73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

Did you think I sold #ProjectSportsRoof?  Nope.  I’ve been busy and I’ve been serving as editor to another cool project – my constant reader Bill’s ’68 Plymouth RoadRunner (#ProjectBeepBeep).

However, I have been doing some work on the sports roof and in this video you’ll see a little bling under the hood (not sure I like now that it’s done…but it’s easy to swap out).  There is also a few venting and vacuum issue I need to deal with and you’ll see those in the video.

 


Here’s a look at the Vapor Canister vs the Vacuum Canister.

Vapor Canister

Vacuum Canister

As I mentioned in the video, the vapor canister was missing from the engine bay and the fuel vapor line was running into the vacuum canister and then vented to the stock air cleaning.  After some research and help from the guys over on 7173 Mustangs forum I realized the problem and it’s an easy fix…although the vapor canister is pricey – without the charcoal!!!  (: ^ 0 ).

Coming up next some more work on the engine bay.

Thanks for reading

Tim

#ProjectSportsRoof

 

 

 

 

 

 

 

1973 Mustang – Project Sports Roof – Vacuum System Part II

Thanks for checking on #ProjectSportsRoof.   So here is the last set of initial questions. Here is an image of the current set up: Any diagram I find has the hose vacuum from the Distr going to the Valve assy. The Valve assy has nothing attached which is located on the front …

1973 Mustang – Engine Bay Work

If you look back at #ProjectSportsRoof post you’ll see the condition engine bay.  During those videos I mentioned that I was going to clean it up and hit it with a rattle can.  Again this isn’t going to be a concours restoration, it’s going to look nice and it’s going …

1973 Mustang – Project Sports Roof – Vacuum System Part II

Thanks for checking on #ProjectSportsRoof.   So here is the last set of initial questions. Here is an image of the current set up: Any diagram I find has the hose vacuum from the Distr going to the Valve assy. The Valve assy has nothing attached which is located on the front …

 

 

 

Tagged , , , , , , , . Bookmark the permalink.

2 Responses to 73 Mustang (Project SportsRoof) Engine Dress Up and Venting/Vacuum

  1. Bill says:

    Beautiful carb!
    Good you are straightening out the vacuum system. With power brakes you want that reserve canister.
    When is the engine starting ceremony?

Tell me what you think!!