ProjectBeepBeep – 1968 Road Runner Update Video 2

Thanks for looking back in on #ProjectBeepBeep

Bill begins the odyssey.
Will he wrangle this Road Runner and show up that old Coyote or will an ACME Anvil be his fate?  Keep up to date by grabbing the RSS feed.

Here is Bill’s latest video


More coming up the ’68 Road Runner including a good video on replacing the vapor barrier in your Mopar car.

 

Thanks for reading.

Tim

’68 Road Runner Dash

 

 

 

 

 

 

Introducing #ProjectBeepBeep – Code H 1968 Road Runner

I’d like you to take a look at one of my constant readers classic muscle car. First let me say that Bill has been an a long quest to find a car to replace this car:   Back in the day. It was a long search with lots of phone calls with many …

Lift Classic Mustangs and Avoid Suspension Damage

How To Chassis Suspension

Lift Classic Mustangs and Avoid Suspension Damage

Lift it Right: Raising classic Mustangs on a lift requires a special tool to avoid shock and strut rod bushing damage

Jerry Heasley
December 6, 2016

Anytime you need work on the suspension on anything under a Mustang you have to lift it in the air, whether on a floor jack or a lift. But what you might not have ever heard is that raising a 1965-1973 Mustang on a regular two-post lift without a support between the upper control arm and the frame rail will damage the shocks and strut rods. There’s no telling how many times over the last 50-odd years of lifting a Mustang for a simple oil change that possibly has broken shock and strut rod bushings. The numbers must be in the millions.

Ford supplied dealers with a factory service tool, which they also used on the assembly line, to support the front suspension. Without this support, lifting the car drops the front suspension down and places all that weight on the front shocks and strut rod bushings. This damage is much more than cosmetic. The car will now be unstable at speed, more or less depending on the severity of the damage. Maybe one gentle lift will not result in visible damage, but with multiple unsupported lifts, the damage gets worse.

Bob Perkins of Perkins Restoration (www.perkinsrestoration.com) showed us how to avoid busting out shock tower and strut rod bushings when raising a Mustang on a conventional, two-post lift—or any lift with side arms.

01. This 1973 Mustang front suspension drops and “hangs free” when raised on a two-post lift. This lift picks up the car with arms at the side for access to the undercarriage.

02. Most of these Ford suspension support tools from the 1960s and 1970s have disappeared. Ford shop manuals instructed mechanics to place this support between the upper arm and the frame side rail. Notice the notch on one end. This original suspension support tool has a Ford part number.

03. Because original support tools are scarce, Bob Perkins has fabricated his own for everyday use. On the left are two supports he made. On the right is an original Ford support tool from the 1960s.

04. This illustration from Ford’s 1965 Mustang shop manual shows where to place the support tool when lifting a Mustang on a lift with side arms. The shock is inside the coil spring on top of the upper control arm.

05. The Perkins-built suspension tool, as seen on this 1973 model, fits between the frame rail (bottom) and the upper control arm under the ball joint. To install, first lift the car enough for the tool to fit.

06. Bob Perkins shows us damage to this shock on a car that was lifted without a support tool. The suspension dropped down and tore the rubber bushings in the top of this original shock.

07. Installing a support tool also protects strut rod bushings from damage.

08. On 1965-1970 Mustangs, the shock bushing at the top is apt to break when the suspension falls without support.

09. Likewise, the shock bushings in the 1971-1973 shock tower will have to absorb the weight of the front suspension if the support tool is not used.

Sources

Perkins Restoration

Juneau, WI 53039
920-696-3788
www.perkinsrestorati…

I thought that was a great article.
Thanks for reading.
Tim
Ford Mustang (first generation) – Wikipedia

The first-generation Ford Mustang was manufactured by Ford from March 1964 until 1973. …… “1973 Mustang Grande Hardtop – Mustang Monthly Magazine”.
1964-1973 Mustang Parts

CJ Pony Parts features 1964-1973 Mustang Parts at amazing prices. FREE shipping is included on most products, no minimum order is required. Find your First …

73 Mustang Lifters Adjustment

Welcome back to #ProjectSportsRoof.  My goal to get the engine by Christmas is in jeopardy, so I need to get cranking on getting it all back together.

There’s been a few set back – like losing a couple of bolts that had to be ordered.  A career change has slowed me down some as well.  But I’d like to have the engine in by Christmas and driving it by the end of Jan. 2017.

So, as my self-imposed deadlines are coming fast, I picked up with the adjusting the lifters.  Here how that looked:

 


These will have to be adjusted several times when after it’s run a bit.

Coming up next I have to put the intake on, carb, distributor, fuel pump, so check back and see the progress. Grab my feed and you’ll get notified when I up date the progress.

Thanks for reading.
Tim

projectsportsroof

1973 Mustang – Engine Bay Work

If you look back at #ProjectSportsRoof post you’ll see the condition engine bay.  During those videos I mentioned that I was going to clean it up and hit it with a rattle can.  Again this isn’t going to be a concours restoration, it’s going to look nice and it’s going …

1973 Mustang Original Invoice and Window Sticker – Marti Auto Works

Oct 22, 2016 I didn’t purchase the window sticker for 1970 Mustang but I did for # ProjectSportsRoof. Check it out: 1973 Mustang SportsRoof Window Sticker.

73 Mustang 351 Cleveland Rebuild – Removal 4 – YouTube

Aug 1, 2016 I’m So close to getting #ProjectSportsRoof engine pulled and starting the tear down.

73 Mustang Heater Box Part 6 – Fiberglass Work

Thanks for checking back in on #ProjectSportsRoof.  If you recall there was a lot of damage to the heater box, but rather than purchase a new one I opted to see if I could repair this original.

As of this post I’ve cleaned up the box and used JB Weld to put the pieces back in place and I’m ready to apply some fiberglass to harden everything up.

Here is a look at the fiberglass work.


What’s coming up next on the heater box work is a good look at the kit that you can buy that has some of the rubber seals, clips and replacement pads for the internal air flow doors.  We are going to install those and but the box back together.  I know you are on the edge of your seat for that one.

Thanks for reading.

Tim

1973 Mustang – Project Sports Roof – Fender Fitment Part II

In these next two videos, you’ll see just how ‘off’ these fenders are in some areas and surprisingly how well they fit in other areas. If you have an experience or a hit for anyone taking on this part of a restoration – drop a comment here and we’ll share them. https://youtu.be/Ga9EHbDpSfg     https://youtu.be/FBKs7EG4kK0   Thanks …
Average Guy’s Car Restorations, Mods, and Racing

I know…it’s a bit of let down moving back to the heater box for # ProjectSportsRoof when the beautiful 351 Cleveland that’s going to power the 73 Mustang is …
351C Removal and tear down – YouTube

Jul 19, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang.

 

Check this Out! Renault uncovers the stunning Trezor concept in Paris

Awesome concept car!!!

The Renault Trezor's single-piece roof lifts for entry and exit

The Renault Trezor’s single-piece roof lifts for entry and exit(Credit: Scott Collie/New Atlas)

The Volkswagen I.D. concept may be as important as the Beetle (according to Volkswagen, anyway), but it’s not the prettiest all-electric concept car in Paris, not by a long shot. A real contender for that title is the Renault Trezor, a gloriously curvy, 350-hp grand tourer with clamshell roof, Formula E-based powertrain and “Multi-Sense” autonomous technologies. If this is what the future looks like, we can’t wait to go there.

The Trezor picks up where Renault left off with the passion-red 2010 DeZir concept in terms of swoopy, show-stopping design. Renault says that in the same way the DeZir influenced the styling elements of future products, like the 2012-introduced Clio and 2015 Kadjar, the Trezor will inform the shape of things to come.

And that’s great news because the Trezor is easily one of the sexiest cars on display in one of the world’s sexiest cities, a city that’s currently playing host to both the 2016 Mondial de L’Automobile and Fashion Week. The Trezor would feel comfortable at either.

As we reported way back in 2010, the DeZir was inspired by “falling in love.” It’s been five years, that love is running deeper than ever and now blossoms into “maturity and commitment” in the Trezor. In other words, the DeZir was red-hot lust embodied, and the Trezor is a stronger, committed relationship (that clearly hasn’t lost a step in the sex and passion departments). It’s all very fitting for a Paris debut.

Like the DeZir, the Trezor is defined by voluptuous front and rear fenders, which come across more smooth and sensual than muscular. The new concept stretches out more dramatically than the DeZir, its long, flowing hood teaming with a roofline that slowly descends to the rear bulge between the fenders.

Renault Trezor

Though still a two-seater, the new, 185-in (4,700 mm) concept is more than a foot and a half (475 mm) longer than its 2010 predecessor and sits on a wheelbase with an extra 7.6 in (194 mm). The 80.6-in (2,048 mm) front and 83-in (2,106 mm) rear tracks work with that wheelbase to grab hold of the road with the custom Continental tires.

Up front, the Trezor is defined by the cavernous side intakes dropping down from the sharp headlamps and the curved indentation created with help from the chin down below. The rear-end design includes a fiber optic lighting fixture with integrated laser light. “Under braking, the torsion and stacking of the optical fibers creates an interesting visual effect and increases the intensity of the light,” Renault syas of the design.

Renault Trezor at the 2016 Paris Motor Show

The low-stance carbon fiber bodywork delivers a slippery drag coefficient of 0.22 and helps keep weight to 3,527-lb (1,600-kg) in conjunction with the carbon monocoque.

The Trezor gives off a first impression of being a full-blown supercar, and word of an F1-influenced powertrain temporarily supports that idea. The electric engine is more modest in output, though, a rear-mounted 349-hp unit derived from the same technology that drove the Renault e.dams car to two Formula E championships. Its 280 lb-ft (380 Nm) of torque help it fire to 62 mph (100 km/h) in four seconds flat.

Renault Trezor

Individual front and rear battery packs help keep the motor spinning and weight distributed evenly. A Formula E-derived energy recovery braking system helps to extend time between mandatory recharges. In place of the usual fuel filler door on a gas vehicle, Renault has an analog battery level indicator, a refreshingly simple alternative to the ubiquitous smartphone app with systems info.

The Trezor looks like the type of sporting GT that you’d look forward to driving from point to point (and points beyond), but it does include Multi-Sense autonomous mode, along with neutral and sport modes. The steering wheel doesn’t tuck away, like in the VW I.D. and other concepts, instead widening out to open up a better view of the dashboard. The newest front passenger can use the digital dash for watching video content, playing games or doing all those other things one would do on any digital display. The exterior lighting pattern changes in autonomous mode as a signal to other road users.

Before driver and passenger start kicking back and watching video content on the dash display, they need to saddle up into the cabin through the lifting single-piece roof/hood. With no doors to open, the driver and passenger straddle the leather-wrapped sides to get in, a throwback to classic race cars. Inside, Renault takes the bucket seat to a new level with its full-wrapping driver and passenger pockets trimmed in warm, supple red leather.

Renault Trezor interior

The wooden dashboard was designed in conjunction with French wooden bicycle company KEIM Cycles, its specially prepared ash wood structure supporting the large L-shaped central OLED UHD touch display and control center and digital instrument panel. The multimedia system automatically recognizes the driver’s smartphone, and apps are exported to the vehicle display for him or her to organize and use as desired.

The red wood of the dashboard extends forward under the hood, wrapping a pair of custom suitcases snugly. Leather straps hold that luggage in place.

The Trezor makes its world debut at the 2016 Paris Motor Show, which opened to the press on Thursday. We pretty much gave up any sliver of hope of production the minute we saw it, but Renault does say the car “previews trends likely to be seen in future Renault models.” So there’s that.

Take a look at the Trezor in action below:


SOURCE: http://newatlas.com/renault-trezor-concept/45688/

Thanks for reading.
Tim

Renault Trezor Concept Official Photos and Info – News – Car and …

The Renault Trezor is an old-fashioned dream car. Read more and see pictures at Car and Driver.
Renault Trezor concept: the EV is the car we prey gets made | British …

2 days ago Renault Trezor concept: Thought EVs were boring? You were half right, but you’ll be completely wrong if this goes into production.

1973 Mustang Gets a Breathing Upgrade – Edelbrock 2750 Performer LB 351-2v

With all the engine work being done it would be a shame to plop that big old iron intake back on top of all that work.

So after some research I selected Edelbrock’s 2750, an intake designed for the V2 351C engine, and set up for a 4bbl carb.

img_20160921_144733226_hdr

img_20160921_144759435_hdr

Ports

 

img_20160921_145018641_top

The weight difference is amazing!!!

Here are the details:
Edelbrock 2750 Performer 351-2V Cleveland Intake Manifold
Part Number: 350-2750
4-bbl Square-Bore Carb Flange (non-EGR)
Idle-5500 rpm

Now I have to pick a carburetor for #ProjectSportsRoof.

What would you use?

Thanks for reading.

Tim

1973 Mustang – Project SportsRoof – Compression, Rods and Heads

Thanks for check in on #ProjectSportsRoof. If you remember a of couple months back, shortly after bringing the ’73 Mustang home, I conducted a compression test on all the cylinders.  The 351C was running rough (to put it mildly) and smoked like a pile of tires on fire (only the smoke …

73 Mustang 351 Cleveland Tear Down Video 7 – Mains and Pistons …

Aug 25, 2016 Welcome back to #ProjectSportsRoof. This the beginning of rebuild of the 351 Cleveland for the 73 Mustang. 73 Mustang 351 Cleveland …

Average Guy’s Car Restorations, Mods, and Racing

Thanks for continuing to follow #ProjectSportsRoof. The 351 Cleveland has been torn down and you’ve seen the major components and their deplorable …

73 Mustang 351C Rebuild – Tear Down’s Final Conclusion

1 day ago Thanks for continuing to follow #ProjectSportsRoof. The 351 Cleveland has been torn down and you’ve seen the major components and their …

 

Parkinglot Spot Light – Lamborghini

Well you don’t see this every day.  Followed him for a bit, hoping that rear door would flop open and drop a Lambo in my lap….no such luck!!!!

#Lamborghini

Automobili Lamborghini S.p.A. is an Italian brand and manufacturer of luxury sports cars and, formerly, SUVs, which is owned by the Volkswagen Group through its subsidiary brand division Audi.
Founder: Ferruccio Lamborghini – I’d like to have a car named after me!!!
Founded: May 1963, Sant’Agata Bolognese, Italy
Customer service: 1 (866) 681-6276   – Number is here in case you wanted to order one or file a complaint
CEO: Stefano Domenicali      – We have beers whenever I’m in Italy – not really.
Latest models: 2016 Lamborghini Aventador, 2016 Lamborghini Huracan   #IWantOne  of each!!!!
Parent organization: Audi

Aventador SV

Aventador SV

Huracan

Huracan

Thanks for reading

Tim

RJS Corvette

I don’t really need a Lambo……but…..

 

 

 

 

 

 

 

 

 

 

 

 

1973 Mustang SportsRoof – Floor Pans Getting To It! – Part Four

Thanks for checking back on #ProjectSportsRoof.   I’m about the finish the cuts and fitting for the  right rear foot-well that was rust all the way!!!!

Final Fit for foot-well.

Final Fit for foot-well.

This video is pretty comprehensive so I’m just going to just let it roll.

 

A couple of things worth noting.  The “flap” what was clearly not going to work and leaving the sheet metal running up the side of the transmission/drive shaft tunnel was going to give too much flex in that panel, as the welds would be pretty high.  It’s important to have that solid because as most must guys and gals know the Mustang of this vintage only have sub-frames which lease the floor as the most important body stabilization part of the car.   I will eventually put sub-frame connectors under this beast.

In case you are wondering what that electrical wiring is to the right of foot-well that is for the seat belt switch which when pressure is applied to the seat bottom there must be a connection completed by the seat-belt male end and female end to turn off the “Seat Belt” light and or buzzer.

I have a lot more coming up on the floor pans so stay tuned!!!!

Thanks for reading.

Tim

1973 Mustang SportsRoof

1973 Mustang SportsRoof

 

 

 

 

 

vintage muscle car | Tumblr

Welcome back to #ProjectSportsRoof. We beginning the actual work on the vacuum system on the projects 351C starting with the valve assembly distributor ( the …

1973 Mustang Sports Roof – Vacuum System Part IV

This will be a longer post as I finish up the vacuum system on #ProjectSportsRoof, the 1973 Mustang Sports Roof.  We have to make a repair, hose to the master cylinder, charcoal filter, and the transmission.

Take a look at the broken vacuum “T”:

 

So from the broken “T” I moved to the master cylinder and then to the transmission and finished off with the charcoal canister.

 

 

One final task to finish up the vacuum system and that is the charcoal canister that is supposed to catch the fumes from the gas tank.

 

Back at the beginning I mentioned that I need to get this done because the Stang was coming due for its renewal and smog check.  Just a couple of days after finishing I planned driving over to the emissions testing facility and I got my renewal notice via email.  Here in AZ you can register you car online after you pass your smog check.   The notices normally tell you that a an emissions test is required.  My said “No Emissions” required!!!!!!!     Well the vacuum system needed tending too anyway and now it’s check off the list.

Thanks for reading

Tim

 

projectsportsroof

auto mod | Tumblr

Jan 7, 2010 Thanks for checking back on #ProjectSportsRoof. Progress is being made and I’d like to finish up these post on the install of the Mach 1 grille …

1973 Mustang – Project Sports Roof – Pertronix Ignitor Update

Well win some and you lose some.  If you’ve seen my other posts related the replacement of the points and condenser for the 351C you’ll notice that I gave conversion high marks.  This was all based on the years of use I got out of the conversion I did on the 1970 Mustang 302 engine.   One install and no problems.

As you know I had the heads rebuilt for the 351C and after re-installing them and all the components (intake, distributor…etc.) the car would not start.  Popping the distributor cap showed why:

Drop me a note if you’ve had a similar experience.

Thanks for reading.

Tim

#ProjectSportsRoof