Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

Welcome back to the #ProjectBeepBeep.  We are still following Bill’s progress on the front disc brake conversion for his 68 Plymouth Road Runner.

Did I say this is the final chapter?   Well….

 

 



Sometimes during a project you just can’t afford the time to do a video, especially when you have a friend coming by to help out.  Lets have Bill tell you how it all ended:

“I had to call in an expert; fellow I work with is a Mechanical Engineer and used to work as a Porsche/BMW mechanic before and during college. Together we got the wheels on the ground in about two hours. He recommended a last-ditch effort with the brake lines; we tightened all lines until the tube nuts were deformed. Also found an off center flare on one of the brake lines and he had a machine that fabricated the new line. Difficult to bleed; we bled the system 11 times (I counted) and went through lots of brake fluid (almost two quarts).

Took BeepBeep to the MOPAR show at Larry Miller Dodge almost immediately after getting the wheels on the ground!  Car stops on a dime and gives you nine cents change. Don’t miss power assist at all. This car will STOP!

Check it out:


 

I need an alignment next, but otherwise I really have no other problems to report. Everything working; oil PSI is 35 at idle, 55 at running down the road, and temp was a tick under 195F all day long.

Time to enjoy this ride!”

 

Bill,  thanks for the all the video and the tips you given the reader! 

Looking forward to your next ‘little’ project on BeepBeep.

 

Tim

projectbeepbeep

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …
Project BeepBeep – ’68 Road Runner – Drum or Disc – The Decision

1968 Ply Road RunnerProject BeepBeep Welcome back to #ProjectBeepBeep.  Bill is looking at the brakes and gets some professional assistance to help him make a crucial decision.  You know if you’ve got a lot of GO…you need a lot STOP. It not an easy decision to alter a car’s originality, especially …
Project BeepBeep – ’68 Road Runner -Disc Break Conversion Part 2

Thanks for checking back in on #ProjectBeepBeep. Having made the decision to convert the front brakes from shoe to disc Bill gets started with this major project for #ProjectBeepBeep. He went with a kit from Dr. Diff and here’s a brief look at some of the contents.   Nice shiny new rotors!! Spindle …
Project BeepBeep – ’68 RoadRunner – Door Panel Tips

Ready for some more #ProjectBeepBeep?  Bill takes you through a few tips for restoring your B-Body door panels. Take a look:     Great stuff!!!  Thanks Bill!!! Have a few Mopar tips – Post them up or drop me a note @ agcarestoration@cox.net and we get you video/tip posted on the site. Thanks for reading Tim                 Introducing …
Project BeepBeep – 68 RoadRunner – Disc Brake Conversion Part 5 and Some Dash Work

Welcome back to #ProjectBeepBeep. Bill is working on finishing up the brake conversion. Here is a progress update. Note:  I forgot to add the credits for these videos:   Starring Bill B as himself; BeepBeep as ’68 Road Runner; Wild E. Coyote in effigy Camera Production; Mrs. Bill B and SamB Editing Tim …
Project BeepBeep – 68 RoadRunner Dash Update

Welcome back to #ProjectBeepBeep.  Thanks for checking in on the progress of Bill’s 1968 Plymouth Road Runner. If you recall mixed in with some brake updates,  Bill mentioned that he had sent out the circuit board for a restored.  Here is an update on the status of the dash.     Next up an …
Tagged , , , , , , , . Bookmark the permalink.

5 Responses to Project BeepBeep – 68 RoadRunner Disc Brake Conversion – FINAL CHAPTER!

  1. Tim Sweet says:

    From Reddit from ClearedHotSendIt via /r/mopar sent 18 days ago

    “Disc brakes are for cowards” “No airbag, we die like men”

    Some of my favorite bumper stickers!

    contextfull comments (5)reportblock userreply

  2. Bill says:

    Upcoming stuff: ignition system look over, and exhaust leaks addressed!

  3. Tim Sweet says:

    From YouTube: jose Penate
    good work.

  4. Bill says:

    Can you believe it’s finally finished?

Leave a Reply to BillCancel reply