If you thought the Mustang Stationwagon was Bad?

Why did he just buy a Ranchero???

 

1966 Ford Mustang Mustero

1966 Ford Mustero

By  Zach Bowman RSS feed

Posted Dec 21st 2011 10:00AM

The Ford Mustang has some strange skeletons knocking bones in its closet, including the Mustero. Believe it or not, the Mustang/Ranchero hybrid you see above was actually a Ford-licensed product. The company authorized Beverly Hills Mustang LTD to produce the machines for just two years.At the time, the conversion came carrying a price tag of $6,500. That made the Mustero as expensive as the Shelby Cobra. Needless to say, buyers weren’t exactly lining up with cash in hand for a pint-sized pickup sports car, and only 50 were ever produced, including this well-restored example.

According to the owner, this ’66 Mustero received a complete restoration in the ’80s and has been carefully stored indoors since then. A 289-cubic-inch V8 lurks under the hood, mated to a three-speed manual gearbox. Manual steering and brakes are part of the party as well, so be prepared for a work out when it comes time to wheel this machine through town.

 Thanks for reading.
Tim

1917 Crow Lakester Custom headed to Barrett-Jackson

I’m pretty jazzed to see this car in person.

From Autoblog:

There will be hundreds of collector cars going up for auction at Barrett-Jackson this month, but few will be as interesting as this custom creation nicknamed the “Lockheed Lakester”. The car, registered for road use as a 1917 Crow Lakester Custom, was hand-built from the wing tip tank of a Lockheed Super Constellation and uses a mix of automotive and aircraft parts. Wedged inside the tank is a 1.8-liter turbocharged Hemi four-cylinder mated to a five-speed manual transmission, and the two-person cockpit features gunner seats and an air-speed indicator in lieu of a speedometer.
 

We’ll be bringing you live coverage of Barrett-Jackson later this month, so be sure to check back for more photos of the “Lockheed Lakester” and more in just a few weeks.

 
The Crow Lakester

            

 

I’ll grap some pic and video.

 

Thanks for reading

Tim

 

The rebuilding of a Ford 3 speed manual Transmission

As I mentioned in an earlier post, I’m going to rebuild the old 3 speed transmission that I took out of my ’70 Mustang coup and I’ll do it in stages (average guy, average time to spend on a project…especially one that isn’t going to benefit my cars).  The rebuild kit is on it’s way.

This the first time I’ve attempted this, so who knows how it’s going to go.

First I’m going to give myself a transmission anatomy lesson, which I’ll share here.

In the mean time here are couple of videos.

[vodpod id=Video.15939015&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0086.mp4]

[vodpod id=Video.15939022&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0085.mp4]

[vodpod id=Video.15751050&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FMVI_9345.mp4]

Exciting..HuH?

Thanks for reading

Tim

Shelby Ford Mustang “Eleanor” From Gone In 60 Seconds For Sale!

Perhaps one of the worse movies ever.  Horrible acting and on top that…..” five were totaled out during filming…” (see bel0w)
 
Posted by on January 9, 2012 – 1 Comment

mustang1

Even people who aren’t Mustang enthusiasts know the name Eleanor as it became a household name after the release of the remake Gone in 60 Seconds featuring Nicolas Cage and Angelina Jolie. As I’m sure you remember, Nicholas Cage, or Randall “Memphis” Raines, is racing against time with his old crew to boost 50 cars in order to save his brother’s life. The last car on the list is the elusive Eleanor, a Shelby Mustang given a huge personality and is as big of a star, if not bigger, than the big household name actors in the movie. How can you forget that crazy police chase through Long Beach?

You could explain the car you were referring to as, Eleanor, and everybody knows exactly you’re talking about. The Mustang was quite a hit in the remake with it playing the role of the ’73 Ford Mustang Mach 1 in the original film that was released in 1974.

Steve Stanford, famed Hot Rod illustrator, was actually called to draw the concept for Eleanor which was turned into the physical Eleanor shown in the movie.

Chris Routledge Managing Director at COYS said, “The Eleanor Mustang is one of only two original cars in private hands. We are offering an unrepeatable opportunity to acquire one of the cars that actually appeared in the movie and which will undoubtedly increase in value in years to come.”

The “star” of the film, Eleanor, will be hitting the auction block on January 14th and will likely fetch more than £100,000. It is number seven of twelve that were used and this one was apparently used for some of the driving scenes. Can you believe that five were totaled out during filming? OUCH!

The 289-cubic-inch V8 was replaced by a 351 Ford Racing engine with a 700cfm Holley 4-barrel carb and a ‘big’ camshaft. It features a modified suspension plus some Wilwood brakes. The side exhaust was not functional during filming, but is now perfectly functional. It also features wide rear arches, a huge bonnet, deep front valance, side skirts, integrated boot spoiler, new grille, PIAA lights and 17-inch Schmidt alloy wheels.

Driving Difference

Since I’ve gotten the 4 speed ( T-10 from 1967 Shelby) in the Mustang, I’ve been driving it a lot more.  I’m surprised at how much of an improvement it has made in the drive ability.  Of course there is more power going to the ground which is remarkable and the RPMs are put to much better used.  The original three speed top out pretty quickly and nothing left but engine noise.

Of course with more power hitting the ground, my current tires (wide and hard) tend to grip a lot less and spinning them through 2nd gear is common.  That will required some new, softer tread before long.

After driving the Mustang a few days in a row, I took the Vette to work.  Now you would expect there to be a difference, especially with the 120 hp disparagement in power  the Vette (about 420) and the Stang (about 300 – maybe a bit less) , but what I notice is how both cars arrive at top speed.

Both car’s like to launch, but the Vette does so with much less rear hunching then the Mustang.  The Vette feels lighter as it gets up to power – less down force on the road.  The Mustang is much different.  You can feel it, feeling the road.  I can actually feel the power longer and deeper in the Mustang as it move on up through the RMPs and the gears.

I think I’m ready to at a tach to the Mustang, I need to see the RPMs it’s turning out and then I’m going to have it dyno’ed.  It will be a good baseline before I get the  351 CJ head and intake installed.

Thanks for reading

Tim

 

Valiants Down-Under

I enjoy the off-beat (as in not in the top 20 collectible) cars.  And they really have some of those ‘down-under”.  I grabbed this from this site

I  LOVE Valiant cars!

Found this one in Yarraville, Melbourne.

 Thanks for Reading

Tim

The Cars of Cuba: Photos and stories from Havana

I hope you can view this article.  Has some great cars – although the saying “keep the shiny side up”  doesn’t really translate – these just don’t have one.

I’d love to spend time wandering around Cuba, just to look at the cars.

The Cars of Cuba: Photos and stories from Havana.

This is from Hagerty Insurance Company.

Thanks for reading.

Tim

Alice Cooper’s Classic Ford Mustang To Cross Barrett-Jackson Auction

I’m hoping to get a few shots of it when I’m there.
Posted by on January 2, 2012 – 0 Comments

alice cooper

Any Alice Cooper fans out there? If you worship Mr. Cooper plus love classic ‘Stangs, the best of both worlds is about to cross the auction block at Barrett-Jackson this month. A red 1965 classic Ford Mustang with a 4-speed automatic 289 V-8 and only 35,915 miles. Supposedly fit his golf clubs in the trunk perfectly!

Here is an opportunity to own Alice Cooper’s 1965 Ford Mustang fastback with 35,915 original miles. Alice used this car for the Golf courses, going to the mall and dinner from time to time. We will include a set of Calloway golf clubs for the new owner of the car.


Source: [Barrett-Jackson]

Engine Line Up – 1973 Ford – Mustangs

The engines for the 1973 Mustangs pretty well with the rest of the matched up the other models engines, but with some minor “tweaks”.

You couldn’t get a Mustang with a 4 cylinder (yet) but you could get with the standard 6.  This was the 250 version, (250 cubic inches of displacement) the bore and stroke was 3.68 x 3.91 also used in the Torino.  Topping it with a single barrel Motocraft carb and coupled with a compression ratio of 8.0:1 gave it a ground pounding horse power rating of 88 (Oh don’t worry, it gets worse in 1974).

302 remained the same for the Mustang and was the standard for the Mach 1.  The 351’s (Cleveland and Windsor were available and they really remained the same as those for the other models.

Now you might be saying, ‘Well Tim, seems like you typed yourself in to a corner here.  Those engines are the same.”  But here is what made the differences  – options!!!

With special intakes, valve springs, dampers, large 4300 D carbs, 2.5 inch diameter dual exhaust outlets and modified cam, you now talking increased breathing and exhaling capacity. Which we all know means…say it with me…..”MORE HORSE POWER!!!!!”   But how much? I’m glad you asked.

The 351 with these types of option produced between 246 and 266 horse power.  The 302 doesn’t show being configured with anything other than the stock options.

1973 351 Cleveland 2 barrel Intake

'73 351 Windsor 4 barrel intake.

Why didn’t they put the 400’s in the Mustang????

Thanks for reading.

Tim

Bloomington Gold moves again | Hemmings Blog: Classic and collectible cars and parts

All Corvette Show

Bloomington Gold moves again | Hemmings Blog: Classic and collectible cars and parts.

The world’s most significant all-Corvette show is moving back to central Illinois. After nearly a decade of being held at the Pheasant Run Resort in St. Charles, Bloomington Gold will be moving about 115 miles south to the town of Champaign for 2013, near where it first began nearly four decades ago.

According to Bloomington Gold CEO, David Burroughs, “Although it will be hard to beat the beautiful fairways of Pheasant Run, input from Corvette-owning customers wanted more opportunity for socializing and driving events as part of the entire Corvette show experience. It needed to become more dynamic.”

David went on to say: “Our customers own Corvettes because they are fun to drive. So, we needed a venue that not only served our exhibitors and customers who buy/sell and certify Corvettes, but also a venue that makes it easy and fun to navigate to/from and around the community before, during, and after the show. Therefore, we needed a small-town atmosphere with big-town hotels, great facilities, and quick escape routes to miles of country roads. Champaign, Illinois, has the smaller-town atmosphere, and the University of Illinois Assembly Hall grounds have everything else.”

So mark your calendar for June 27-30, 2013. Not only will this be the first year for the new venue, but it will also be the show’s 40th anniversary. And if you’ve ever attended one of the Bloomington Gold shows, you’ll know that there’s something very special planned that every Corvette enthusiast will not want to miss. In the meantime, the 2012 edition of Bloomington Gold will remain in St. Charles and take place June 21-24. For more information, visit BloomingtonGold.com.