Wrenchin’ Tips – Masking

Having grown up working in my Dad’s body shops, was often given the honorable task of taping (masking) off the areas that weren’t going to get sprayed and areas, like windows and mirrors where you don’t want over-spray landing.   I learned a few tricks that help speed up the process, but more importantly help ensure a good clean paint job.  Removing over-spray is not a fun process.

I’ve tried the machines that merge the paper and the tape, great for straight lines, like the Coca Cola trucks we painted but for tight corners it just doesn’t work.

To save time, which equals a money saver and to get sharp clean lines, outline the areas with thinner tape, 1/4 inch works best.  After that use the tape and paper machine and run that along the previously laid tape.

Here’s one more.

I can’t possibly tell you how much a pain it can be to tape off emblems and name plates and it’s never clean.  Do yourself a big favor, figure out how they are attached to the sheet metal and purchase replacement them.  You know where I’m going… remove the badges and emblems.  That is the only way to do it right.

Clips for my 70 Mustang badges

Thanks for reading.

Tim

A Very Belated Obituary for DeSoto

Another old Detroit plant falls to the wrecking ball.

by Mike Davis on May.26, 2011

The last DeSoto.

The last tangible evidence of one of Detroit’s iconic brands was rapidly disappearing this week as demolition contractors tore down the last of the DeSoto plant, 50 years after Chrysler Corporation discontinued the car line.

Moreover, the Albert-Kahn-designed DeSoto plant on Wyoming Avenue between McGraw Avenue and Ford Road at the western border of Detroit, was the only automobile assembly plant erected in America during the Great Depression.  Chrysler also built a truck plant in the period—but that was it for new auto assembly plants during those tough years.

Until its demise, the DeSoto plant’s huge billboard stood as a nagging competitive symbol above the Ford Freeway (later I-94) that Ford and especially Mercury executives could not help seeing as they headed back and forth from their nearby Dearborn offices to downtown Detroit or their eastside homes.

DeSoto was conceived by Walter P. Chrysler a couple of years after the 1924 introduction of the Chrysler brand, a modernized Maxwell.  Walter P, a former Buick executive, had observed the success of Alfred P. Sloan’s reborn General Motors with its array of medium-priced cars based on “step-up” features.  So he set out to add to the new Chrysler Corporation a low-priced Plymouth to compete with Ford and Chevrolet and a medium-priced DeSoto, matched against Oldsmobile, Buick and the host of successful independents headed by Hudson, Nash, Studebaker and, well, Dodge.

An early rendering of the sprawling DeSoto plant.

DeSoto would be just a cut below the Chrysler, which already was adding larger engines and other features.  In the meantime, New York and Boston bankers were trying to find a buyer for the Dodge Brothers company–acquired from the estate after death of the brothers in 1920–which had a line of cars and light trucks.

Some historians have argued that Chrysler announced the DeSoto to drive down the bankers’ price and willingness to deal for Dodge Brothers.  But eminent academic historian Dr. Charles K. Hyde points out in his 2003 “Riding the Roller Coaster” that DeSoto was already in the works before the bankers appeared in Walter P’s crystal ball.

In any event, in the 12 months after the 1929 DeSoto was put on sale in early August 1928, its sales of 81,065 were the greatest for any new model until the 1960 Ford Falcon came along, even better than the 1938-39 first year of Mercury.

DeSoto almost bit the dust in 1934 when it was saddled with Chrysler’s advanced but unpopular Airflow design.  Conventional Airstream models, rushed into production, saved both brands.

And in 1936, DeSoto essentially became “America’s taxicab” for a decade and a half with a mammoth sale of Skyline (opening roof) models for New York City.  That no doubt helped finance the new plant, announced in 1936 and completed in 1938.  Although all four (or five if you count the on-and-off Imperial) Chrysler Corp. cars could be ordered in long-wheelbase models that made roomy taxis, DeSoto was the notable cab for New York, Washington and Los Angeles until the early 1950s.  (The independent Checker with its Chevrolet components “owned” the Chicago taxi fleet.)

All that remains of the DeSoto plant, which was designed by Albert Kahn, who also designed the vast Ford Rouge assembly complex.

After negotiating acquisition of Dodge in the summer of 1928, Walter P found himself with one too many medium-priced brands.  His main objectives in Dodge were its truck line and manufacturing facilities at Dodge Main in Hamtramck, so the corporate line-up had to be rationalized.  What resulted was three dealer networks: Chrysler-Plymouth, DeSoto-Plymouth and Dodge-Plymouth.  This helped Plymouth compete handily with Ford and Chevy, and slotted DeSoto as a step-up from Dodge in the medium price field.

This stood Chrysler Corporation in good stead in the rush to supply pent-up demand for new cars after World War II.

I fondly remember my father’s shiny new 1948 gunmetal-grey DeSoto Custom four-door sedan with soft green interior trim.  The listed price, not including such options as radio, heater, shiny wheel covers and white-sidewall tires, was $1,892.  Also optional at $121 was the two-pedal “Fluid Drive with Tip Toe shift,” and it became the first automatic (well, really, semi-automatic) transmission car I drove.

You pushed the clutch pedal down to engage the transmission and after that, needed the clutch only to, say, go from reverse to forward or vice versa.  Upshifting from  “low” to “high” was accomplished by lifting your foot off the accelerator pedal briefly.

There was a push button starter button in the lower center of the instrument panel, next to the key slot for the ignition lock.  Unlike manual transmission cars, this DeSoto (and Chryslers) had no “first” position; the “H” pattern instead was like an upside down lower-case “h.”  In those days, all American passenger cars had column-mounted shifters.

However, as a high schooler, I soon discovered—or learned from my peers—that the DeSoto could be started in gear without pushing in the clutch, and that if you put the transmission lever in the bottom upper, or “second” position, it engaged a sort of extra low gear which provided startling (for the time) acceleration from a dead stop.  Then you could upshift by lifting your foot briefly off the accelerator.  Despite a modest 236.6-cid, 109-hp flathead Six, it flew, surprising many an ambitious amateur street drag-racer thinking he was facing off against a slush-o-matic Fluid Drive.  This was all well and good for my reputation until the family doctor spotted me challenging a Terraplane and ratted me out to my father, ending in my clipped wings.

So I have a soft spot in my heart for DeSoto, though I never owned one.

The 1948 DeSoto owned by author Mike Davis’ father.

DeSoto’s best sales year was 1953, when new registrations totaled 122,342, or 2.13% of the US market.  Ultimately it became another victim of the intense sales battle between Ford and General Motors in the mid 1950s.  Buick 1955 sales actually edged out Plymouth for Number Three position.  1952’s DeSoto Firedome hemi V-8 and 1957’s Forward Look briefly boosted DeSoto fortunes but sales declined rapidly through 1958 (a slump year for the industry) and 1959 until DeSoto’s final 1960 tally of a mere 23,063 cars.  Edsel had folded its short life in November 1959 right after its 1960 models went on sale.

Chrysler management had read the smoke signals and decided to pull the plug on DeSoto.  This involved ending both the DeSoto-Plymouth and Dodge-Plymouth franchises, dualing Plymouth only with Chrysler, and reconstituting bottom series Dodges as low-priced competitors to Ford, Chevy and — Plymouth.

Over its 32 years in the marketplace, more than 2,000,000 DeSotos had been produced, a big number considering the modest size of the American auto market of the time.  The last DeSoto built, on December 30, 1960, was a $3,100 1961 Adventurer two-door hardtop with 361-cid, 265-hp V8 and a 122-inch wheelbase.

But that was also the year the Big Three introduced their new compacts—Falcon, Corvair and Valiant, and the previously well-ordered domestic auto market was never the same again.

And now the newly cleared 29-acre one-time DeSoto plant site is on sale for a measly $2,150,000.  Complete with rail siding and a view of I-94, once known as the Detroit Industrial Highway.  Such a deal.

Thought I’d pass this one on.

Thanks for reading

Tim

NMC – Pace Car Display.

This is a great collection for Indy Pace cars.

[vodpod id=Video.9452167&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FPaceM-9.mp4]

NCM – Swap out in Main Gallery

This is a great show of the main gallery.  In this clip they have just placed the AJ Foyt #8 Corvette on display and are setting up a C6 Grand Sport next to it.

Thanks for reading.

[vodpod id=Video.9084959&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FM-6.mp4]

NCM – Mobil Oil Display

There are some great displays at the museum.  This one is the Mobile Oil service stations.

[vodpod id=Video.9084512&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FM-3.mp4]

NCM – 1962 Corvette Display

One of the  beautiful Vette displays at the Corvette museum.

[vodpod id=Video.9084088&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FM-4.mp4]

NCM Raffle Cars C4 and Owner Pick up

At the entrance. Here are two of the cars that are up for raffling. There is also the a vette you can “try on”. In this clip I stated that the vettes at the end of the building were there for customer to sit. No true. That is where the code R is fulfilled. Code R is for delivery at the NCM. You can view a 1984 C4 in the window.

[vodpod id=Video.9074107&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FM-1.mp4]

Thanks for reading
Tim

Almost Live Corvette Musuem and Assembly Plant

Yes…I’m going to try it again!!!   Weather permitting I’ll be posting from both places, tomorrow 5/16.

Stay tuned.

Thanks for reading.

Engine Mini-Series – Pontiac’s 326 Follow Up

Charles – Thanks for dropping by and giving us some of your insight.

Here is what he provided:

Hi, i’ve never heard of the Chevy reaction in 38 years of studying GM’s history.  Pontiac was violating GM’s rule of limiting cubic inches of cars smaller than full-size to one cubic to every ten pounds of car’s weight, so cars like Pontiac’s Tempest/Le Mans, Buick’s Special/Skylark, Old’s Cutlass/F85, and Chevy’s Chevelle/Malibu were limited to 330 cubic inch displacement. Pontiac marketed the 336 as a 326, and after some time, someone in GM figured out the actual bore and stroke made 336 cid. Pontiac had to change the 336 down to the 326.  Then for 1964, Pontiac (Thank You – John DeLorean) created an option for the Le Mans, the GTO option, since the standard Le Mans engine obeyed the limit rule, there was nothing in the rule saying you couldn’t offer an optional extra cost, bigger engine.  Can you say 389 cid, 348 horsepower ?,  OH YES, turn it on, wind it up, blow it out, GTO.

1964 LeMans GTO Convertible

Thanks for reading.

Tim

Chevy’s 283 – OH WOW – 300 HP in a What?

 So I just can’t let the 283 go.  I will find one,  restore it and hang it from my garage ceiling, umm…yeah..I don’ t think the misses will have a problem with that….ok maybe just store it a corner of the garage..or turn it to a coffee table..yeah……um…no.
Check out his 1966 Corvair with 300 hp 283.
Link is here:  http://www.automobilemag.com/reviews/driven/1012_1966_corvair_corsa/index.html
1966 Corvair Corsa Front Three Quarters In Motion

REVIEWS:

First Drive: 1966 Corvair Corsa

From the December, 2010 issue of Automobile Magazine
By Don Sherman
Photography by A. J. Mueller

The Chevy Corvair’s swing axles and heavy tail are implements of the devil, at least according to Ralph Nader’s Unsafe at Any Speed diatribe. Paul Siano, the creator of the mid-engine Siano Special, doesn’t buy any of that. He has owned, modified, and drag-raced Corvairs for more than half of his seventy years without suffering a single unintended spinout.

Siano bought — brand-new — what began life as a 1966 Corvair Corsa after supercharging a Volkswagen Beetle and owning a ’64 Corvair Monza Spyder convertible. He drove the coupe 50,000 miles before ripping out the stock 180-hp turbo engine.

A vintage Crown Manufacturing kit provided the means of upping the cylinder count and moving the engine from the back porch to the rear seat. That package included a tubular-steel subframe, an engine-to-transaxle adapter plate, a new transmission input gear, cooling-system pipes, a new shift linkage, and two new antiroll bars.

Siano’s prize possession is a rare, experimental, 283-cubic-inch aluminum engine block that General Motors pitched out as scrap. Engine builder Bryce Flinn added a roller cam, aluminum heads, and the induction overkill. Siano fabricated the necessary bits and brackets with an emphasis on minimal weight. He also added four-wheel disc brakes, Minilite wheels, radial tires, and a Ron Davis aluminum radiator.

Siano didn’t partition off his eight-pack of Weber intake trumpets, because he’s a patron of the rolling, reverberating, internal-combustion arts. Living with Webers is not for the meek of heart. When cold, they spit and stumble. When they’re up to operating temperature, they fill the interior with a combustible cloud of reversion gases. Smoking is discouraged.

Headphones are available for those rides when hearing preservation takes precedence over the din of a barely muffled Chevy V-8. Only two things keep the whirring water-pump pulley from biting the occupants’ elbows: the flush bolts that Siano installed in place of hex-head screws and every human’s natural preservation instincts

1966 Corvair Corsa Cylinders

REVIEWS:

First Drive: 1966 Corvair Corsa

|
More Photos
1966 Corvair Corsa Front Three Quarters In Motion
1966 Corvair Corsa Engine

When we drove to the test track, Siano’s homebuilt special revealed evil streaks: quick but heavy steering, vague shift linkage, and a throttle pedal that offers yes and no but very little maybe. However, a few miles were enough to establish an amicable working relationship.

Offered the opportunity to redeem itself, the Siano Special settled into stride to post a reasonably impressive performance report: 0 to 60 mph in 5.2 seconds, the quarter mile in 13.9 seconds at 104 mph, and a top speed of 130 mph. More amazing, the handling balance is excellent, offering just under 0.90 g at the limit of adhesion and only a touch of easily controlled oversteer when the fourteen-inch BFGoodrich Radial T/As finally let go. The cobbled-together chassis held firm over bumps, and the dampers kept body motions nicely controlled throughout the testing gauntlet.

Back in the Corvair’s day, GM fiddled with various mid-engine sports cars, only one of which (the Pontiac Fiero) ever made it to a production line. Leave it to a motivated Corvair enthusiast to demonstrate what can be achieved by adding a couple of cylinders and relocating the engine to a more productive location.

The Specs
Engine: 4.6-liter (283 cu in) OHV V-8, 300 hp (est.)
Weight: 2600 lb
Weight distribution f/r: 44.0/56.0%
Drive: Rear-wheel