1970 Mustang – Getting the Boot!!!

Replaces that is, boot as in shifting boot.  (Were you thinking…since I just got back from the Barrett Jackson Auction.. I was considering getting rid of the Stang ?   Nope..but I tell you there were a couple of cars I’d even swap for…that’s for sure!!)

When the 4 speed trans got installed we used the old rubber boot and it did tear.  So I replaced it with a nice leather replacement from Scott Drake.

Ripped Rubber boot

See the boot:

[vodpod id=Video.15992027&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0090.mp4]

Boot Replacement 1, posted with vodpod

Here is a quick look gaping hole:

[vodpod id=Video.15992144&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0089.mp4]

Boot replace2, posted with vodpod

Holes to be drilled:

[vodpod id=Video.15993270&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0091.mp4]

4, posted with vodpod

The chrome plate (well not really chrome) was originally held in place by the last fold of rubber on the boot.  This isn’t possible with the leather replacement so I had to improvise.

[vodpod id=Video.15992323&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0092.mp4]

boot replace 3, posted with vodpod


[vodpod id=Video.15992683&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0093.mp4]

Boot Replacement 6, posted with vodpod


So the  boot and trim are in stalled, but of course you leave those ugly bolts sticking out.  I originally thought that I would get some chrome bolts to replace, but they aren’t inexpensive as I found out when I replace my 1984 Corvette’s valve cover bolts with chrome…hey..they keep the chrome locked up at the local Ace Hardware!!!  <<>>  So since I still have to replace the carpeting (I could change my mind later about the bolts) I opted for some plastic chrome-like covers – they are actually cover for license plate screws.  Here  are a couple of pics:

One cap on and one off.


Both caps on, held in place with a touch of easily removed household rubber silicon glue


Thanks for reading.