1956 Bel Air Roadster Project “Open Air” Unveiling SEMA 2012 – Hot Rod Magazine Blog

1956 Bel Air Roadster Project “Open Air” Unveiling SEMA 2012 – Hot Rod Magazine Blog.

1956_BELAIR_ROADSTER_PROJECT_OPEN_AIR

On almost every season of Chop Cut Rebuild, Classic Industries builds an awesome project and 2012 SEMA’s project is no exception. Project “Open Air” is an LSA-powered ’56 Bel Air Roadster (that’s not a misprint, it’s a roadster not a convertible). The entire build will air on Chop Cut Rebuild’s 9th season. The first episode will air mid January.

 

LSA SUPERCHARGED 1956 BEL AIR 650x433 image

 

 

 

It started from a ’56 Bel Air found in a backyard in Compton, California. They got it back to Classic Industries’ shop in Huntington Beach, CA, only to realize that the entire car had started to bow in the middle because of rust. They called upon Art Morrison for a chassis and Real Deal Steel Bodies for a convertible body. Chevrolet Performance supplied the LSA crate engine and 4L85E transmission. Dakota Digital helped out with the gauges and C.A.R.S. Inc. stepped in with the interior.

 

The project was finished only hours before loading it on a trailer to be unveiled at the 2012 SEMA show. The build coincided with Classic Industries’ new tri-five catalog that was introduced April, 2012. Check back later as we will have build photos of project “Open Air.”

 

Performance Parts Pout

Well, I’m officially depressed. No it’s not because of the holidays, or the rapidly approaching  June when I’ll move too  far into the 50’s  to be able to fool myself that I’m just barely 50, nope none of those things.

I’m looking at GM’s (bastards!!) Performance Catalog and all the shiny things in it.  Like the ported LS3 heads, and the LS376 – 525…yes  525 hp in a crate engine, drop in and drive.  I realize two things, I need an older Chevy to play with (or upgrade the C6 Vette) and that I’ll need a second job if I even want to touch any of this stuff and where will I live when the better half finds this stuff laying around the garage? (Tell me you aren’t depressed now?!?!!…It’s ok…admin it!!!)

Note:  It’s gonna get worse… I have the Ford performance parts catalog as well…all I can say is thank GOD!!!  I don’t have a Morpar to drive around….oh….the therapy…bills….!!!  Why, OH Why didn’t I drink the family KoolAide when I was a kid..I would have been able to shun the Fords and Mopars and just be a normal one brand car guy??

There is some awesome stuff the Chevrolet Performance Team is put out, everything from small block crates to LSX monsters, to circle track crate engines.

Over the next few post I’m going to cover a few highlights and a couple unexpected – like engines for the Chevy Cobalt and some V6 engines.  (Have just read some specs for the upcoming 2013 Mustang V6 – I want to see what Chevy’s got.)

In fact let’s start with something off the wall.  Like the 900  V6 Intake for a 4 barrel carb!! What???!!!!  It’s an aluminum high-performance for the 3.8 or 4.3 liter V6.  So go ahead bolt on that 390 cfm carb..oh heck….grab that 600 cfm 4150 and drop it on top.

Chevy's V6 - 4 BBL Intake Manifold - about $265.00 (Part 10134390).

That is not a bad price.  Of course it’s not for all heads, like it  won’t fit the 3800 V6 or the 18 degree heads and you might have add a bump to your hood for clearance!!!

Thanks for reading.

Tim