1973 Mustang SportsRoof – Carpet Laid

Thanks for picking backup with blogging of the work done on the 1973 Mustang Sports Roof (#ProjectSportsRoof).

The floors are done and the heat and sound barrier are completed and it’s time for the carpet.

I’ve seen some pretty awful quality carpet for cars and I’ve had friends that attempted to use the one piece kits with not great success.  I chose to go with ACC Carpet 2 piece set.  Because my car was ordered special ordered with the Mach I Interior I went with their “Original Style Molded Fastback Mach I for 1971-1973” (CJ’s Part Number MC9-V).  It is really well-formed and pre-cut for steering column and even dimmer switch.

The pieces come folded in a box and needs to be laid out flat for a while before installing. Luckily I live in Arizona and the sun makes quick work for that.

Carpet2

Here are the two pieces laid out on the hood of #ProjectSportsRoof.

Carpet1a

This image shows the pre-cuts and forming in the front piece.  ‘A’ is the cutout for the steering Column, ‘B’ is the quality built-in vinyl floor mat, ‘C’ is the cutout for the dimmer switch and  ‘D’ is the very well-formed door jamb and finally ‘E’ is the transmission tunnel formed part.

Here’s a pick of how it just lays there and conforms to the floor.

Carpet5

Now check out the full shot with the front sections in place and the shift bezel in place.  Looks pretty good, yes?

Carpet8a

At point ‘A’ you can see the contour of the floor mat portions of the carpet piece.  ‘B’ is the hole with the seat mounting stud protruding (you have to cut that) and both ‘C’ locations show just a simple X cut to allow the seat bolts to slip through.

This last still shot is with the rear pieces laid out.

Carpet16a

 

You can see the forming in the carpet where the rear mount of the front set lays.  The circle is where I had to cut to allow the bolt to slide in.

Here is  little video.

 

I’m very please with this carpet.  As of this blogging I haven’t finished trimming it. In real-time it’s been a few months.  I had to put the seats back in and get it to a charity car show.   Before I had a chance to get back to carpet, the Cleveland developed a bottom end knock and that’s were we are today.  I can finish up more interior work while the engine is out.

The 351C rebuild is coming up next for #ProjectSportsRoof.

Thanks for reading!!!

Tim

1973 Mustang SportsRoof

1973 Mustang SportsRoof

Average Guy’s Car Restorations, Mods, and Racing

Welcome back to #ProjectSportsRoof. With the floor pans welding, sealing and coating finished the next step was to apply the heat and sound barrier. This is …
Great American Muscle Cars – Community – Google+

Welcome back to #ProjectSportsRoof. With the floor pans welding, sealing and coating finished the next step was to apply the heat and sound barrier. This is …

 

Tagged , , , , , , , , . Bookmark the permalink.

Let me hear from you!!! Drop a note!!