460 CUBIC INCHES 575 HP CRATE ENGINE FRONT SUMP. | Part Details for M-6007-Z460FFT* | Ford Racing Performance Parts

460 CUBIC INCHES 575 HP CRATE ENGINE FRONT SUMP. | Part Details for M-6007-Z460FFT* | Ford Racing Performance Parts.

Ford Racing has taken its Boss Block to the max with the biggest small block Windsor crate engine ever – the Z460.  With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track.

The foundation of Z460 is the legendary Ford Racing Boss block topped off with high port/high flow Z-Heads.  Premium components from the best aftermarket companies are used throughout the engine, like a SCAT® forged steel crankshaft, SCAT® forged H-beam connecting rods, forged Mahle® pistons and Clevite® bearings.  And every Ford Racing Z460 engine is hand assembled in the U.S. with performance clearances.

 575 Horsepower – 575 Lb.Ft. Torque

  • Engine type:  351 based small block Ford
  • Displacement (cu in): 460
  • Bore x stroke (in): 4.150″ bore x 4.250″ stroke
  • Block: Boss 351 9.5″ deck
  • Crankshaft: SCAT® Forged Steel
  • Connecting Rods: SCAT® forged steel H-beam 6.125-inch length connecting rods
  • Pistons: Forged Mahle® w/ floating wrist pin
  • Camshaft type: Hydraulic Roller
  • Camshaft lift (in): .594″/.618″
  • Camshaft Duration (@.050 in): 242°/248°
  • Cylinder Heads: Ford Racing M-6049-Z304DA Aluminum “Z” Cylinder Heads
  • Valve size (in): 2.02 intake 1.60 exhaust
  • Compression ratio: 10.0:1 (nominal)
  • Rocker arms : Ford Racing M-6564-F351 Roller Rocker arms
  • Rocker arm ratio: 1.65:1
  • Vibration Damper – Ford Racing M-6316-D302 SFI Approved
  • Valve Covers: Ford Racing cast aluminum – silver painted finish
  • Oil Pan: Steel with deep front (9 quart) or rear sump (7 quart) pan with louvered windage tray and crankshaft scraper – 9 quart capacity (M-6675-FT351 front sump or M-6675-DRS351 rear sump))
  • Water pump: Ford Racing M-8501-G351 included – long type – standard rotation
  • Includes Ford Racing M-9439-A50 intake manifold gaskets
  • Distributor: not included. Steel distributor gear required.
  • Required fuel: Premium Unleaded
  • Ignition timing: 32° at 4,000 RPM
  • Maximum recommended rpm: 5,600 RPM
  • Balanced: Internal – use neutral balance flywheel
  • Recommended intake: Edelbrock PN 2924 Super Victor (not included)
  • New block, oil and water pump, performance oil pan and high-performance harmonic balancer
  • Engine power ratings achieved with Edelbrock® Super Victor intake, Holley® 850 CFM carburetor, long tube headers.
  • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required.  Call the Ford Racing Techline at (800) FORD788 for more information.

 

M-6007-Z460FFT

 

Thanks for reading

Tim

Tagged . Bookmark the permalink.

Let me hear from you!!! Drop a note!!