Product Review – Griot’s Garage – Long Lasting Tire Dressing Prt 2

Before I attempted to use the tire dressing, I washed the car and gave the rubber a good scrubbing.  For the actual application I used an old sock.  When I first poured the dressing on to the sock, it was a bit runny, but still has some consistency.  Keep in mind the temperature, 105 degrees in my garage where I  stored it and where I was applying it and about 108 outside.  I was a bit concerned, because with two show cars (one, a trophy winner and white!!) and having the tire dressing flung all over the paint isn’t cool, which is exactly what I won’t use the Eagle One brand.

I gave 3 of my 07 Vette’s tires two coats and I have one 3 coats.  Take a look a the results.

First coat:

First coat - not even - most likely due to the sock.

Another first coat

An additional note – these pics were taken in my garage with a less than optimal source light.

Now with the Vette  moved out into the sun and two coats.

Two coats - pretty nice coverage.

I really liked the 3rd application.

3 coats created a good look

So know I’ve given each tire 3 coats and since I don’t do this for a living, the next test had to wait.  I had a few ‘honey-do’ chores, before I took the Vette for a drive.  So the car sat in the sun for about an hour – temp was about 108.

With the to do list completed, I  needed  to take the Vette out to toss some air in the tires.  Yes…average guy tools = small compressor  that doesn’t hold enough air to top off four tires..heck…it can barely do one…got to upgrade one of these days.

Here is where the rubber meets the road and hopefully the tire dressing doesn’t meet the paint, but first a note. I did in fact drip some of Griot’s Garage – Long Lasting Tire Dressing on my chrome wheels and sure enough it cleans off with moist rag.

Take a quick spin about 1.5 miles from the house and I don’t drive 30 miles an hour…the tires spun pretty hard the entire trip.

At the air pump here is what I saw.

Light running

Same here.

I’ll mention, again the temperature and I think that might have something to do with it, but really this wasn’t bad.  The real test was whether or not it spread to the paint and since it’s a black car you aren’t going to see it as easily – it’s a clear liquid as well.  So a quick swipe with a white showed me all I needed to know, it came back clean.

So I’m pretty pleased with how the product worked.

As far as the “long-lasting” part.  I’m not going to be able to render a fair opinion yet for a couple of reason:

1.  I just put it on

2.  We don’t get much rain here in Southern AZ  but it is the monsoon season so it has rained 3 times since the application.

So that will have to be in Part 3 later on.

I need to add a few notes as I always do when I review a product. (Some of that laws school was worth the $$$.)

I don’t work for Griot’s, my only connection is that I”m on their mailing list.  This is the first product I’ve purchased from them.

I did see a tweet from someone related to Griot’s Garage commenting on this review, but don’t know the individual.

I’m not Consumer Reports or Consumer Digest.  I only comment on products I use in my search for “stuff” that works well for me.

Whenever I write about a product I try to follow the  instructions provided and always give any variances or events/conditions that might impact the outcome.

Thanks for reading.

Tim

Product Review – Griot’s Garage – Long Lasting Tire Dressing

From time to time I check out a product that I hear about, in this case, from a repetitive mail from Griot’s garage.  This is a catalog of sorts, with a lot of merchandise and everything you need to spruce up your ride.

Thier “Long Lasting Tire Dressing” is the first item I’ve tried.

If you recall I did a review a while back on a tire gel here is the link: ” Like and Don’t Like – Products (Tire Gel) and Tools (Thread Chasers)”
http://wp.me/pKHNM-aJ

Here is my new try:

[vodpod id=Video.13290806&w=425&h=350&fv=file%3Dhttp%253A%252F%252Fvid299.photobucket.com%252Falbums%252Fmm296%252Ftimsweet2200%252FVIDEO0058.mp4]

Tire Dressing, posted with vodpod
Now before we start, the bottle you see in the video has instructions and to be fair, I’ll give you any variations.
The direction say, roughly, clean the tire, apply with application pad and that a light application will give you a shine and subsequent will increase the luster.  Not much there to go on.
Now you need to know that I applied the dressing with an old sock.  Most manufactures always try to sell something extra and kt, which is an “applicator”, the magic potion and a terry cloth/micro fiber towel.  I normally don’t go for that sales pitch.  So that was the only deviation.
A couple more variables:
1.  The dressing was stored in my garage.  The temperature in there today was about 105 degrees. I applied the dressing while the car was in the garage.
2. The temp outside was about 108.
3.  As you will see my Corvette’s tires have small sidewalls and a lot of small raised text and logo.
Ok so here are a couple before pics:

Before, notice the off-color

More of the discolor and you can see there isn't must sidewall.

Lots of raised lettering

Raised logo

Coming  up application and an opinion.

Thanks for reading.
Tim

Car Production Numbers. They Made How Many? 1926

Are you like me and like numbers and history?

Here are some numbers for car production for 1996.

At the number one spot was Ford with 1,426,612 followed by:

Chevy                    547,724

Buick                     266,753

Dodge                   265,000

Hudson/Essex   227,508

Willys-Overland/Whippet       182,000

Chrysler              135,520

Pontiac/Oakland     133,604

Ford was really knocking out some cars.

Here is a 1926 Willys-Overland Whippet

 

1926 Essex

 

In 1926 GM purchased all the shares of Fisher Body Company from the Fisher brothers and build a new building in 1927.

1926 was the first year for Pontiac, is sported a 40 bhp, 187 CID L-head 6.

Thanks for reading

Tim

 

Mustang Upholstery Part IV

After removing the seat track I had to remove the seat stops.

There are two and easily removed.

Next I started removing the upholstery wire.  These  pliers hook inside the wire and separate them for removal.

Removal

Here are the wires removed.  They can be reused if you want to straighten them out.

Wires

 

Mostly removed.

Part way off however one small deal to handle

 

Thinking I was on the down hill side with the removal of the old upholstery, I ran into……the …..tuck!!!  This consisted of a wire running through a cloth sleeve and the wire is attached to the springs with the hog wire.

Top Arrow is the cloth sleeve with the wire running through it. Bottom arrow is the hog wire crimped to the springs underneath.

Basically the tuck is how they separate the bottom of the seat and the cushions edges, which with vinyl that helps keeps you backside in the seat during those high-speed maneuvers.

Ok, this was the learning seat.  I was too busy learning to do too much photography so I’ll to more with the back to this seat and the next.

BUT…………………………..here is my very first seat bottom..completed.

 

 

 

More coming up soon.

Thanks for reading

Tim.

 

Mustang Upholstery Part III

Sorry it’s been more than a couple days…a week plus actually.  But hey, it 115 degrees in my garage.

So I removed the seat and inspected the underside.

Again this was my first upholstery job, ever.  So removal of the old upholstery on this first seat was a learning experience so I didn’t get too many shots.

Here is a shot of the seat out of the car.

Seat Out

You have to remove the plastic covers for the hinges and the rest of the hardware to separate the bottom from the back.

Just a couple of screws to remove the covers, hinges and hardware

Here is the underside of the seat with the track hardware still attached.

Back removed the track still in place.

The track is remove with 4 star bolts.  Be careful use the proper socket, I happened to have just purchased a huge set of tools (a bit more the ‘average guy’ might have) that had the necessary socket set.  If you don’t have those, find one of those universal sockets that ‘form’ to bolt.

4 star bolts hold the track to the frame of the seat bottom

Bolt and socket

Part IV coming up tomorrow.

Thanks for reading

Tim

How Many Did They Make? 1902

There is a lot of emphasis on numbers for production when it comes to collector cars and I get that, who wouldn’t what a low product something or other.

So I got to thinking about production numbers and thought it would be interesting post some up from time to time.

Now in 1902 there weren’t many cars being produced but there were 8 makers.

1.  Locomobile                                                                           2,750

2.  Oldsmobile                                                                        2,500

3.  Rambler                                                                            1,500

4. White                                                                                     385

5.  Knox                                                                                     250

6. Packard                                                                                 179

7.  Stanley                                                                                  170

8.  Union                                                                                      60

1902 White Auto

Knox Truck Circa 1902

 
 
Thanks for reading
Tim
 
 
 

 

Auto Factoids 7/10 -7/16 Checker – VW

Back by popular demand Auto Factoids.

July 12  – The first Checker automobile was produced in 1922.

–   It was a merger of sorts between Commonwealth
Motors (making bodies for cab companies as ‘Mogul’) and Morris Markin’s  Markin Autobody.

–  The engine is a 4 cylinder Buda Model Q with 27 hp.

–   1935 Checker used the Y-8 engine (Lycoming engine) and the Y-6 engine ( a Continental six-cylinder).

–   The last Checker autos were produced in 1982 with  a 229-cubic-inch (3.8 liter) V-6 engine and automatic 3-speed transmission.

1922 Checker Cab

1982 Checker Cab

July 14 – VW debuts the Karmann Ghia in 1955

–   360,000 coupes and about 80,000 convertibles we made between 1955 and 1974.

–   I will own one of these eventually.

1955 Karmann Ghia

1974 VW Karmann Ghia

Thanks for reading.

Tim

Project Pontiac 1949 Silver Streak Delivery Van

I have a co-worker who from time to time has mentioned his Pontiac project and we’ve ‘bench restored’ a few times.  But I’d never actually saw this car , nearly a picture.  But thanks to our first real rain here in Southern AZ since last year I think, and the fact that we don’t do our monsoon season any other way than “harsh”  my  co-worker’s (we’ll call him ‘Mike’…’cause that’s actually his name) neighbor had a tree that suffered enough wind damage it and to be taken down.  So Mike had to move the car, parked it behind his daily driver.  Got up this morning and decied..heck, I’ll drive it to work.

And that’s how I got the pic of the 1949 Pontiac Silver Streak Delivery Van, all original  and get this…..his family is the only owner the beauty every had.  His grand father purchased it new.  More to come on this one but here are some pics.

1949 Pontiac Delivery Van

 

Back Side of the '49 Silver Streak Delivery Van Pontiac style.

 

Thanks for reading.

Tim