed to displace 140 cubic inches.  The compression ratio was less than they 6 at 8.0:1 with hydraulic lifters and a one barrel carb.

Vega Four Cylinder

There were 3 basic V8 that year the 350, 400 and the 307.

The 350 cid was cast iron with overhead valves and compression ratio of 8.5:1 with an hp of 245 hp when it was topped with a 2 barrel Rochester carb.  These were widely used in the Biscayne, Bel Air, Impala, and Monte Carlo.

The 400 was cast iron as well with matching stats.  However due to the larger bore  (4.125 vs the 4.00 for the 350) and longer stroke (3.75 inches compare to the 350’s 3.48) it was able to push the hp’s up to 255 (umm..seems like a lot of work for 5 hps) when it was topped with the same 2 barrel carb.

The 307 rounds this out  with its cast iron block and over head valves, it to had the compression ratio of 8.5:1 but with a smaller bore and shorter stroke  (3.875 and 3.5 inch)it bu down roughly 200 hp.  The 307 was used in Chevelle, Malibu, Nova and the Camaro.

 

Thanks for reading.

Tim